diff options
28 files changed, 88 insertions, 88 deletions
diff --git a/docs/configexamples/policy-based-ipsec-and-firewall.rst b/docs/configexamples/policy-based-ipsec-and-firewall.rst index 2337c1ac..8dc07de6 100644 --- a/docs/configexamples/policy-based-ipsec-and-firewall.rst +++ b/docs/configexamples/policy-based-ipsec-and-firewall.rst @@ -13,7 +13,7 @@ configuration is done only on one router. Network Topology and requirements ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -This configuration example and the requirments consists of: +This configuration example and the requirements consists of: - Two VyOS routers with public IP address. @@ -37,7 +37,7 @@ This configuration example and the requirments consists of: - Allow all new connections from local subnets. - - Allow connections from LANs to LANs throught the tunnel. + - Allow connections from LANs to LANs through the tunnel. .. image:: /_static/images/policy-based-ipsec-and-firewall.png diff --git a/docs/configexamples/wan-load-balancing.rst b/docs/configexamples/wan-load-balancing.rst index ace9a981..0952cfe5 100644 --- a/docs/configexamples/wan-load-balancing.rst +++ b/docs/configexamples/wan-load-balancing.rst @@ -69,7 +69,7 @@ Example 2: Failover based on interface weights This example uses the failover mode. -.. _wan:example2_overwiew: +.. _wan:example2_overview: Overview ^^^^^^^^ @@ -98,7 +98,7 @@ The previous example used the failover command to send traffic through eth1 if eth0 fails. In this example, failover functionality is provided by rule order. -.. _wan:example3_overwiew: +.. _wan:example3_overview: Overview ^^^^^^^^ @@ -129,7 +129,7 @@ traffic. It is assumed for this example that eth1 is connected to a slower connection than eth0 and should prioritize VoIP traffic. -.. _wan:example4_overwiew: +.. _wan:example4_overview: Overview ^^^^^^^^ diff --git a/docs/configexamples/zone-policy.rst b/docs/configexamples/zone-policy.rst index d9a6bf89..95648e7a 100644 --- a/docs/configexamples/zone-policy.rst +++ b/docs/configexamples/zone-policy.rst @@ -6,7 +6,7 @@ Zone-Policy example ------------------- .. note:: Starting from VyOS 1.4-rolling-202308040557, a new firewall - structure can be found on all vyos instalations, and zone based firewall is + structure can be found on all vyos installations, and zone based firewall is no longer supported. Documentation for most of the new firewall CLI can be found in the `firewall <https://docs.vyos.io/en/latest/configuration/firewall/general.html>`_ diff --git a/docs/configuration/container/index.rst b/docs/configuration/container/index.rst index 988b425b..e5a470bc 100644 --- a/docs/configuration/container/index.rst +++ b/docs/configuration/container/index.rst @@ -125,7 +125,7 @@ Configuration - **net-bind-service**: Bind a socket to privileged ports (port numbers less than 1024) - **net-raw**: Permission to create raw network sockets - **setpcap**: Capability sets (from bounded or inherited set) - - **sys-admin**: Administation operations (quotactl, mount, sethostname, setdomainame) + - **sys-admin**: Administration operations (quotactl, mount, sethostname, setdomainame) - **sys-time**: Permission to set system clock .. cfgcmd:: set container name <name> disable diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst index bba9e56f..f84fd456 100644 --- a/docs/configuration/firewall/bridge.rst +++ b/docs/configuration/firewall/bridge.rst @@ -13,7 +13,7 @@ Overview ******** In this section there's useful information of all firewall configuration that -can be done regarding bridge, and appropiate op-mode commands. +can be done regarding bridge, and appropriate op-mode commands. Configuration commands covered in this section: .. cfgcmd:: set firewall bridge ... @@ -37,13 +37,13 @@ for this layer is shown next: .. figure:: /_static/images/firewall-bridge-packet-flow.png -For traffic that needs to be forwared internally by the bridge, base chain is +For traffic that needs to be forwarded internally by the bridge, base chain is is **forward**, and it's base command for filtering is ``set firewall bridge -forward filter ...``, which happens in stage 4, highlightened with red color. +forward filter ...``, which happens in stage 4, highlighted with red color. Custom bridge firewall chains can be create with command ``set firewall bridge name <name> ...