summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/configuration/firewall/general-legacy.rst11
-rw-r--r--docs/quick-start.rst265
2 files changed, 210 insertions, 66 deletions
diff --git a/docs/configuration/firewall/general-legacy.rst b/docs/configuration/firewall/general-legacy.rst
index 2e6b0061..041dd8aa 100644
--- a/docs/configuration/firewall/general-legacy.rst
+++ b/docs/configuration/firewall/general-legacy.rst
@@ -424,11 +424,13 @@ There are a lot of matching criteria against which the package can be tested.
An arbitrary netmask can be applied to mask addresses to only match against
a specific portion. This is particularly useful with IPv6 and a zone-based
firewall as rules will remain valid if the IPv6 prefix changes and the host
- portion of systems IPv6 address is static (for example, with SLAAC or `tokenised IPv6 addresses
- <https://datatracker.ietf.org/doc/id/draft-chown-6man-tokenised-ipv6-identifiers-02.txt>`_)
-
+ portion of systems IPv6 address is static (for example, with SLAAC or
+ `tokenised IPv6 addresses
+ <https://datatracker.ietf.org/doc/id/draft-chown-6man-tokenised-ipv6-identifiers-02.txt>`_).
+
This functions for both individual addresses and address groups.
+ .. stop_vyoslinter
.. code-block:: none
# Match any IPv6 address with the suffix ::0000:0000:0000:beef
@@ -442,6 +444,7 @@ There are a lot of matching criteria against which the package can be tested.
set firewall group ipv6-address-group WEBSERVERS address ::2000
set firewall name WAN-LAN-v6 rule 200 source group address-group WEBSERVERS
set firewall name WAN-LAN-v6 rule 200 source address-mask ::ffff:ffff:ffff:ffff
+ .. start_vyoslinter
.. cfgcmd:: set firewall name <name> rule <1-999999> source fqdn <fqdn>
.. cfgcmd:: set firewall name <name> rule <1-999999> destination fqdn <fqdn>
@@ -1048,4 +1051,4 @@ Update geoip database
.. opcmd:: update geoip
- Command used to update GeoIP database and firewall sets. \ No newline at end of file
+ Command used to update GeoIP database and firewall sets.
diff --git a/docs/quick-start.rst b/docs/quick-start.rst
index a6055576..5f7ebbe3 100644
--- a/docs/quick-start.rst
+++ b/docs/quick-start.rst
@@ -7,16 +7,16 @@ Quick Start
This chapter will guide you on how to get up to speed quickly using your new
VyOS system. It will show you a very basic configuration example that will
provide a :ref:`nat` gateway for a device with two network interfaces
-(`eth0` and `eth1`).
+(``eth0`` and ``eth1``).
.. _quick-start-configuration-mode:
Configuration Mode
##################
-By default, VyOS is in operational mode, and the command prompt displays a `$`.
-To configure VyOS, you will need to enter configuration mode, resulting in the
-command prompt displaying a `#`, as demonstrated below:
+By default, VyOS is in operational mode, and the command prompt displays
+a ``$``. To configure VyOS, you will need to enter configuration mode, resulting
+in the command prompt displaying a ``#``, as demonstrated below:
.. code-block:: none
@@ -43,10 +43,10 @@ the following command:
Interface Configuration
#######################
-* Your outside/WAN interface will be `eth0`. It will receive its interface
+* Your outside/WAN interface will be ``eth0``. It will receive its interface
address via DHCP.
-* Your internal/LAN interface will be `eth1`. It will use a static IP address
- of `192.168.0.1/24`.
+* Your internal/LAN interface will be ``eth1``. It will use a static IP address
+ of ``192.168.0.1/24``.
After switching to :ref:`quick-start-configuration-mode` issue the following
commands:
@@ -81,11 +81,11 @@ The following settings will configure DHCP and DNS services on
your internal/LAN network, where VyOS will act as the default gateway and
DNS server.
