1 files changed, 0 insertions, 435 deletions
diff --git a/docs/appendix/release-notes.rst b/docs/appendix/release-notes.rst
deleted file mode 100644
index 7ba8baaf..00000000
--- a/docs/appendix/release-notes.rst
+++ /dev/null
@@ -1,435 +0,0 @@
-.. _release-notes:
-
-#############
-Release Notes
-#############
-
-******************
-Version 1.2 - Crux
-******************
-
-1.2.6-S1
-========
-
-1.2.6-S1 is a security release release made in September 2020.
-
-Resolved issues
----------------
-
-VyOS 1.2.6 release was found to be suspectible to CVE-2020-10995. It's a low-
-impact vulnerability in the PowerDNS recursor that allows an attacker to cause
-performance degradation via a specially crafted authoritative DNS server reply.
-
-* :vytask:`2899` remote syslog server migration error on update
-
-1.2.6
-=====
-
-1.2.6 is a maintenance release made in September 2020.
-
-Resolved issues
----------------
-
-* :vytask:`103` DHCP server prepends shared network name to hostnames
-* :vytask:`125` Missing PPPoE interfaces in l2tp configuration
-* :vytask:`1194` cronjob is being setup even if not saved
-* :vytask:`1205` module pcspkr missing
-* :vytask:`1219` Redundant active-active configuration, asymmetric routing and
-  conntrack-sync cache
-* :vytask:`1220` Show transceiver information from plugin modules, e.g SFP+,
-  QSFP
-* :vytask:`1221` BGP - Default route injection is not processed by the specific
-  route-map
-* :vytask:`1241` Remove of policy route throws CLI error
-* :vytask:`1291` Under certain conditions the VTI will stay forever down
-* :vytask:`1463` Missing command `show ip bgp scan` appears in command
-  completion
-* :vytask:`1575` `show snmp mib ifmib` crashes with IndexError
-* :vytask:`1699` Default net.ipv6.route.max_size 32768 is too low
-* :vytask:`1729` PIM (Protocol Independent Multicast) implementation
-* :vytask:`1901` Semicolon in values is interpreted as a part of the shell
-  command by validators
-* :vytask:`1934` Change default hostname when deploy from OVA without params.
-* :vytask:`1938` syslog doesn't start automatically
-* :vytask:`1949` Multihop IPv6 BFD is unconfigurable
-* :vytask:`1953` DDNS service name validation rejects valid service names
-* :vytask:`1956` PPPoE server: support PADO-delay
-* :vytask:`1973` Allow route-map to match on BGP local preference value
-* :vytask:`1974` Allow route-map to set administrative distance
-* :vytask:`1982` Increase rotation for atop.acct
-* :vytask:`1983` Expose route-map when BGP routes are programmed in to FIB
-* :vytask:`1985` pppoe: Enable ipv6 modules without configured ipv6 pools
-* :vytask:`2000` strongSwan does not install routes to table 220 in certain
-  cases
-* :vytask:`2021` OSPFv3 doesn't support decimal area syntax
-* :vytask:`2062` Wrong dhcp-server static route subnet bytes
-* :vytask:`2091` swanctl.conf file is not generated properly is more than one
-  IPsec profile is used
-* :vytask:`2131` Improve syslog remote host CLI definition
-* :vytask:`2224` Update Linux Kernel to v4.19.114
-* :vytask:`2286` IPoE server vulnerability
-* :vytask:`2303` Unable to delete the image version that came from OVA
-* :vytask:`2305` Add release name to "show version" command
-* :vytask:`2311` Statically configured name servers may not take precedence
-  over ones from DHCP
-* :vytask:`2327` Unable to create syslog server entry with different port
-* :vytask:`2332` Backport node option for a syslog server
-* :vytask:`2342` Bridge l2tpv3 + ethX errors
-* :vytask:`2344` PPPoE server client static IP assignment silently fails
-* :vytask:`2385` salt-minion: improve completion helpers
-* :vytask:`2389` BGP community-list unknown command
-* :vytask:`2398` op-mode "dhcp client leases interface" completion helper
-  misses interfaces
-* :vytask:`2402` Live ISO should warn when configuring that changes won't
-  persist
-* :vytask:`2443` NHRP: Add debugging information to syslog
-* :vytask:`2448` `monitor protocol bgp` subcommands fail with 'command
-  incomplete'
-* :vytask:`2458` Update FRR to 7.3.1