``. In order to use such custom chain, a rule with action jump, -and the appropiate target should be defined in a base chain. +and the appropriate target should be defined in a base chain. .. note:: **Layer 3 bridge**: When an IP address is assigned to the bridge interface, and if traffic @@ -137,7 +137,7 @@ not match any rule in it's chain. For base chains, possible options for .. cfgcmd:: set firewall bridge name <name> default-jump-target <text> - To be used only when ``defult-action`` is set to ``jump``. Use this + To be used only when ``default-action`` is set to ``jump``. Use this command to specify jump target for default rule. .. note:: **Important note about default-actions:** @@ -236,9 +236,9 @@ There are a lot of matching criteria against which the packet can be tested. .. cfgcmd:: set firewall bridge name <name> rule <1-999999> inbound-interface name <iface> - Match based on inbound interface. Wilcard ``*`` can be used. + Match based on inbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall bridge forward filter rule <1-999999> inbound-interface group <iface_group> @@ -246,16 +246,16 @@ There are a lot of matching criteria against which the packet can be tested. inbound-interface group <iface_group> Match based on inbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall bridge forward filter rule <1-999999> outbound-interface name <iface> .. cfgcmd:: set firewall bridge name <name> rule <1-999999> outbound-interface name <iface> - Match based on outbound interface. Wilcard ``*`` can be used. + Match based on outbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall bridge forward filter rule <1-999999> outbound-interface group <iface_group> @@ -263,7 +263,7 @@ There are a lot of matching criteria against which the packet can be tested. outbound-interface group <iface_group> Match based on outbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall bridge forward filter rule <1-999999> vlan id <0-4096> @@ -288,7 +288,7 @@ Rule-set overview In this section you can find all useful firewall op-mode commands. -General commands for firewall configuration, counter and statiscits: +General commands for firewall configuration, counter and statistics: .. opcmd:: show firewall .. opcmd:: show firewall summary diff --git a/docs/configuration/firewall/flowtables.rst b/docs/configuration/firewall/flowtables.rst index bc7b9212..ffd791f9 100644 --- a/docs/configuration/firewall/flowtables.rst +++ b/docs/configuration/firewall/flowtables.rst @@ -99,20 +99,20 @@ Creating rules for using flow tables: Configuration Example ********************* -Things to be considred in this setup: +Things to be considered in this setup: * Two interfaces are going to be used in the flowtables: eth0 and eth1 - * Minumum firewall ruleset is provided, which includes some filtering rules, - and appropiate rules for using flowtable offload capabilities. + * Minimum firewall ruleset is provided, which includes some filtering rules, + and appropriate rules for using flowtable offload capabilities. As described, first packet will be evaluated by all the firewall path, so -desired connection should be explicitely accepted. Same thing should be taken +desired connection should be explicitly accepted. Same thing should be taken into account for traffic in reverse order. In most cases state policies are used in order to accept connection in reverse patch. -We will only accept traffic comming from interface eth0, protocol tcp and -destination port 1122. All other traffic traspassing the router should be +We will only accept traffic coming from interface eth0, protocol tcp and +destination port 1122. All other traffic trespassing the router should be blocked. Commands diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index 44e0cd20..1d904901 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -24,7 +24,7 @@ firewall are covered below: where the packet was received is part of a bridge, or not. If the interface where the packet was received isn't part of a bridge, then -packetis processed at the **IP Layer**: +packet is processed at the **IP Layer**: * **Prerouting**: several actions can be done in this stage, and currently these actions are defined in different parts in VyOS configuration. Order @@ -65,7 +65,7 @@ packetis processed at the **IP Layer**: * **Output**: stage where traffic that originates from the router itself can be filtered and controlled. Bear in mind that this traffic can be a new connection