summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/services/lldp.rst103
1 files changed, 51 insertions, 52 deletions
diff --git a/docs/services/lldp.rst b/docs/services/lldp.rst
index da52adb0..4b1743e6 100644
--- a/docs/services/lldp.rst
+++ b/docs/services/lldp.rst
@@ -73,65 +73,64 @@ Operation
Displays information about all neighbors discovered via LLDP.
-.. code-block:: none
+ .. code-block:: none
- vyos@vyos:~# show lldp neighbors
- Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station
- D - Docsis, T - Telephone, O - Other
+ vyos@vyos:~$ show lldp neighbors
+ Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station
+ D - Docsis, T - Telephone, O - Other
- Device ID Local Proto Cap Platform Port ID
- --------- ----- ----- --- -------- -------
- Switch0815 eth0 LLDP B Cisco IOS Software, Gi0/4
+ Device ID Local Proto Cap Platform Port ID
+ --------- ----- ----- --- -------- -------
+ BR2.vyos.net eth0 LLDP R VyOS 1.2.4 eth1
+ BR3.vyos.net eth0 LLDP RB VyOS 1.2.4 eth2
+ SW1.vyos.net eth0 LLDP B Cisco IOS Software GigabitEthernet0/6
.. opcmd:: show lldp neighbors detail
Get detailed information about LLDP neighbors.
-.. code-block:: none
-
- vyos@vyos:~# show lldp neighbors detail
- -------------------------------------------------------------------------------
- LLDP neighbors:
- -------------------------------------------------------------------------------
- Interface: eth0, via: LLDP, RID: 1, Time: 12 days, xxxx:xxxx:40
- Chassis:
- ChassisID: mac 00:50:40:20:03:00
- SysName: Switch0815
- SysDescr: Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE11, RELEASE SOFTWARE (fc3)
- Technical Support: http://www.cisco.com/techsupport
- Copyright (c) 1986-2017 by Cisco Systems, Inc.
- Compiled Sat 19-Aug-17 09:34 by prod_rel_team
- MgmtIP: 192.0.2.201
- Capability: Bridge, on
- Port:
- PortID: ifname Gi0/4
- PortDescr: GigabitEthernet0/4
- TTL: 120
- PMD autoneg: supported: yes, enabled: yes
- Adv: 10Base-T, HD: yes, FD: yes
- Adv: 100Base-TX, HD: yes, FD: yes
- Adv: 1000Base-T, HD: no, FD: yes
- MAU oper type: 1000BaseTFD - Four-pair Category 5 UTP, full duplex mode
- VLAN: 1, pvid: yes
- LLDP-MED:
- Device Type: Network Connectivity Device
- Capability: Capabilities, yes
- Capability: Policy, yes
- Capability: Location, yes
- Capability: Inventory, yes
- LLDP-MED Network Policy for: Voice, Defined: no
- Priority: Best effort
- PCP: 0
- DSCP Value: 0
- LLDP-MED Network Policy for: Voice Signaling, Defined: no
- Priority: Best effort
- PCP: 0
- DSCP Value: 0
- Inventory:
- Hardware Revision: WS-C2960G-8TC-L (PowerPC405):C0
- Software Revision: 15.0(2)SE11
- Manufacturer: Cisco Systems, Inc.
- Model: WS-C2960G-8TC-L
+ .. code-block:: none
+
+ vyos@vyos:~$ show lldp neighbors detail
+ -------------------------------------------------------------------------------
+ LLDP neighbors:
+ -------------------------------------------------------------------------------
+ Interface: eth0, via: LLDP, RID: 28, Time: 0 day, 00:24:33
+ Chassis:
+ ChassisID: mac 00:53:00:01:02:c9
+ SysName: BR2.vyos.net
+ SysDescr: VyOS 1.3-rolling-201912230217
+ MgmtIP: 192.0.2.1
+ MgmtIP: 2001:db8::ffff
+ Capability: Bridge, on
+ Capability: Router, on
+ Capability: Wlan, off
+ Capability: Station, off
+ Port:
+ PortID: mac 00:53:00:01:02:c9
+ PortDescr: eth0
+ TTL: 120
+ PMD autoneg: supported: no, enabled: no
+ MAU oper type: 10GigBaseCX4 - X copper over 8 pair 100-Ohm balanced cable
+ VLAN: 201 eth0.201
+ VLAN: 205 eth0.205
+ LLDP-MED:
+ Device Type: Network Connectivity Device
+ Capability: Capabilities, yes
+ Capability: Policy, yes
+ Capability: Location, yes
+ Capability: MDI/PSE, yes
+ Capability: MDI/PD, yes
+ Capability: Inventory, yes
+ Inventory:
+ Hardware Revision: None
+ Software Revision: 4.19.89-amd64-vyos
+ Firmware Revision: 6.00
+ Serial Number: VMware-42 1d 83 b9 fe c1 bd b2-7
+ Manufacturer: VMware, Inc.
+ Model: VMware Virtual Platform
+ Asset ID: No Asset Tag
+ -------------------------------------------------------------------------------
.. opcmd:: show lldp neighbors interface <interface>