diff options
| -rw-r--r-- | docs/vpn/wireguard.rst | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/docs/vpn/wireguard.rst b/docs/vpn/wireguard.rst index e166a1e2..6348fb01 100644 --- a/docs/vpn/wireguard.rst +++ b/docs/vpn/wireguard.rst @@ -11,16 +11,15 @@ information. Configuration ============= -Wireguard requires the generation of a keypair, a private key which will decrypt +WireGuard requires the generation of a keypair, a private key which will decrypt incoming traffic and a public key, which the peer(s) will use to encrypt traffic. Generate keypair ---------------- Generate the keypair, which creates a public and private part and stores it -within VyOS. -It will be used per default on any configured wireguard interface, even if -multiple interfaces are being configured. +within VyOS. It will be used per default on any configured WireGuard interface, +even if multiple interfaces are being configured. .. code-block:: none @@ -40,7 +39,7 @@ Generate named keypair ---------------------- Named keypairs can be used on a interface basis, if configured. -If multiple wireguard interfaces are being configured, each can have +If multiple WireGuard interfaces are being configured, each can have their own keypairs. The commands below will generate 2 keypairs, which are not related @@ -65,7 +64,7 @@ firewall rules, since the port may be a different one when you reboot your system. You will also need the public key of your peer as well as the network(s) you -want to tunnel (allowed-ips) to configure a wireguard tunnel. The public key +want to tunnel (allowed-ips) to configure a WireGuard tunnel. The public key below is always the public key from your peer, not your local one. **local side** @@ -84,7 +83,7 @@ below is always the public key from your peer, not your local one. (FQDN). Using a FQDN will result in unexpected behavior. The last step is to define an interface route for 10.2.0.0/24 to get through -the wireguard interface `wg01`. Multiple IPs or networks can be defined and +the WireGuard interface `wg01`. Multiple IPs or networks can be defined and routed, the last check is allowed-ips which either prevents or allows the traffic. @@ -113,7 +112,7 @@ which needs to be shared with the peer. set protocols static interface-route 10.1.0.0/24 next-hop-interface wg01 Assure that your firewall rules allow the traffic, in which case you have a -working VPN using wireguard. +working VPN using WireGuard .. code-block:: none |