originated by a internal process running on VyOS router, - such as NTP, or a response to traffic received externaly through + such as NTP, or a response to traffic received externally through **input** (for example response to an ssh login attempt to the router). This includes ipv4 and ipv6 filtering rules, defined in: @@ -84,7 +84,7 @@ If the interface where the packet was received is part of a bridge, then the packet is processed at the **Bridge Layer**, which contains a basic setup for bridge filtering: - * **Forward (Bridge)**: stage where traffic that is trespasing through the + * **Forward (Bridge)**: stage where traffic that is trespassing through the bridge is filtered and controlled: * ``set firewall bridge forward filter ...``. diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst index 1cf50810..a9459f00 100644 --- a/docs/configuration/firewall/ipv4.rst +++ b/docs/configuration/firewall/ipv4.rst @@ -11,7 +11,7 @@ Overview ******** In this section there's useful information of all firewall configuration that -can be done regarding IPv4, and appropiate op-mode commands. +can be done regarding IPv4, and appropriate op-mode commands. Configuration commands covered in this section: .. cfgcmd:: set firewall ipv4 ... @@ -41,12 +41,12 @@ next: Where firewall base chain to configure firewall filtering rules for transit traffic is ``set firewall ipv4 forward filter ...``, which happens in stage 5, -highlightened with red color. +highlighted with red color. For traffic towards the router itself, base chain is **input**, while traffic originated by the router, base chain is **output**. A new simplified packet flow diagram is shown next, which shows the path -for traffic destinated to the router itself, and traffic generated by the +for traffic destined to the router itself, and traffic generated by the router (starting from circle number 6): .. figure:: /_static/images/firewall-input-packet-flow.png @@ -64,7 +64,7 @@ output filter ...`` Custom firewall chains can be created, with commands ``set firewall ipv4 name <name> ...``. In order to use -such custom chain, a rule with **action jump**, and the appropiate **target** +such custom chain, a rule with **action jump**, and the appropriate **target** should be defined in a base chain. ********************* @@ -184,7 +184,7 @@ not match any rule in it's chain. For base chains, possible options for .. cfgcmd:: set firewall ipv4 name <name> default-jump-target <text> - To be used only when ``defult-action`` is set to ``jump``. Use this + To be used only when ``default-action`` is set to ``jump``. Use this command to specify jump target for default rule. .. note:: **Important note about default-actions:** @@ -683,9 +683,9 @@ geoip) to keep database and rules updated. .. cfgcmd:: set firewall ipv4 name <name> rule <1-999999> inbound-interface name <iface> - Match based on inbound interface. Wilcard ``*`` can be used. + Match based on inbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> inbound-interface group <iface_group> @@ -695,7 +695,7 @@ geoip) to keep database and rules updated. inbound-interface group <iface_group> Match based on inbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> outbound-interface name <iface> @@ -704,9 +704,9 @@ geoip) to keep database and rules updated. .. cfgcmd:: set firewall ipv4 name <name> rule <1-999999> outbound-interface name <iface> - Match based on outbound interface. Wilcard ``*`` can be used. + Match based on outbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> outbound-interface group <iface_group> @@ -716,7 +716,7 @@ geoip) to keep database and rules updated. outbound-interface group <iface_group> Match based on outbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> ipsec [match-ipsec | match-none] diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst index c679ffd5..4b695f74 100644 --- a/docs/configuration/firewall/ipv6.rst +++ b/docs/configuration/firewall/ipv6.rst @@ -11,7 +11,7 @@ Overview ******** In this section there's useful information of all firewall configuration that -can be done regarding IPv6, and appropiate op-mode commands. +can be done regarding IPv6, and appropriate op-mode commands. Configuration commands covered in this section: .. cfgcmd:: set firewall ipv6 ... @@ -41,12 +41,12 @@ next: Where firewall base chain to configure firewall filtering rules for transit traffic is ``set firewall ipv6 forward filter ...