diff options
| -rw-r--r-- | docs/configuration/interfaces/wireless.rst | 21 | ||||
| -rw-r--r-- | docs/installation/vyos-on-baremetal.rst | 2 |
2 files changed, 23 insertions, 0 deletions
diff --git a/docs/configuration/interfaces/wireless.rst b/docs/configuration/interfaces/wireless.rst index b775011f..231652a0 100644 --- a/docs/configuration/interfaces/wireless.rst +++ b/docs/configuration/interfaces/wireless.rst @@ -590,3 +590,24 @@ To get it to work as an access point with this configuration you will need to set up a DHCP server to work with that network. You can - of course - also bridge the Wireless interface with any configured bridge (:ref:`bridge-interface`) on the system. + +.. _wireless-interface-intel-ax200: + +Intel AX200 +=========== + +The Intel AX200 card does not work out of the box in AP mode, see +https://unix.stackexchange.com/questions/598275/intel-ax200-ap-mode. You can +still put this card into AP mode using the following configuration: + +.. stop_vyoslinter +.. code-block:: none + + set interfaces wireless wlan0 channel '1' + set interfaces wireless wlan0 country-code 'us' + set interfaces wireless wlan0 mode 'n' + set interfaces wireless wlan0 physical-device 'phy0' + set interfaces wireless wlan0 ssid 'VyOS' + set interfaces wireless wlan0 type 'access-point' + +.. start_vyoslinter diff --git a/docs/installation/vyos-on-baremetal.rst b/docs/installation/vyos-on-baremetal.rst index 81d04f0d..7eca7250 100644 --- a/docs/installation/vyos-on-baremetal.rst +++ b/docs/installation/vyos-on-baremetal.rst @@ -113,6 +113,8 @@ Refer to :ref:`wireless-interface` for additional information, below listed modules have been tested successfully on this Hardware platform: * Compex WLE900VX mini-PCIe WiFi module, only supported in mPCIe slot 1. +* Intel Corporation AX200 mini-PCIe WiFi module, only supported in mPCIe slot 1. + (see :ref:`wireless-interface-intel-ax200`) WWAN """" |