1 files changed, 111 insertions, 0 deletions
diff --git a/docs/_include/interface-vlan-8021q.txt b/docs/_include/interface-vlan-8021q.txt
new file mode 100644
index 00000000..2c7e58f7
--- /dev/null
+++ b/docs/_include/interface-vlan-8021q.txt
@@ -0,0 +1,111 @@
+IEEE 802.1q_, often referred to as Dot1q, is the networking standard that supports
+virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The standard defines a
+system of VLAN tagging for Ethernet frames and the accompanying procedures to be
+used by bridges and switches in handling such frames. The standard also contains
+provisions for a quality-of-service prioritization scheme commonly known as IEEE
+802.1p and defines the Generic Attribute Registration Protocol.
+
+Portions of the network which are VLAN-aware (i.e., IEEE 802.1q_ conformant) can
+include VLAN tags. When a frame enters the VLAN-aware portion of the network, a
+tag is added to represent the VLAN membership. Each frame must be distinguishable
+as being within exactly one VLAN. A frame in the VLAN-aware portion of the network
+that does not contain a VLAN tag is assumed to be flowing on the native VLAN.
+
+The standard was developed by IEEE 802.1, a working group of the IEEE 802
+standards committee, and continues to be actively revised. One of the notable
+revisions is 802.1Q-2014 which incorporated IEEE 802.1aq (Shortest Path Bridging)
+and much of the IEEE 802.1d standard.
+
+802.1q VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
+term used for this is ``vif``.
+
+.. cfgcmd:: set interfaces {{ var0 }} <interface> vif <vlan-id>
+
+  Create a new VLAN interface on interface `<interface>` using the VLAN number
+  provided via `<vlan-id>`.
+
+  You can create multiple VLAN interfaces on a physical interface. The VLAN ID
+  range is from 0 to 4094.
+
+  .. note:: Only 802.1Q-tagged packets are accepted on Ethernet vifs.
+
+.. cmdinclude:: ../_include/interface-address-with-dhcp.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-description.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-disable.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-disable-link-detect.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-mac.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-mtu.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-ipv6-addr-autoconf.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-ipv6-addr-eui64.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-vrf.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+**DHCP(v6)**
+
+.. cmdinclude:: ../_include/interface-dhcp-options.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-dhcpv6-options.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. include:: ../common-references.rst
+\ No newline at end of file