-* The default gateway and DNS recursor address will be `192.168.0.1/24`
-* The address range `192.168.0.2/24 - 192.168.0.8/24` will be reserved for
+* The default gateway and DNS recursor address will be ``192.168.0.1/24``
+* The address range ``192.168.0.2/24 - 192.168.0.8/24`` will be reserved for
static assignments
* DHCP clients will be assigned IP addresses within the range of
- `192.168.0.9 - 192.168.0.254` and have a domain name of `internal-network`
+ ``192.168.0.9 - 192.168.0.254`` and have a domain name of ``internal-network``
* DHCP leases will hold for one day (86400 seconds)
* VyOS will serve as a full DNS recursor, replacing the need to utilize Google,
Cloudflare, or other public DNS servers (which is good for privacy)
@@ -118,68 +118,210 @@ network via IP masquerade.
set nat source rule 100 source address '192.168.0.0/24'
set nat source rule 100 translation address masquerade
-
Firewall
########
-.. note:: Starting from VyOS 1.4-rolling-202308040557, a new firewall
- structure can be found on all vyos instalations. Documentation for most
- of the new firewall CLI can be found in the `firewall
- <https://docs.vyos.io/en/latest/configuration/firewall/general.html>`_
- chapter. The legacy firewall is still available for versions before
- 1.4-rolling-202308040557 and can be found in the :ref:`firewall-legacy`
- chapter. The examples in this section use the new firewall configuration
- commands.
-
-Add a set of firewall policies for our outside/WAN interface.
-
-This configuration creates a proper stateful firewall that blocks all traffic
-which was not initiated from the internal/LAN side first.
-
-.. code-block:: none
-
- set firewall ipv4 forward filter default-action 'drop'
- set firewall ipv4 forward filter rule 10 action 'accept'
- set firewall ipv4 forward filter rule 10 state established 'enable'
- set firewall ipv4 forward filter rule 10 state related 'enable'
- set firewall ipv4 forward filter rule 20 action 'drop'
- set firewall ipv4 forward filter rule 20 state invalid 'enable'
- set firewall ipv4 forward filter rule 30 inbound-interface interface-name 'eth1'
- set firewall ipv4 forward filter rule 30 action 'accept'
-
- set firewall ipv4 input filter default-action drop
- set firewall ipv4 input filter rule 10 action 'accept'
- set firewall ipv4 input filter rule 10 state established 'enable'
- set firewall ipv4 input filter rule 10 state related 'enable'
- set firewall ipv4 input filter rule 20 action 'drop'
- set firewall ipv4 input filter rule 20 state invalid 'enable'
+A new firewall structure—which uses the ``nftables`` backend, rather
+than ``iptables``—is available on all installations starting from
+VyOS ``1.4-rolling-202308040557``. The firewall supports creation of distinct,
+interlinked chains for each `Netfilter hook
+<https://wiki.nftables.org/wiki-nftables/index.php/Netfilter_hooks>`_
+and allows for more granular control over the packet filtering process.
+
+.. note:: Documentation for most of the new firewall CLI can be found in
+ the :ref:`firewall` chapter.The legacy firewall is still available
+ for versions before ``1.4-rolling-202308040557`` and can be found in the
+ :ref:`firewall-legacy` chapter. The examples in this section use the
+ new configuration.
+
+The firewall begins with the base ``filter`` tables you define for each of the
+``forward``, ``input``, and ``output`` Netfiter hooks. Each of these tables is
+populated with rules that are processed in order and can jump to other chains
+for more granular filtering.
+
+Configure Firewall Groups
+-------------------------
+
+To make firewall configuration easier, we can create groups of interfaces,
+networks, addresses, ports, and domains that describe different parts of
+our network. We can then use them for filtering within our firewall rulesets,
+allowing for more concise and readable configuration.
+
+In this case, we will create two interface groups—a ``WAN`` group for our
+interfaces connected to the public internet and a ``LAN`` group for the
+interfaces connected to our internal network. Additionally, we will create a
+network group, ``NET-INSIDE-v4``, that contains our internal subnet.
+
+.. code-block:: none
+
+ set firewall group interface-group WAN interface eth0
+ set firewall group interface-group LAN interface eth1
+ set firewall group network-group NET-INSIDE-v4 network '192.168.0.0/24'
+
+Configure Stateful Packet Filtering
+-----------------------------------
+
+With the new firewall structure, we have have a lot of flexibility in how we
+group and order our rules, as shown by the two alternative approaches below.