-* :vytask:`2476` Bond member description change leads to network outage
-* :vytask:`2478` login radius: use NAS-IP-Address if defined source address
-* :vytask:`2482` Update PowerDNS recursor to 4.3.1 for CVE-2020-10995
-* :vytask:`2517` vyos-container: link_filter: No such file or directory
-* :vytask:`2526` Wake-On-Lan CLI implementation
-* :vytask:`2528` "update dns dynamic" throws FileNotFoundError excepton
-* :vytask:`2536` "show log dns forwarding" still refers to dnsmasq
-* :vytask:`2538` Update Intel NIC drivers to recent release (preparation for
-  Kernel >=5.4)
-* :vytask:`2545` Show physical device offloading capabilities for specified
-  ethernet interface
-* :vytask:`2563` Wrong interface binding for Dell VEP 1445
-* :vytask:`2605` SNMP service is not disabled by default
-* :vytask:`2625` Provide generic Library for package builds
-* :vytask:`2686` FRR: BGP: large-community configuration is not applied
-  properly after upgrading FRR to 7.3.x series
-* :vytask:`2701` `vpn ipsec pfs enable` doesn't work with IKE groups
-* :vytask:`2728` Protocol option ignored for IPSec peers in transport mode
-* :vytask:`2734` WireGuard: fwmark CLI definition is inconsistent
-* :vytask:`2757` "show system image version" contains additional new-line
-  character breaking output
-* :vytask:`2797` Update Linux Kernel to v4.19.139
-* :vytask:`2822` Update Linux Kernel to v4.19.141
-* :vytask:`2829` PPPoE server: mppe setting is implemented as node instead of
-  leafNode
-* :vytask:`2831` Update Linux Kernel to v4.19.142
-* :vytask:`2852` rename dynamic dns interface breaks ddclient.cache permissions
-* :vytask:`2853` Intel QAT acceleration does not work
-
-1.2.5
-=====
-
-1.2.5 is a maintenance release made in April 2020.
-
-Resolved issues
----------------
-
-* :vytask:`1020` OSPF Stops distributing default route after a while
-* :vytask:`1228` pppoe default-route force option not working (Rel 1.2.0-rc11)
-* :vytask:`1301` bgp peer-groups don't work when "no-ipv4-unicast" is enabled.
-* :vytask:`1341` Adding rate-limiter for pppoe server users
-* :vytask:`1376` Incorrect DHCP lease counting
-* :vytask:`1392` Large firewall rulesets cause the system to lose configuration
-  and crash at startup
-* :vytask:`1416` 2 dhcp server run in failover mode can't sync hostname with
-  each other
-* :vytask:`1452` accel-pppoe - add vendor option to shaper
-* :vytask:`1490` BGP configuration (is lost|not applied) when updating 1.1.8 ->
-  1.2.1
-* :vytask:`1780` Adding ipsec ike closeaction
-* :vytask:`1803` Unbind NTP while it's not requested...
-* :vytask:`1821` "authentication mode radius" has no effect for PPPoE server
-* :vytask:`1827` Increase default gc_thresh
-* :vytask:`1828` Missing completion helper for "set system syslog host
-  192.0.2.1 facility all protocol"
-* :vytask:`1832` radvd adding feature DNSSL branch.example.com example.com to
-  existing package
-* :vytask:`1837` PPPoE unrecognized option 'replacedefaultroute'
-* :vytask:`1851` wireguard - changing the pubkey on an existing peer seems to
-  destroy the running config.
-* :vytask:`1858` l2tp: Delete depricated outside-nexthop and add gateway-address
-* :vytask:`1864` Lower IPSec DPD timeout lower limit from 10s -> 2s
-* :vytask:`1879` Extend Dynamic DNS XML definition value help strings and
-  validators
-* :vytask:`1881` Execute permissions are removed from custom SNMP scripts at
-  commit time
-* :vytask:`1884` Keeping VRRP transition-script native behaviour and adding
-  stop-script
-* :vytask:`1891` Router announcements broken on boot
-* :vytask:`1900` Enable SNMP for VRRP.
-* :vytask:`1902` Add redistribute non main table in bgp
-* :vytask:`1909` Incorrect behaviour of static routes with overlapping networks
-* :vytask:`1913` "system ipv6 blacklist" command has no effect
-* :vytask:`1914` IPv6 multipath hash policy does not apply
-* :vytask:`1917` Update WireGuard to Debian release 0.0.20191219-1
-* :vytask:`1934` Change default hostname when deploy from OVA without params.