``, which happens in stage 5, -highlightened with red color. +highlighted with red color. For traffic towards the router itself, base chain is **input**, while traffic originated by the router, base chain is **output**. A new simplified packet flow diagram is shown next, which shows the path -for traffic destinated to the router itself, and traffic generated by the +for traffic destined to the router itself, and traffic generated by the router (starting from circle number 6): .. figure:: /_static/images/firewall-input-packet-flow.png @@ -64,7 +64,7 @@ output filter ...`` Custom firewall chains can be created, with commands ``set firewall ipv6 name <name> ...``. In order to use -such custom chain, a rule with **action jump**, and the appropiate **target** +such custom chain, a rule with **action jump**, and the appropriate **target** should be defined in a base chain. ****************************** @@ -184,7 +184,7 @@ not match any rule in it's chain. For base chains, possible options for .. cfgcmd:: set firewall ipv6 name <name> default-jump-target <text> - To be used only when ``defult-action`` is set to ``jump``. Use this + To be used only when ``default-action`` is set to ``jump``. Use this command to specify jump target for default rule. .. note:: **Important note about default-actions:** @@ -670,9 +670,9 @@ geoip) to keep database and rules updated. .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> inbound-interface name <iface> - Match based on inbound interface. Wilcard ``*`` can be used. + Match based on inbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> inbound-interface group <iface_group> @@ -682,7 +682,7 @@ geoip) to keep database and rules updated. inbound-interface group <iface_group> Match based on inbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> outbound-interface name <iface> @@ -691,9 +691,9 @@ geoip) to keep database and rules updated. .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> outbound-interface name <iface> - Match based on outbound interface. Wilcard ``*`` can be used. + Match based on outbound interface. Wildcard ``*`` can be used. For example: ``eth2*``. Prepending character ``!`` for inverted matching - criteria is also supportd. For example ``!eth2`` + criteria is also supported. For example ``!eth2`` .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> outbound-interface group <iface_group> @@ -703,7 +703,7 @@ geoip) to keep database and rules updated. outbound-interface group <iface_group> Match based on outbound interface group. Prepending character ``!`` for - inverted matching criteria is also supportd. For example ``!IFACE_GROUP`` + inverted matching criteria is also supported. For example ``!IFACE_GROUP`` .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> ipsec [match-ipsec | match-none] diff --git a/docs/configuration/firewall/zone.rst b/docs/configuration/firewall/zone.rst index 059b029d..f71ad8c1 100644 --- a/docs/configuration/firewall/zone.rst +++ b/docs/configuration/firewall/zone.rst @@ -11,7 +11,7 @@ Overview ******** .. note:: Starting from VyOS 1.4-rolling-202308040557, a new firewall - structure can be found on all vyos instalations. Zone based firewall was + structure can be found on all VyOS installations. Zone based firewall was removed in that version, but re introduced in VyOS 1.4 and 1.5. All versions built after 2023-10-22 has this feature. Documentation for most of the new firewall CLI can be diff --git a/docs/configuration/pki/index.rst b/docs/configuration/pki/index.rst index 450b72b0..0ead198f 100644 --- a/docs/configuration/pki/index.rst +++ b/docs/configuration/pki/index.rst @@ -8,7 +8,7 @@ PKI ### -VyOS 1.4 changed the way in how encrytion keys or certificates are stored on the +VyOS 1.4 changed the way in how encryption keys or certificates are stored on the system. In the pre VyOS 1.4 era, certificates got stored under /config and every service referenced a file. That made copying a running configuration from system A to system B a bit harder, as you had to copy the files and their permissions @@ -120,12 +120,12 @@ OpenVPN .. opcmd:: generate pki openvpn shared-secret - Genearate a new OpenVPN shared secret. The generated secret is the output to + Generate a new OpenVPN shared secret. The generated secret is the output to the console. .. opcmd:: generate pki openvpn shared-secret install <name> - Genearate a new OpenVPN shared secret. The generated secret is the output to + Generate a new OpenVPN shared secret. The generated secret is the output to the console. .. include:: pki_cli_import_help.txt @@ -163,7 +163,7 @@ WireGuard the output from op-mode into configuration mode. ``peer`` is used for the VyOS CLI command to identify the WireGuard peer where - this secred is to be used. + this secret is to be used. Key usage (CLI) =============== diff --git a/docs/configuration/protocols/isis.rst b/docs/configuration/protocols/isis.rst index 1f779d0a..9b954965 100644 --- a/docs/configuration/protocols/isis.rst +++ b/docs/configuration/protocols/isis.rst @@ -12,7 +12,7 @@ interior gateway protocol (IGP) which is described in ISO10589, algorithm to create a database of the network’s topology, and from that database to determine the best (that is, lowest cost) path to a destination. The intermediate systems (the name for routers) exchange topology -information with their directly conencted neighbors. IS-IS runs directly on +information with their directly connected neighbors. IS-IS runs directly on the data link layer (Layer 2). IS-IS addresses are called :abbr:`NETs (Network Entity Titles)` and can be 8 to 20 bytes long, but are generally 10 bytes long. The tree database that is created with IS-IS is @@ -39,7 +39,7 @@ occur within IS-IS when it comes to said duplication. .. cfgcmd:: set protocols isis net <network-entity-title> - This commad sets network entity title (NET) provided in ISO format. + This command sets network entity title (NET) provided in ISO format. Here is an example :abbr:`NET (Network Entity Title)` value: @@ -52,9 +52,9 @@ occur within IS-IS when it comes to said duplication. * :abbr:`AFI (Address family authority identifier)` - ``49`` The AFI value 49 is what IS-IS uses for private addressing. - * Area identifier: ``0001`` IS-IS area number (numberical area ``1``) + * Area identifier: ``0001`` IS-IS area number (numerical area ``1``) - * System identifier: ``1921.6800.1002`` - for system idetifiers we recommend + * System identifier: ``1921.6800.1002`` - for system identifiers we recommend to use IP address or MAC address of the router itself. The way to construct this is to keep all of the zeroes of the router IP address, and then change the periods from being every three numbers to every four numbers. The diff --git a/docs/configuration/service/broadcast-relay.rst b/docs/configuration/service/broadcast-relay.rst index b6e2bed7..f64bb208 100644 --- a/docs/configuration/service/broadcast-relay.rst +++ b/docs/configuration/service/broadcast-relay.rst @@ -20,7 +20,7 @@ Configuration .. cfgcmd:: set service broadcast-relay id <n> description <description> A description can be added for each and every unique relay ID. This is - useful to distinguish between multiple different ports/appliactions. + useful to distinguish between multiple different ports/applications. .. cfgcmd:: set service broadcast-relay id <n> interface <interface> @@ -35,7 +35,7 @@ Configuration .. cfgcmd:: set service broadcast-relay id <n> port <port> - The UDP port number used by your apllication. It is mandatory for this kind + The UDP port number used by your application. It is mandatory for this kind of operation. .. cfgcmd:: set service broadcast-relay id <n> disable diff --git a/docs/configuration/service/conntrack-sync.rst b/docs/configuration/service/conntrack-sync.rst index db23c92f..232db1a8 100644 --- a/docs/configuration/service/conntrack-sync.rst +++ b/docs/configuration/service/conntrack-sync.rst @@ -29,7 +29,7 @@ will be mandatorily defragmented. It is possible to use either Multicast or Unicast to sync conntrack traffic. Most examples below show Multicast, but unicast can be specified by using the -"peer" keywork after the specificed interface, as in the following example: +"peer" keywork after the specified interface, as in the following example: :cfgcmd:`set service conntrack-sync interface eth0 peer 192.168.0.250` @@ -204,7 +204,7 @@ Now configure conntrack-sync service on ``router1`` **and** ``router2`` .. code-block:: none - set high-availablilty vrrp group internal virtual-address ... etc ... + set high-availability vrrp group internal virtual-address ... etc ... set high-availability vrrp sync-group syncgrp member 'internal' set service conntrack-sync accept-protocol 'tcp' set service conntrack-sync