diff options
| -rw-r--r-- | docs/interfaces/addresses.rst | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/docs/interfaces/addresses.rst b/docs/interfaces/addresses.rst index 97781c09..51d2e7e5 100644 --- a/docs/interfaces/addresses.rst +++ b/docs/interfaces/addresses.rst @@ -117,6 +117,62 @@ Examples: set interfaces pseudo-ethernet peth0 ipv6 address eui64 2001:db8:aa::/64 +Router Advertisements +********************* +Router advertisements are described in `RFC4861 section 4.2`_. They are part of what is known as SLAAC (Stateless Address Autoconfiguration). + +To enable or disable, use: + +.. code-block:: sh + + set interfaces <interface> ipv6 router-advert send-advert <true or false> + + +To set the options described in "Router Advertisement Message Format": + +.. code-block:: sh + + vyos@vyos# set interfaces <interface> ipv6 router-advert + Possible completions: + cur-hop-limit Value to be placed in the "Current Hop Limit" field in RAs + default-lifetime Value to be placed in "Router Lifetime" field in RAs + default-preference Default router preference + link-mtu Value of link MTU to place in RAs + managed-flag Value for "managed address configuration" flag in RAs + max-interval Maximum interval between unsolicited multicast RAs + min-interval Minimum interval between unsolicited multicast RAs + + name-server IPv6 address of a Recursive DNS Server + other-config-flag Value to be placed in the "other configuration" flag in RAs + +> prefix IPv6 prefix to be advertised in Router Advertisements (RAs) + reachable-time Value to be placed in "Reachable Time" field in RAs + retrans-timer Value to place in "Retrans Timer" field in RAs. + send-advert Enable/disable sending RAs + + +**Prefix Information** + +Prefix information is described in `RFC4861 section 4.6.2`_ + +.. code-block:: sh + + vyos@vyos# set interfaces <interface> ipv6 router-advert prefix <h:h:h:h:h:h:h:h/x> + Possible completions: + autonomous-flag Whether prefix can be used for address auto-configuration + on-link-flag Flag that prefix can be used for on-link determination + preferred-lifetime Time in seconds that the prefix will remain preferred + valid-lifetime Time in seconds that the prefix will remain valid + +**Receiving Router Advertisements** + +To receive and accept RAs on an interface, you need to enable it with the following configuration command + +.. code-block:: sh + + vyos@vyos# set system sysctl custom net.ipv6.conf.<interface name>.accept_ra value 2 + + +.. _`RFC4861 section 4.6.2`: https://tools.ietf.org/html/rfc4861#section-4.6.2 +.. _`RFC4861 section 4.2`: https://tools.ietf.org/html/rfc4861#section-4.2 .. _RFC4862: https://tools.ietf.org/html/rfc4862 .. _RFC4291: http://tools.ietf.org/html/rfc4291#section-2.5.1 |