-* :vytask:`1935` NIC identification and usage problem in Hyper-V environments
-* :vytask:`1936` pppoe-server CLI control features
-* :vytask:`1964` SNMP Script-extensions allows names with spaces, but commit
-  fails
-* :vytask:`1967` BGP parameter "enforce-first-as" does not work anymore
-* :vytask:`1970` Correct adding interfaces on boot
-* :vytask:`1971` Missing modules in initrd.img for PXE boot
-* :vytask:`1998` Update FRR to 7.3
-* :vytask:`2001` Error when router reboot
-* :vytask:`2032` Monitor bandwidth bits
-* :vytask:`2059` Set source-validation on bond vif don't work
-* :vytask:`2066` PPPoE interface can be created multiple times - last wins
-* :vytask:`2069` PPPoE-client does not works with service-name option
-* :vytask:`2077` ISO build from crux branch is failing
-* :vytask:`2079` Update Linux Kernel to v4.19.106
-* :vytask:`2087` Add maxfail 0 option to pppoe configuration.
-* :vytask:`2100` BGP route adverisement wih checks rib
-* :vytask:`2120` "reset vpn ipsec-peer" doesn't work with named peers
-* :vytask:`2197` Cant add vif-s interface into a bridge
-* :vytask:`2228` WireGuard does not allow ports < 1024 to be used
-* :vytask:`2252` HTTP API add system image can return '504 Gateway Time-out'
-* :vytask:`2272` Set system flow-accounting disable-imt has syntax error
-* :vytask:`2276` PPPoE server vulnerability
-
-
-1.2.4
-=====
-
-1.2.4 is a maintenance release made in December 2019.
-
-Resolved issues
----------------
-
-* :vytask:`T258` Can not configure wan load-balancing on vyos-1.2
-* :vytask:`T818` SNMP v3 - remove required engineid from user node
-* :vytask:`T1030` Upgrade ddclient from 3.8.2 to 3.9.0 (support Cloudflare
-  API v4)
-* :vytask:`T1183` BFD Support via FRR
-* :vytask:`T1299` Allow SNMPd to be extended with custom scripts
-* :vytask:`T1351` accel-pppoe adding CIDR based IP pool option
-* :vytask:`T1391` In route-map set community additive
-* :vytask:`T1394` syslog systemd and host_name.py race condition
-* :vytask:`T1401` Copying files with the FTP protocol fails if the password
-  contains special characters
-* :vytask:`T1421` OpenVPN client push-route stopped working, needs added quotes
-  to fix
-* :vytask:`T1430` Add options for custom DHCP client-id and hostname
-* :vytask:`T1447` Python subprocess called without import in host_name.py
-* :vytask:`T1470` improve output of "show dhcpv6 server leases"
-* :vytask:`T1485` Enable 'AdvIntervalOpt' option in for radvd.conf
-* :vytask:`T1496` Separate rolling release and LTS kernel builds
-* :vytask:`T1560` "set load-balancing wan rule 0" causes segfault and prevents
-  load balancing from starting
-* :vytask:`T1568` strip-private command improvement for additional masking of
-  IPv6 and MAC address
-* :vytask:`T1578` completion offers "show table", but show table does not exist
-* :vytask:`T1593` Support ip6gre
-* :vytask:`T1597` /usr/sbin/rsyslogd after deleting "system syslog"
-* :vytask:`T1638` vyos-hostsd not setting system domain name
-* :vytask:`T1678` hostfile-update missing line feed
-* :vytask:`T1694` NTPd: Do not listen on all interfaces by default
-* :vytask:`T1701` Delete domain-name and domain-search won't work
-* :vytask:`T1705` High CPU usage by bgpd when snmp is active
-* :vytask:`T1707` DHCP static mapping and exclude address not working
-* :vytask:`T1708` Update Rolling Release Kernel to 4.19.76
-* :vytask:`T1709` Update WireGuard to 0.0.20190913
-* :vytask:`T1716` Update Intel NIC drivers to recent versions
-* :vytask:`T1726` Update Linux Firmware binaries to a more recent version
-  2019-03-14 -> 2019-10-07
-* :vytask:`T1728` Update Linux Kernel to 4.19.79
-* :vytask:`T1737` SNMP tab completion missing
-* :vytask:`T1738` Copy SNMP configuration from node to node raises exception
-* :vytask:`T1740` Broken OSPFv2 virtual-link authentication
-* :vytask:`T1742` NHRP unable to commit.
