diff options
| -rw-r--r-- | docs/ch11-services.rst | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/docs/ch11-services.rst b/docs/ch11-services.rst index 2812a31a..43397d38 100644 --- a/docs/ch11-services.rst +++ b/docs/ch11-services.rst @@ -640,3 +640,154 @@ servers: set service dns forwarding name-server 2001:4860:4860::8844 set service dns forwarding listen-on 'eth1' +Dynamic DNS +----------- + +VyOS is able to update a remote DNS record when an interface gets a new IP +address. In order to do so, VyOS includes ddclient_, a perl script written for +this exact purpose. + +ddclient_ uses two methods to update a DNS record. The first one will send +updates directly to the DNS daemon, in compliance with RFC2136_. The second +one involves a third party service, like DynDNS.com or any other similar +website. This method uses HTTP requests to transmit the new IP address. You +can configure both in VyOS. + +VyOS CLI and RFC2136 +^^^^^^^^^^^^^^^^^^^^ + +First, create an RFC2136_ config node : + +.. code-block:: sh + + edit service dns dynamic interface eth0 rfc2136 <confignodename> + +Present your RNDC key to ddclient : + +.. code-block:: sh + + set key /config/dyndns/mydnsserver.rndc.key + +Set the DNS server IP/FQDN : + +.. code-block:: sh + + set server dns.mydomain.com + +Set the NS zone to be updated : + +.. code-block:: sh + + set zone mydomain.com + +Set the records to be updated : + +.. code-block:: sh + + set record dyn + set record dyn2 + +You can optionally set a TTL (note : default value is 600 seconds) : + +.. code-block:: sh + + set ttl 600 + +This will generate the following ddclient config blocks: + +.. code-block:: sh + + server=dns.mydomain.com + protocol=nsupdate + password=/config/dyndns/mydnsserver.rndc.key + ttl=600 + zone=mydomain.com + dyn + server=dns.mydomain.com + protocol=nsupdate + password=/config/dyndns/mydnsserver.rndc.key + ttl=600 + zone=mydomain.com + dyn2 + +You can also keep a different dns zone updated. Just create a new config node: + +.. code-block:: sh + + edit service dns dynamic interface eth0 rfc2136 <confignode2> + +VyOS CLI and HTTP dynamic DNS services +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +VyOS is also able to use any service relying on protocols supported by ddclient. + +To use such a service, you must define a login, a password, one or multiple +hostnames, a protocol and a server. + +.. code-block:: sh + + edit service dns dynamic interface eth0 service HeNet + set login my-login # set password my-password + set host-name my-tunnel-id + set protocol dyndns2 + set server ipv4.tunnelbroker.net + +VyOS is also shipped with a list of known services. You don't need to set the +protocol and server value as VyOS has defaults provided for those. These are +the services VyOS knows about: + +* afraid +* changeip +* dnspark +* dslreports +* dyndns +* easydns +* namecheap +* noip +* zoneedit + +To use DynDNS for example: + +.. code-block:: sh + + edit service dns dynamic interface eth0 service dyndns + set login my-login + set password my-password + set host-name my-dyndns-hostname + +It's possible to use multiple services : + +.. code-block:: sh + + edit service dns dynamic interface eth0 service dyndns + set login my-login + set password my-password + set host-name my-dyndns-hostname + edit service dns dynamic interface eth0 service HeNet + set login my-login + set password my-password + set host-name my-tunnel-id + set protocol dyndns2 + set server ipv4.tunnelbroker.net + +ddclient behind NAT +^^^^^^^^^^^^^^^^^^^ + +By default, ddclient will update a dynamic dns record using the IP address +directly attached to the interface. If your VyOS instance is behind NAT, your +record will be updated to point to your internal IP. + +ddclient_ has another way to determine the WAN IP address. This is controlled +by these two options: + +.. code-block:: sh + + set service dns dynamic interface eth0 use-web url + set service dns dynamic interface eth0 use-web skip + +ddclient_ will load the webpage at `[url]` and will try to extract an IP +address for the response. ddclient_ will skip any address located before the +string set in `[skip]`. + +.. _ddclient: http://sourceforge.net/p/ddclient/wiki/Home/ +.. _RFC2136: https://www.ietf.org/rfc/rfc2136.txt |