diff options
Diffstat (limited to 'docs/appendix/examples/ospf-unnumbered.rst')
| -rw-r--r-- | docs/appendix/examples/ospf-unnumbered.rst | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/docs/appendix/examples/ospf-unnumbered.rst b/docs/appendix/examples/ospf-unnumbered.rst deleted file mode 100644 index 39f8f69a..00000000 --- a/docs/appendix/examples/ospf-unnumbered.rst +++ /dev/null @@ -1,118 +0,0 @@ -.. _examples-ospf-unnumbered: - -######################### -OSPF unnumbered with ECMP -######################### - -General infomration can be found in the :ref:`routing-ospf` chapter. - -Configuration -============= - -- Router A: - -.. code-block:: none - - set interfaces ethernet eth0 address '10.0.0.1/24' - set interfaces ethernet eth1 address '192.168.0.1/32' - set interfaces ethernet eth1 ip ospf authentication md5 key-id 1 md5-key 'yourpassword' - set interfaces ethernet eth1 ip ospf network 'point-to-point' - set interfaces ethernet eth2 address '192.168.0.1/32' - set interfaces ethernet eth2 ip ospf authentication md5 key-id 1 md5-key 'yourpassword' - set interfaces ethernet eth2 ip ospf network 'point-to-point' - set interfaces loopback lo address '192.168.0.1/32' - set protocols ospf area 0.0.0.0 authentication 'md5' - set protocols ospf area 0.0.0.0 network '192.168.0.1/32' - set protocols ospf parameters router-id '192.168.0.1' - set protocols ospf redistribute connected - -- Router B: - -.. code-block:: none - - set interfaces ethernet eth0 address '10.0.0.2/24' - set interfaces ethernet eth1 address '192.168.0.2/32' - set interfaces ethernet eth1 ip ospf authentication md5 key-id 1 md5-key 'yourpassword' - set interfaces ethernet eth1 ip ospf network 'point-to-point' - set interfaces ethernet eth2 address '192.168.0.2/32' - set interfaces ethernet eth2 ip ospf authentication md5 key-id 1 md5-key 'yourpassword' - set interfaces ethernet eth2 ip ospf network 'point-to-point' - set interfaces loopback lo address '192.168.0.2/32' - set protocols ospf area 0.0.0.0 authentication 'md5' - set protocols ospf area 0.0.0.0 network '192.168.0.2/32' - set protocols ospf parameters router-id '192.168.0.2' - set protocols ospf redistribute connected - - -Results -======= - -- Router A: - -.. code-block:: none - - vyos@vyos:~$ show interfaces - Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down - Interface IP Address S/L Description - --------- ---------- --- ----------- - eth0 10.0.0.1/24 u/u - eth1 192.168.0.1/32 u/u - eth2 192.168.0.1/32 u/u - lo 127.0.0.1/8 u/u - 192.168.0.1/32 - ::1/128 - -.. code-block:: none - - vyos@vyos:~$ show ip route - Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, - F - PBR, f - OpenFabric, - > - selected route, * - FIB route, q - queued route, r - rejected route - - S>* 0.0.0.0/0 [210/0] via 10.0.0.254, eth0, 00:57:34 - O 10.0.0.0/24 [110/20] via 192.168.0.2, eth1 onlink, 00:13:21 - via 192.168.0.2, eth2 onlink, 00:13:21 - C>* 10.0.0.0/24 is directly connected, eth0, 00:57:35 - O 192.168.0.1/32 [110/0] is directly connected, lo, 00:48:53 - C * 192.168.0.1/32 is directly connected, eth2, 00:56:31 - C * 192.168.0.1/32 is directly connected, eth1, 00:56:31 - C>* 192.168.0.1/32 is directly connected, lo, 00:57:36 - O>* 192.168.0.2/32 [110/1] via 192.168.0.2, eth1 onlink, 00:29:03 - * via 192.168.0.2, eth2 onlink, 00:29:03 - -- Router B: - -.. code-block:: none - - vyos@vyos:~$ show interfaces - Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down - Interface IP Address S/L Description - --------- ---------- --- ----------- - eth0 10.0.0.2/24 u/u - eth1 192.168.0.2/32 u/u - eth2 192.168.0.2/32 u/u - lo 127.0.0.1/8 u/u - 192.168.0.2/32 - ::1/128 - -.. code-block:: none - - vyos@vyos:~$ show ip route - Codes: K - kernel route, C - connected, S - static, R - RIP, - O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, - T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, - F - PBR, f - OpenFabric, - > - selected route, * - FIB route, q - queued route, r - rejected route - - S>* 0.0.0.0/0 [210/0] via 10.0.0.254, eth0, 00:57:34 - O 10.0.0.0/24 [110/20] via 192.168.0.1, eth1 onlink, 00:13:21 - via 192.168.0.1, eth2 onlink, 00:13:21 - C>* 10.0.0.0/24 is directly connected, eth0, 00:57:35 - O 192.168.0.2/32 [110/0] is directly connected, lo, 00:48:53 - C * 192.168.0.2/32 is directly connected, eth2, 00:56:31 - C * 192.168.0.2/32 is directly connected, eth1, 00:56:31 - C>* 192.168.0.2/32 is directly connected, lo, 00:57:36 - O>* 192.168.0.1/32 [110/1] via 192.168.0.1, eth1 onlink, 00:29:03 - * via 192.168.0.1, eth2 onlink, 00:29:03 |