+
+Option 1: Common Chain
+^^^^^^^^^^^^^^^^^^^^^^
+
+We can create a common chain for stateful connection filtering of multiple
+interfaces (or multiple netfilter hooks on one interface). Those individual
+chains can then jump to the common chain for stateful connection filtering,
+returning to the original chain for further rule processing if no action is
+taken on the packet.
+
+The chain we will create is called ``CONN_FILTER`` and has three rules:
+
+- A default action of ``return``, which returns the packet back to the original
+ chain if no action is taken.
+- A rule to ``accept`` packets from established and related connections.
+- A rule to ``drop`` packets from invalid connections.
+
+.. code-block:: none
+
+ set firewall ipv4 name CONN_FILTER default-action 'return'
+
+ set firewall ipv4 name CONN_FILTER rule 10 action 'accept'
+ set firewall ipv4 name CONN_FILTER rule 10 state established 'enable'
+ set firewall ipv4 name CONN_FILTER rule 10 state related 'enable'
+
+ set firewall ipv4 name CONN_FILTER rule 20 action 'drop'
+ set firewall ipv4 name CONN_FILTER rule 20 state invalid 'enable'
+
+Then, we can jump to the common chain from both the ``forward`` and ``input``
+hooks as the first filtering rule in the respective chains:
+
+.. code-block:: none
+
+ set firewall ipv4 forward filter rule 10 action 'jump'
+ set firewall ipv4 forward filter rule 10 jump-target CONN_FILTER
+
+ set firewall ipv4 input filter rule 10 action 'jump'
+ set firewall ipv4 input filter rule 10 jump-target CONN_FILTER
+
+Option 2: Per-Hook Chain
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Alternatively, instead of configuring the ``CONN_FILTER`` chain described above,
+you can take the more traditional stateful connection filtering approach by
+creating rules on each hook's chain:
+
+.. code-block:: none
+
+ set firewall ipv4 forward filter rule 5 action 'accept'
+ set firewall ipv4 forward filter rule 5 state established 'enable'
+ set firewall ipv4 forward filter rule 5 state related 'enable'
+ set firewall ipv4 forward filter rule 10 action 'drop'
+ set firewall ipv4 forward filter rule 10 state invalid 'enable'
+
+ set firewall ipv4 input filter rule 5 action 'accept'
+ set firewall ipv4 input filter rule 5 state established 'enable'
+ set firewall ipv4 input filter rule 5 state related 'enable'
+ set firewall ipv4 input filter rule 10 action 'drop'
+ set firewall ipv4 input filter rule 10 state invalid 'enable'
+
+Block Incoming Traffic
+----------------------
+
+Now that we have configured stateful connection filtering to allow traffic from
+established and related connections, we can block all other incoming traffic
+addressed to our local network.
+
+Create a new chain (``OUTSIDE-IN``) which will drop all traffic that is not
+explicity allowed at some point in the chain. Then, we can jump to that chain
+from the ``forward`` hook when traffic is coming from the ``WAN`` interface
+group and is addressed to our local network.
+
+.. code-block:: none
+
+ set firewall ipv4 name OUTSIDE-IN default-action 'drop'
+
+ set firewall ipv4 forward filter rule 100 action jump
+ set firewall ipv4 forward filter rule 100 jump-target OUTSIDE-IN
+ set firewall ipv4 forward filter rule 100 inbound-interface interface-group WAN
+ set firewall ipv4 forward filter rule 100 destination group network-group NET-INSIDE-v4
+
+We should also block all traffic destinated to the router itself that isn't
+explicitly allowed at some point in the chain for the ``input`` hook. As
+we've already configured stateful packet filtering above, we only need to
+set the default action to ``drop``:
+
+.. code-block:: none
+
+ set firewall ipv4 input filter default-action 'drop'
+
+Allow Management Access
+---------------------------
+
+We can now configure access to the router itself, allowing SSH
+access from the inside/LAN network and rate limiting SSH access from the
+outside/WAN network.