-* :vytask:`T1745` dhcp-server commit fails with "DHCP range stop address x must
-  be greater or equal to the range start address y!" when static mapping has
-  same IP as range stop
-* :vytask:`T1749` numeric validator doesn't support multiple ranges
-* :vytask:`T1769` Remove complex SNMPv3 Transport Security Model (TSM)
-* :vytask:`T1772` <regex> constraints in XML are partially broken
-* :vytask:`T1778` Kilobits/Megabits difference in configuration Vyos/FRR
-* :vytask:`T1780` Adding ipsec ike closeaction
-* :vytask:`T1786` disable-dhcp-nameservers is missed in current host_name.py
-  implementation
-* :vytask:`T1788` Intel QAT (QuickAssist Technology ) implementation
-* :vytask:`T1792` Update WireGuard to Debian release 0.0.20191012-1
-* :vytask:`T1800` Update Linux Kernel to v4.19.84
-* :vytask:`T1809` Wireless: SSID scan does not work in AP mode
-* :vytask:`T1811` Upgrade from 1.1.8: Config file migration failed: module=l2tp
-* :vytask:`T1812` DHCP: hostnames of clients not resolving after update v1.2.3
-  -> 1.2-rolling
-* :vytask:`T1819` Reboot kills SNMPv3 configuration
-* :vytask:`T1822` Priority inversion wireless interface dhcpv6
-* :vytask:`T1825` Improve DHCP configuration error message
-* :vytask:`T1836` import-conf-mode-commands in vyos-1x/scripts fails to create
-  an XML
-* :vytask:`T1839` LLDP shows "VyOS unknown" instead of "VyOS"
-* :vytask:`T1841` PPP ipv6-up.d direcotry missing
-* :vytask:`T1893` igmp-proxy: Do not allow adding unknown interface
-* :vytask:`T1903` Implementation udev predefined interface naming
-* :vytask:`T1904` update eth1 and eth2 link files for the vep4600
-
-
-1.2.3
-=====
-
-1.2.3 is a maintenance and feature backport release made in September 2019.
-
-New features
-------------
-
-* HTTP API
-* :vytask:`T1524` "set service dns forwarding allow-from <IPv4 net|IPv6 net>"
-  option for limiting queries to specific client networks
-* :vytask:`T1503` Functions for checking if a commit is in progress
-* :vytask:`T1543` "set system contig-mangement commit-archive source-address"
-  option
-* :vytask:`T1554` Intel NIC drivers now support receive side scaling and
-  multiqueue
-
-Resolved issues
----------------
-
-* :vytask:`T1209` OSPF max-metric values over 100 no longer causes commit
-  errors
-* :vytask:`T1333` Fixes issue with DNS forwarding not performing recursive
-  lookups on domain specific forwarders
-* :vytask:`T1362` Special characters in VRRP passwords are handled correctly
-* :vytask:`T1377` BGP weight is applied properly
-* :vytask:`T1420` Fixed permission for log files
-* :vytask:`T1425` Wireguard interfaces now support /31 addresses
-* :vytask:`T1428` Wireguard correctly handles firewall marks
-* :vytask:`T1439` DHCPv6 static mappings now work correctly
-* :vytask:`T1450` Flood ping commands now works correctly
-* :vytask:`T1460` Op mode "show firewall" commands now support counters longer
-  than 8 digits (T1460)
-* :vytask:`T1465` Fixed priority inversion in VTI commands
-* :vytask:`T1468` Fixed remote-as check in the BGP route-reflector-client option
-* :vytask:`T1472` It's now possible to re-create VRRP groups with RFC
-  compatibility mode enabled
-* :vytask:`T1527` Fixed a typo in DHCPv6 server help strings
-* :vytask:`T1529` Unnumbered BGP peers now support VLAN interfaces
-* :vytask:`T1530` Fixed "set system syslog global archive file" command
-* :vytask:`T1531` Multiple fixes in cluster configuration scripts
-* :vytask:`T1537` Fixed missing help text for "service dns"
-* :vytask:`T1541` Fixed input validation in DHCPv6 relay options
-* :vytask:`T1551` It's now possible to create a QinQ interface and a firewall
-  assigned to it in one commit
-* :vytask:`T1559` URL filtering now uses correct rule database path and works
-  again
-* :vytask:`T1579` "show log vpn ipsec" command works again
-* :vytask:`T1576` "show arp interface <intf>" command works again
-* :vytask:`T1605` Fixed regression in L2TP/IPsec server
-* :vytask:`T1613` Netflow/sFlow captures IPv6 traffic correctly
-* :vytask:`T1616` "renew dhcpv6" command now works from op mode
-* :vytask:`T1642` BGP remove-private-as option iBGP vs eBGP check works
-  correctly now
-* :vytask:`T1540`, :vytask:`T1360`, :vytask:`T1264`, :vytask:`T1623` Multiple
-  improvements in name servers and hosts configuration handling
-
-Internals
----------
-
-``/etc/resolv.conf`` and ``/etc/hosts`` files are now managed by the
-*vyos-hostsd* service that listens on a ZMQ socket for update messages.