accept-protocol 'udp' diff --git a/docs/configuration/service/ids.rst b/docs/configuration/service/ids.rst index 3e508d50..8a64467f 100644 --- a/docs/configuration/service/ids.rst +++ b/docs/configuration/service/ids.rst @@ -33,7 +33,7 @@ Configuration Configure direction for processing traffic. .. cfgcmd:: set service ids ddos-protection exclude-network <x.x.x.x/x> -.. cfgcmd:: set service ids ddos-protection exlude-network <h:h:h:h:h:h:h:h/x> +.. cfgcmd:: set service ids ddos-protection exclude-network <h:h:h:h:h:h:h:h/x> Specify IPv4 and/or IPv6 networks which are going to be excluded. @@ -56,7 +56,7 @@ Configuration .. cfgcmd:: set service ids ddos-protection sflow port <1-65535> - Configure port number to be used for sflow conection. Default port is 6343. + Configure port number to be used for sflow connection. Default port is 6343. .. cfgcmd:: set service ids ddos-protection threshold general [fps | mbps | pps] <0-4294967294> @@ -96,7 +96,7 @@ In this simplified scenario, main things to be considered are: * Interface **eth0** used to connect to upstream. Since we are analyzing attacks to and from our internal network, two types -of attacks can be identified, and differents actions are needed: +of attacks can be identified, and different actions are needed: * External attack: an attack from the internet towards an internal IP is identify. In this case, all connections towards such IP will be diff --git a/docs/configuration/service/router-advert.rst b/docs/configuration/service/router-advert.rst index ca558b6a..8f984b10 100644 --- a/docs/configuration/service/router-advert.rst +++ b/docs/configuration/service/router-advert.rst @@ -38,7 +38,7 @@ Configuration "Cur Hop Limit", "hop-limit", "Hop count field of the outgoing RA packets" """Managed address configuration"" flag", "managed-flag", "Tell hosts to use the administered stateful protocol (i.e. DHCP) for autoconfiguration" """Other configuration"" flag", "other-config-flag", "Tell hosts to use the administered (stateful) protocol (i.e. DHCP) for autoconfiguration of other (non-address) information" - "MTU","link-mtu","Link MTU value placed in RAs, exluded in RAs if unset" + "MTU","link-mtu","Link MTU value placed in RAs, excluded in RAs if unset" "Router Lifetime","default-lifetime","Lifetime associated with the default router in units of seconds" "Reachable Time","reachable-time","Time, in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation" "Retransmit Timer","retrans-timer","Time in milliseconds between retransmitted Neighbor Solicitation messages" diff --git a/docs/configuration/service/salt-minion.rst b/docs/configuration/service/salt-minion.rst index aa747c36..8638246b 100644 --- a/docs/configuration/service/salt-minion.rst +++ b/docs/configuration/service/salt-minion.rst @@ -17,7 +17,7 @@ Requirements ************ To use the Salt-Minion, a running Salt-Master is required. You can find more -in the `Salt Poject Documentaion +in the `Salt Project Documentation <https://docs.saltproject.io/en/latest/contents.html>`_ ************* diff --git a/docs/configuration/system/conntrack.rst b/docs/configuration/system/conntrack.rst index 6ed5fef7..1401e02e 100644 --- a/docs/configuration/system/conntrack.rst +++ b/docs/configuration/system/conntrack.rst @@ -94,7 +94,7 @@ states. .. cfgcmd:: set system conntrack timeout udp stream <1-21474836> :defaultvalue: - Set the timeout in secounds for a protocol or state. + Set the timeout in seconds for a protocol or state. You can also define custom timeout values to apply to a specific subset of connections, based on a packet and flow selector. To do this, you need to @@ -172,7 +172,7 @@ create a rule defining the packet and flow selector. .. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> protocol udp unreplied <1-21474836> - Set the timeout in secounds for a protocol or state in a custom rule. + Set the timeout in seconds for a protocol or state in a custom rule. Conntrack ignore rules ====================== diff --git a/docs/configuration/system/flow-accounting.rst b/docs/configuration/system/flow-accounting.rst index 8d46b178..30d6fc4d 100644 --- a/docs/configuration/system/flow-accounting.rst +++ b/docs/configuration/system/flow-accounting.rst @@ -50,7 +50,7 @@ interface, the interface must be configured for flow accounting. Configure and enable collection of flow information for the interface identified by `<interface>`. - You can configure multiple interfaces which whould participate in flow + You can configure multiple interfaces which would participate in flow accounting. .. note:: Will be recorded only packets/flows on **incoming** direction in diff --git a/docs/configuration/system/ip.rst b/docs/configuration/system/ip.rst index 279630e2..a422388f 100644 --- a/docs/configuration/system/ip.rst +++ b/docs/configuration/system/ip.rst @@ -30,7 +30,7 @@ System configuration commands Zebra/Kernel route filtering ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Zebra supports prefix-lists and Route Mapss to match routes received from +Zebra supports prefix-lists and Route Maps to match routes received from other FRR components. The permit/deny facilities provided by these commands can be used to filter which routes zebra will install in the kernel. @@ -48,7 +48,7 @@ Nexthop Tracking Nexthop tracking resolve nexthops via the default route by default. This is enabled by default for a traditional profile of FRR which we use. It and can be disabled if -you do not wan't to e.g. allow BGP to peer across the default route. +you do not want to e.g. allow BGP to peer across the default route. .. cfgcmd:: set system ip nht no-resolve-via-default diff --git a/docs/configuration/system/ipv6.rst b/docs/configuration/system/ipv6.rst index d8d3c4c9..cde7a2aa 100644 --- a/docs/configuration/system/ipv6.rst +++ b/docs/configuration/system/ipv6.rst @@ -26,7 +26,7 @@ System configuration commands Zebra/Kernel route filtering ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Zebra supports prefix-lists and Route Mapss to match routes received from +Zebra supports prefix-lists and Route Maps to match routes received from other FRR components. The permit/deny facilities provided by these commands can be used to filter which routes zebra will install in the kernel. @@ -44,7 +44,7 @@ Nexthop Tracking Nexthop tracking resolve nexthops via the default route by default. This is enabled by default for a traditional profile of FRR which we use. It and can be disabled if -you do not wan't to e.g. allow BGP to peer across the default route. +you do not want to e.g. allow BGP to peer across the default route. .. cfgcmd:: set system ipv6 nht no-resolve-via-default diff --git a/docs/configuration/system/option.rst b/docs/configuration/system/option.rst index 02c889dd..44c66186 100644 --- a/docs/configuration/system/option.rst +++ b/docs/configuration/system/option.rst @@ -88,7 +88,7 @@ Keyboard Layout *************** When starting a VyOS live system (the installation CD) the configured keyboard -layout defaults to US. As this might not suite everyones use case you can adjust +layout defaults to US. As this might not suite everyone's use case you can adjust the used keyboard layout on the system console. .. cfgcmd:: set system option keyboard-layout <us | fr | de | fi | no | dk> diff --git a/docs/configuration/system/sflow.rst b/docs/configuration/system/sflow.rst index c2cf5a80..0c8bf03b 100644 --- a/docs/configuration/system/sflow.rst +++ b/docs/configuration/system/sflow.rst @@ -29,7 +29,7 @@ Configuration Configure and enable collection of flow information for the interface identified by <interface>. - You can configure multiple interfaces which whould participate in sflow accounting. + You can configure multiple interfaces which would participate in sflow accounting. .. cfgcmd:: set system sflow polling <sec> diff --git a/docs/configuration/system/syslog.rst b/docs/configuration/system/syslog.rst index 8755d905..cc7ac676 100644 --- a/docs/configuration/system/syslog.rst +++ b/docs/configuration/system/syslog.rst @@ -45,7 +45,7 @@ Custom File .. cfgcmd:: set system syslog file <filename> archive file <number> - Syslog uses logrotate to rotate logiles after a number of gives bytes. + Syslog uses logrotate to rotate logfiles after a number of gives bytes. We keep as many as `<number>` rotated file before they are deleted on the system. @@ -200,7 +200,7 @@ Display Logs .. opcmd:: show log [all | authorization | cluster | conntrack-sync | ...] Display log files of given category on the console. Use tab completion to get - a list of available categories. Thos categories could be: all, authorization, + a list of available categories. Those categories could be: all, authorization, cluster, conntrack-sync, dhcp, directory, dns, file, firewall, https, image