diff options
Diffstat (limited to 'docs/appendix/examples/azure-vpn-bgp.rst')
| -rw-r--r-- | docs/appendix/examples/azure-vpn-bgp.rst | 128 |
1 files changed, 0 insertions, 128 deletions
diff --git a/docs/appendix/examples/azure-vpn-bgp.rst b/docs/appendix/examples/azure-vpn-bgp.rst deleted file mode 100644 index 57f82396..00000000 --- a/docs/appendix/examples/azure-vpn-bgp.rst +++ /dev/null @@ -1,128 +0,0 @@ -.. _examples-azure-vpn-bgp: - -Route-Based Site-to-Site VPN to Azure (BGP over IKEv2/IPsec) ------------------------------------------------------------- - -This guide shows an example of a route-based IKEv2 site-to-site VPN to -Azure using VTI and BGP for dynamic routing updates. - -Prerequisites -^^^^^^^^^^^^^ - -- A pair of Azure VNet Gateways deployed in active-passive - configuration with BGP enabled. - -- A local network gateway deployed in Azure representing - the Vyos device, matching the below Vyos settings except for - address space, which only requires the Vyos private IP, in - this example 10.10.0.5/32 - -- A connection resource deployed in Azure linking the - Azure VNet gateway and the local network gateway representing - the Vyos device. - -Example -^^^^^^^ - -+---------------------------------------+---------------------+ -| WAN Interface | eth0 | -+---------------------------------------+---------------------+ -| On-premises address space | 10.10.0.0/16 | -+---------------------------------------+---------------------+ -| Azure address space | 10.0.0.0/16 | -+---------------------------------------+---------------------+ -| Vyos public IP | 198.51.100.3 | -+---------------------------------------+---------------------+ -| Vyos private IP | 10.10.0.5 | -+---------------------------------------+---------------------+ -| Azure VNet Gateway public IP | 203.0.113.2 | -+---------------------------------------+---------------------+ -| Azure VNet Gateway BGP IP | 10.0.0.4 | -+---------------------------------------+---------------------+ -| Pre-shared key | ch00s3-4-s3cur3-psk | -+---------------------------------------+---------------------+ -| Vyos ASN | 64499 | -+---------------------------------------+---------------------+ -| Azure ASN | 65540 | -+---------------------------------------+---------------------+ - -Vyos configuration -^^^^^^^^^^^^^^^^^^ - -- Configure the IKE and ESP settings to match a subset - of those supported by Azure: - -.. code-block:: none - - set vpn ipsec esp-group AZURE compression 'disable' - set vpn ipsec esp-group AZURE lifetime '3600' - set vpn ipsec esp-group AZURE mode 'tunnel' - set vpn ipsec esp-group AZURE pfs 'dh-group2' - set vpn ipsec esp-group AZURE proposal 1 encryption 'aes256' - set vpn ipsec esp-group AZURE proposal 1 hash 'sha1' - - set vpn ipsec ike-group AZURE dead-peer-detection action 'restart' - set vpn ipsec ike-group AZURE dead-peer-detection interval '15' - set vpn ipsec ike-group AZURE dead-peer-detection timeout '30' - set vpn ipsec ike-group AZURE ikev2-reauth 'yes' - set vpn ipsec ike-group AZURE key-exchange 'ikev2' - set vpn ipsec ike-group AZURE lifetime '28800' - set vpn ipsec ike-group AZURE proposal 1 dh-group '2' - set vpn ipsec ike-group AZURE proposal 1 encryption 'aes256' - set vpn ipsec ike-group AZURE proposal 1 hash 'sha1' - -- Enable IPsec on eth0 - -.. code-block:: none - - set vpn ipsec ipsec-interfaces interface 'eth0' - -- Configure a VTI with a dummy IP address - -.. code-block:: none - - set interfaces vti vti1 address '10.10.1.5/32' - set interfaces vti vti1 description 'Azure Tunnel' - -- Clamp the VTI's MSS to 1350 to avoid PMTU blackholes. - -.. code-block:: none - - set firewall options interface vti1 adjust-mss 1350 - -- Configure the VPN tunnel - -.. code-block:: none - - set vpn ipsec site-to-site peer 203.0.113.2 authentication id '198.51.100.3' - set vpn ipsec site-to-site peer 203.0.113.2 authentication mode 'pre-shared-secret' - set vpn ipsec site-to-site peer 203.0.113.2 authentication pre-shared-secret 'ch00s3-4-s3cur3-psk' - set vpn ipsec site-to-site peer 203.0.113.2 authentication remote-id '203.0.113.2' - set vpn ipsec site-to-site peer 203.0.113.2 connection-type 'respond' - set vpn ipsec site-to-site peer 203.0.113.2 description 'AZURE PRIMARY TUNNEL' - set vpn ipsec site-to-site peer 203.0.113.2 ike-group 'AZURE' - set vpn ipsec site-to-site peer 203.0.113.2 ikev2-reauth 'inherit' - set vpn ipsec site-to-site peer 203.0.113.2 local-address '10.10.0.5' - set vpn ipsec site-to-site peer 203.0.113.2 vti bind 'vti1' - set vpn ipsec site-to-site peer 203.0.113.2 vti esp-group 'AZURE' - -- **Important**: Add an interface route to reach Azure's BGP listener - -.. code-block:: none - - set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1 - -- Configure your BGP settings - -.. code-block:: none - - set protocols bgp 64499 neighbor 10.0.0.4 remote-as '65540' - set protocols bgp 64499 neighbor 10.0.0.4 address-family ipv4-unicast soft-reconfiguration 'inbound' - set protocols bgp 64499 neighbor 10.0.0.4 timers holdtime '30' - set protocols bgp 64499 neighbor 10.0.0.4 timers keepalive '10' - -- **Important**: Disable connected check \ - -.. code-block:: none - - set protocols bgp 64499 neighbor 10.0.0.4 disable-connected-check |