diff options
| -rw-r--r-- | docs/configuration/vpn/l2tp.rst | 31 |
1 files changed, 14 insertions, 17 deletions
diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst index 0d8dde08..d331ce2c 100644 --- a/docs/configuration/vpn/l2tp.rst +++ b/docs/configuration/vpn/l2tp.rst @@ -72,12 +72,8 @@ parameter to the client. .. code-block:: none - set vpn l2tp remote-access dns-servers server-1 '8.8.8.8' - set vpn l2tp remote-access dns-servers server-2 '8.8.4.4' - -.. note:: Those are the `Google public DNS`_ servers, but you can choose - any public available servers, like Quad9_ (9.9.9.9), Cloudflare_ (1.1.1.1) - or OpenNIC_. + set vpn l2tp remote-access dns-servers server-1 '198.51.100.8' + set vpn l2tp remote-access dns-servers server-2 '198.51.100.4' Established sessions can be viewed using the **show vpn remote-access** operational command, or **show l2tp-server sessions** @@ -107,11 +103,11 @@ Below is an example to configure a LNS: set vpn l2tp remote-access authentication mode local set vpn l2tp remote-access authentication local-users username test password 'test' -The example above uses 192.0.2.2 as external IP address. A LAC normally -requires an authentication password, which is set in the example configuration -to ``lns shared-secret 'secret'``. This setup requires the Compression Control -Protocol (CCP) being disabled, the command ``set vpn l2tp remote-access ccp-disable`` -accomplishes that. +The example above uses 192.0.2.2 as external IP address. A LAC normally requires +an authentication password, which is set in the example configuration to +``lns shared-secret 'secret'``. This setup requires the Compression Control +Protocol (CCP) being disabled, the command ``set vpn l2tp remote-access +ccp-disable`` accomplishes that. Bandwidth Shaping @@ -166,9 +162,9 @@ servers can be setup and will be used subsequentially. RADIUS source address ^^^^^^^^^^^^^^^^^^^^^ -If you are using OSPF as IGP always the closets interface connected to the RADIUS -server is used. With VyOS 1.2 you can bind all outgoing RADIUS requests to a -single source IP e.g. the loopback interface. +If you are using OSPF as IGP always the closets interface connected to the +RADIUS server is used. With VyOS 1.2 you can bind all outgoing RADIUS requests +to a single source IP e.g. the loopback interface. .. code-block:: none @@ -183,14 +179,15 @@ on this NAS. RADIUS bandwidth shaping attribute ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -To enable bandwidth shaping via RADIUS, the option rate-limit needs to be enabled. +To enable bandwidth shaping via RADIUS, the option rate-limit needs to be +enabled. .. code-block:: none set vpn l2tp remote-access authentication radius rate-limit enable -The default RADIUS attribute for rate limiting is ``Filter-Id``, but you may also -redefine it. +The default RADIUS attribute for rate limiting is ``Filter-Id``, but you may +also redefine it. .. code-block:: none |