lldp, nat, openvpn, snmp, tail, vpn, vrrp diff --git a/docs/configuration/system/task-scheduler.rst b/docs/configuration/system/task-scheduler.rst index 382da39f..4a754ba3 100644 --- a/docs/configuration/system/task-scheduler.rst +++ b/docs/configuration/system/task-scheduler.rst @@ -7,7 +7,7 @@ Task Scheduler The task scheduler allows you to execute tasks on a given schedule. It makes use of UNIX cron_. -.. note:: All scripts excecuted this way are executed as root user - this may +.. note:: All scripts executed this way are executed as root user - this may be dangerous. Together with :ref:`command-scripting` this can be used for automating (re-)configuration. diff --git a/docs/configuration/trafficpolicy/index.rst b/docs/configuration/trafficpolicy/index.rst index ed63b21f..f99c2a66 100644 --- a/docs/configuration/trafficpolicy/index.rst +++ b/docs/configuration/trafficpolicy/index.rst @@ -368,7 +368,7 @@ are to be sent, they could get dropped when trying to get enqueued at the tail. This can happen if the queue has still not been able to release enough packets from its head. -This is the policy that requieres the lowest resources for the same +This is the policy that requires the lowest resources for the same amount of traffic. But **very likely you do not need it as you cannot get much from it. Sometimes it is used just to enable logging.** @@ -504,7 +504,7 @@ and increase `interval` to something around 150 ms. the number of sub-queues (default: 1024) into which packets are classified. -.. cfgcmd:: set qos policy fq-codel <policy name> interval <miliseconds> +.. cfgcmd:: set qos policy fq-codel <policy name> interval <milliseconds> Use this command to configure an fq-codel policy, set its name and the time period used by the control loop of CoDel to detect when a @@ -518,7 +518,7 @@ and increase `interval` to something around 150 ms. define a hard limit on the real queue size. When this limit is reached, new packets are dropped (default: 10240 packets). -.. cfgcmd:: set qos policy fq-codel <policy-name> target <miliseconds> +.. cfgcmd:: set qos policy fq-codel <policy-name> target <milliseconds> Use this command to configure an fq-codel policy, set its name, and define the acceptable minimum standing/persistent queue delay. This @@ -710,7 +710,7 @@ continuously, packets from lower priority classes will only be transmitted after traffic volume from higher priority classes decreases. -.. note:: In Priority Queue we do not define clases with a meaningless +.. note:: In Priority Queue we do not define classes with a meaningless class ID number but with a class priority number (1-7). The lower the number, the higher the priority. @@ -912,7 +912,7 @@ In principle, values must be Rate Control ------------ -| **Queueing discipline:** Tocken Bucket Filter. +| **Queueing discipline:** Token Bucket Filter. | **Applies to:** Outbound traffic. Rate-Control is a classless policy that limits the packet flow to a set diff --git a/docs/configuration/vrf/index.rst b/docs/configuration/vrf/index.rst index 67eba886..0d6b895f 100644 --- a/docs/configuration/vrf/index.rst +++ b/docs/configuration/vrf/index.rst @@ -43,7 +43,7 @@ then enslaved to a VRF device. Zebra/Kernel route filtering ---------------------------- -Zebra supports prefix-lists and Route Mapss to match routes received from +Zebra supports prefix-lists and Route Maps to match routes received from other FRR components. The permit/deny facilities provided by these commands can be used to filter which routes zebra will install in the kernel. @@ -72,7 +72,7 @@ Nexthop Tracking Nexthop tracking resolve nexthops via the default route by default. This is enabled by default for a traditional profile of FRR which we use. It and can be disabled if -you do not wan't to e.g. allow BGP to peer across the default route. +you do not want to e.g. allow BGP to peer across the default route. .. cfgcmd:: set vrf name <name> ip nht no-resolve-via-default diff --git a/docs/operation/raid.rst b/docs/operation/raid.rst index 30407718..642a7332 100644 --- a/docs/operation/raid.rst +++ b/docs/operation/raid.rst @@ -24,7 +24,7 @@ The VyOS implementation of RAID 1 allows the following: * The ability to replace a failed disk and initiate re-mirroring * The ability to monitor the status of remirroring -.. _raid_instalation: +.. _raid_installation: Installation Implications ========================= |