diff options
| -rw-r--r-- | docs/qos.rst | 20 |
1 files changed, 15 insertions, 5 deletions
diff --git a/docs/qos.rst b/docs/qos.rst index c0266461..0a58e3f8 100644 --- a/docs/qos.rst +++ b/docs/qos.rst @@ -1086,7 +1086,7 @@ parameters. Example ^^^^^^^ -A simple example of Shaper using priorities. +A simple example of Shaper using priorities. It includes examples of matching on addresses and protocols. .. code-block:: none @@ -1111,7 +1111,17 @@ A simple example of Shaper using priorities. set traffic-policy shaper MY-HTB default ceiling '100%' set traffic-policy shaper MY-HTB default priority '7' set traffic-policy shaper MY-HTB default queue-type 'fair-queue' - + set traffic-policy shaper MY-HTB class 2 match ack ip tcp ack + set traffic-policy shaper MY-HTB class 2 match dns ip destination port '53' + set traffic-policy shaper MY-HTB class 2 match icmp ip protocol 'icmp' + set traffic-policy shaper MY-HTB class 2 match ssh ip destination port '22' + set traffic-policy shaper MY-HTB class 2 match syn ip tcp syn + set traffic-policy shaper MY-HTB class 2 priority '5' + set traffic-policy shaper MY-HTB class 2 queue-limit '16' + set traffic-policy shaper MY-HTB class 2 queue-type 'fair-queue' + set traffic-policy shaper MY-HTB class 5 bandwidth '10%' + set traffic-policy shaper MY-HTB class 5 burst '15k' + set traffic-policy shaper MY-HTB class 5 ceiling '100%' .. _ingress-shaping: @@ -1153,7 +1163,7 @@ Once a traffic-policy is created, you can apply it to an interface: .. code-block:: none - set interfaces etherhet eth0 traffic-policy out WAN-OUT + set interfaces ethernet eth0 traffic-policy out WAN-OUT You can only apply one policy per interface and direction, but you can have several policies working at the same time: @@ -1161,8 +1171,8 @@ have several policies working at the same time: .. code-block:: none set interfaces ethernet eth0 traffic-policy in WAN-IN - set interfaces etherhet eth0 traffic-policy out WAN-OUT - set interfaces etherhet eth1 traffic-policy out WAN-OUT + set interfaces ethernet eth0 traffic-policy out WAN-OUT + set interfaces ethernet eth1 traffic-policy out WAN-OUT set interfaces ethernet eth2 traffic-policy out LAN-IN set interfaces ethernet eth2 traffic-policy out LAN-OUT |