+
+First, create a new dedicated chain (``VyOS_MANAGEMENT``) for management
+access, which returns to the parent chain if no action is taken. Add a rule
+to accept traffic from the ``LAN`` interface group:
+
+.. code-block:: none
+
+ set firewall ipv4 name VyOS_MANAGEMENT default-action 'return'
+
+Configure a rule on the ``input`` hook filter to jump to the ``VyOS_MANAGEMENT``
+chain when new connections are addressed to port 22 (SSH) on the router itself:
+
+.. code-block:: none
+
+ set firewall ipv4 input filter rule 20 action jump
+ set firewall ipv4 input filter rule 20 jump-target VyOS_MANAGEMENT
+ set firewall ipv4 input filter rule 20 destination port 22
+ set firewall ipv4 input filter rule 20 protocol tcp
+
+Finally, configure the ``VyOS_MANAGEMENT`` chain to accept connection from the
+``LAN`` interface group while limiting requests coming from the ``WAN``
+interface group to 4 per minute:
+
+.. code-block:: none
+
+ set firewall ipv4 name VyOS_MANAGEMENT rule 15 action 'accept'
+ set firewall ipv4 name VyOS_MANAGEMENT rule 15 inbound-interface interface-group 'LAN'
+
+ set firewall ipv4 name VyOS_MANAGEMENT rule 20 action 'drop'
+ set firewall ipv4 name VyOS_MANAGEMENT rule 20 recent count 4
+ set firewall ipv4 name VyOS_MANAGEMENT rule 20 recent time minute
+ set firewall ipv4 name VyOS_MANAGEMENT rule 20 state new enable
+ set firewall ipv4 name VyOS_MANAGEMENT rule 20 inbound-interface interface-group 'WAN'
+
+ set firewall ipv4 name VyOS_MANAGEMENT rule 21 action 'accept'
+ set firewall ipv4 name VyOS_MANAGEMENT rule 21 state new enable
+ set firewall ipv4 name VyOS_MANAGEMENT rule 21 inbound-interface interface-group 'WAN'
+
+Allow Access to Services
+------------------------
+
+Here we're allowing the router to respond to pings. Then, we can allow access to
+the DNS recursor we configured earlier, accepting traffic bound for port 53 from
+all hosts on the ``NET-INSIDE-v4`` network:
+
+.. code-block:: none
set firewall ipv4 input filter rule 30 action 'accept'
set firewall ipv4 input filter rule 30 icmp type-name 'echo-request'
set firewall ipv4 input filter rule 30 protocol 'icmp'
set firewall ipv4 input filter rule 30 state new 'enable'
-If you wanted to enable SSH access to your firewall from the outside/WAN
-interface, you could create some additional rules to allow that kind of
-traffic.
+ set firewall ipv4 input filter rule 40 action 'accept'
+ set firewall ipv4 input filter rule 40 destination port '53'
+ set firewall ipv4 input filter rule 40 protocol 'tcp_udp'
+ set firewall ipv4 input filter rule 40 source group network-group NET-INSIDE-v4
-These rules allow SSH traffic and rate limit it to 4 requests per minute. This
-blocks brute-forcing attempts:
+Finally, we can now configure access to the services running on this router,
+allowing all connections coming from localhost:
.. code-block:: none
- set firewall ipv4 input filter rule 40 action 'drop'
- set firewall ipv4 input filter rule 40 inbound-interface interface-name 'eth0'
- set firewall ipv4 input filter rule 40 destination port '22'
- set firewall ipv4 input filter rule 40 protocol 'tcp'
- set firewall ipv4 input filter rule 40 recent count '4'
- set firewall ipv4 input filter rule 40 recent time 'minute'
- set firewall ipv4 input filter rule 40 state new 'enable'
-
- set firewall ipv4 input filter rule 41 action 'accept'
- set firewall ipv4 input filter rule 41 destination port '22'
- set firewall ipv4 input filter rule 41 protocol 'tcp'
- set firewall ipv4 input filter rule 41 state new 'enable'
-
+ set firewall ipv4 input filter rule 50 action 'accept'
+ set firewall ipv4 input filter rule 50 source address 127.0.0.0/8
Commit changes, save the configuration, and exit configuration mode:
@@ -192,14 +334,13 @@ Commit changes, save the configuration, and exit configuration mode:
vyos@vyos# exit
vyos@vyos$
-
Hardening
#########
Especially if you are allowing SSH remote access from the outside/WAN
interface, there are a few additional configuration steps that should be taken.
-Replace the default `vyos` system user:
+Replace the default ``vyos`` system user:
.. code-block:: none
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 04:02:33 +0000