5 files changed, 46 insertions, 28 deletions
diff --git a/docs/_include/common-references.txt b/docs/_include/common-references.txt
index 79881972..de4f76e7 100644
--- a/docs/_include/common-references.txt
+++ b/docs/_include/common-references.txt
@@ -1,6 +1,9 @@
+.. stop_vyoslinter
+
 .. _`accel-ppp`: https://accel-ppp.org/
 .. _`Secure Socket Tunneling Protocol`: https://en.wikipedia.org/wiki/Secure_Socket_Tunneling_Protocol
 .. _Phabricator: https://phabricator.vyos.net/
-
 .. _802.1ad: https://en.wikipedia.org/wiki/IEEE_802.1ad
 .. _802.1q: https://en.wikipedia.org/wiki/IEEE_802.1Q
+
+.. start_vyoslinter
+\ No newline at end of file
diff --git a/docs/_include/interface-dhcpv6-prefix-delegation.txt b/docs/_include/interface-dhcpv6-prefix-delegation.txt
index 6a001949..1ef94c14 100644
--- a/docs/_include/interface-dhcpv6-prefix-delegation.txt
+++ b/docs/_include/interface-dhcpv6-prefix-delegation.txt
@@ -1,7 +1,8 @@
 **DHCPv6 Prefix Delegation (PD)**
 
 VyOS 1.3 (equuleus) supports DHCPv6-PD (:rfc:`3633`). DHCPv6 Prefix Delegation
-is supported by most ISPs who provide native IPv6 for consumers on fixed networks.
+is supported by most ISPs who provide native IPv6 for consumers on fixed
+networks.
 
 .. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
   {{ var5 }} {{ var6 }} dhcpv6-options pd <id> length <length>
@@ -20,7 +21,8 @@ is supported by most ISPs who provide native IPv6 for consumers on fixed network
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} dhcpv6-options pd 0 length 56
 
 .. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
-  {{ var5 }} {{ var6 }} dhcpv6-options pd <id> interface <delegatee> address <address>
+  {{ var5 }} {{ var6 }} dhcpv6-options pd <id> interface <delegatee>
+  address <address>
 
   Specify the interface address used locally on the interfcae where the prefix
   has been delegated to. ID must be a decimal integer.
@@ -29,10 +31,15 @@ is supported by most ISPs who provide native IPv6 for consumers on fixed network
   complete interface address. The default is to use the EUI-64 address of the
   interface.
 
+  .. stop_vyoslinter
+
   Example: Delegate a /64 prefix to interface eth8 which will use a local
   address on this router of ``<prefix>::ffff``, as the address 65534 will
   correspond to ``ffff`` in hexadecimal notation.
 
+  .. start_vyoslinter
+
+
   .. code-block:: none
 
     set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} dhcpv6-options pd 0 interface eth8 address 65534
diff --git a/docs/_include/interface-disable-flow-control.txt b/docs/_include/interface-disable-flow-control.txt
index 2b319b22..347f1145 100644
--- a/docs/_include/interface-disable-flow-control.txt
+++ b/docs/_include/interface-disable-flow-control.txt
@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} disable-flow-control
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+   disable-flow-control
 
   Ethernet flow control is a mechanism for temporarily stopping the transmission
   of data on Ethernet family computer networks. The goal of this mechanism is to
@@ -8,9 +9,9 @@
   802.3x standard.
 
   A sending station (computer or network switch) may be transmitting data faster
-  than the other end of the link can accept it. Using flow control, the receiving
-  station can signal the sender requesting suspension of transmissions until the
-  receiver catches up.
+  than the other end of the link can accept it. Using flow control, the
+  receiving station can signal the sender requesting suspension of
+  transmissions until the receiver catches up.
 
   Use this command to disable the generation of Ethernet flow control (pause
   frames).
diff --git a/docs/_include/interface-mirror.txt b/docs/_include/interface-mirror.txt
index 8cdbf77d..a3d12220 100644
--- a/docs/_include/interface-mirror.txt
+++ b/docs/_include/interface-mirror.txt
@@ -1,17 +1,22 @@
-SPAN port mirroring can copy the inbound/outbound traffic of the interface to the 
-specified interface, usually the interface can be connected to some special equipment,
-such as behavior control system, intrusion detection system and traffic collector, 
-and can copy all related traffic from this port
+SPAN port mirroring can copy the inbound/outbound traffic of the interface to
+the specified interface, usually the interface can be connected to some special
+equipment, such as behavior control system, intrusion detection system and
+traffic collector, and can copy all related traffic from this port
 
-VyOS uses the `mirror` option to configure port mirroring. The configuration is divided
-into 2 different directions. Destination ports should be configured for different traffic directions.
+VyOS uses the `mirror` option to configure port mirroring. The configuration
+is divided into 2 different directions. Destination ports should be configured
+for different traffic directions.
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> mirror ingress <monitor-interface>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> mirror
+   ingress <monitor-interface>
 
-   Configure port mirroring for `interface` inbound traffic and copy the traffic to `monitor-interface`
+   Configure port mirroring for `interface` inbound traffic and copy the
+   traffic to `monitor-interface`
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> mirror egress <monitor-interface>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> mirror egress
+   <monitor-interface>
 
-   Configure port mirroring for `interface` outbound traffic and copy the traffic to `monitor-interface`
+   Configure port mirroring for `interface` outbound traffic and copy the
+   traffic to `monitor-interface`
 
    
diff --git a/docs/_include/interface-vlan-8021q.txt b/docs/_include/interface-vlan-8021q.txt
index 63f4433f..1a527590 100644
--- a/docs/_include/interface-vlan-8021q.txt
+++ b/docs/_include/interface-vlan-8021q.txt
@@ -1,20 +1,22 @@
-IEEE 802.1q_, often referred to as Dot1q, is the networking standard that supports
-virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The standard defines a
-system of VLAN tagging for Ethernet frames and the accompanying procedures to be
-used by bridges and switches in handling such frames. The standard also contains
-provisions for a quality-of-service prioritization scheme commonly known as IEEE
-802.1p and defines the Generic Attribute Registration Protocol.
+IEEE 802.1q_, often referred to as Dot1q, is the networking standard that
+supports virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The standard
+defines a system of VLAN tagging for Ethernet frames and the accompanying
+procedures to be used by bridges and switches in handling such frames.
+The standard also contains provisions for a quality-of-service prioritization
+scheme commonly known as IEEE 802.1p and defines the
+Generic Attribute Registration Protocol.
 
 Portions of the network which are VLAN-aware (i.e., IEEE 802.1q_ conformant) can
 include VLAN tags. When a frame enters the VLAN-aware portion of the network, a
-tag is added to represent the VLAN membership. Each frame must be distinguishable
-as being within exactly one VLAN. A frame in the VLAN-aware portion of the network
-that does not contain a VLAN tag is assumed to be flowing on the native VLAN.
+tag is added to represent the VLAN membership. Each frame must be
+distinguishable as being within exactly one VLAN. A frame in the VLAN-aware
+portion of the network that does not contain a VLAN tag is assumed to be
+flowing on the native VLAN.
 
 The standard was developed by IEEE 802.1, a working group of the IEEE 802
 standards committee, and continues to be actively revised. One of the notable
-revisions is 802.1Q-2014 which incorporated IEEE 802.1aq (Shortest Path Bridging)
-and much of the IEEE 802.1d standard.
+revisions is 802.1Q-2014 which incorporated IEEE 802.1aq
+(Shortest Path Bridging) and much of the IEEE 802.1d standard.
 
 802.1q VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
 term used for this is ``vif``.