-
-1.2.2
-=====
-
-1.2.2 is a maintenance release made in July 2019.
-
-New features
-------------
-
-* Options for per-interface MSS clamping.
-* BGP extended next-hop capability
-* Relaxed BGP multipath option
-* Internal and external options for "remote-as" (accept any AS as long as it's
-  the same to this router or different, respectively)
-* "Unnumbered" (interface-based) BGP peers
-* BGP no-prepend option
-* Additive BGP community option
-* OSPFv3 network type option
-* Custom arguments for VRRP scripts
-* A script for querying values from config files
-
-Resolved issues
----------------
-
-* Linux kernel 4.19.54, including a fix for the TCP SACK vulnerability
-* :vytask:`T1371` VRRP health-check scripts now can use arguments
-* :vytask:`T1497` DNS server addresses coming from a DHCP server are now
-  correctly propagated to resolv.conf
-* :vytask:`T1469` Domain-specific name servers in DNS forwarding are now used
-  for recursive queries
-* :vytask:`T1433` ``run show dhcpv6 server leases`` now display leases correctly
-* :vytask:`T1461` Deleting ``firewall options`` node no longer causes errors
-* :vytask:`T1458` Correct hostname is sent to remote syslog again
-* :vytask:`T1438` Board serial number from DMI is correctly displayed in
-  ``show version``
-* :vytask:`T1358`, :vytask:`T1355`, :vytask:`T1294` Multiple corrections in
-  remote syslog config
-* :vytask:`T1255` Fixed missing newline in ``/etc/hosts``
-* :vytask:`T1174` ``system domain-name`` is correctly included in
-  ``/etc/resolv.conf``
-* :vytask:`T1465` Fixed priority inversion in ``interfaces vti vtiX ip``
-  settings
-* :vytask:`T1446` Fixed errors when installing with RAID1 on UEFI machines
-* :vytask:`T1387` Fixed an error on disabling an interfaces that has no address
-* :vytask:`T1367` Fixed deleting VLAN interface with non-default MTU
-* :vytask:`T1505` vyos.config ``return_effective_values()`` function now
-  correctly returns a list rather than a string
-
-1.2.1
-=====
-
-VyOS 1.2.1 is a maintenance release made in April 2019.
-
-Resolved issues
----------------
-
-* Package updates: kernel 4.19.32, open-vm-tools 10.3, latest Intel NIC drivers
-* :vytask:`T1326` The kernel now includes drivers for various USB serial
-  adapters, which allows people to add a serial console to a machine without
-  onboard RS232, or connect to something else from the router
-* The collection of network card firmware is now much more extensive
-* :vytask:`T1271` VRRP now correctly uses a virtual rather than physical MAC
-  addresses in the RFC-compliant mode
-* :vytask:`T1330` DHCP WPAD URL option works correctly again
-* :vytask:`T1312` Many to many NAT rules now can use source/destination and
-  translation networks of non-matching size. If 1:1 network bits translation is
-  desired, it's now users responsibility to check if prefix length matches.
-* :vytask:`T1290` IPv6 network prefix translation is fixed
-* :vytask:`T1308` Non-alphanumeric characters such as ``>`` can now be safely
-  used in PPPoE passwords
-* :vytask:`T1305` ``show | commands`` no longer fails when a config section ends
-  with a leaf node such as ``timezone`` in ``show system | commands``
-* :vytask:`T1235` ``show | commands`` correctly works in config mode now
-* :vytask:`T1298` VTI is now compatible with the DHCP-interface IPsec option
-* :vytask:`T1277` ``show dhcp server statistics`` command was broken in latest
-  Crux
-* :vytask:`T1261` An issue with TFTP server refusing to listen on addresses
-  other than loopback was fixed
-* :vytask:`T1224` Template issue that might cause UDP broadcast relay fail to
-  start is fixed
-* :vytask:`T1067` VXLAN value validation is improved
-* :vytask:`T1211` Blank hostnames in DHCP updates no longer can crash DNS
-  forwarding
-* :vytask:`T1322` Correct configuration is now generated for DHCPv6 relays with
-  more than one upstream interface
-* :vytask:`T1234` ``relay-agents-packets`` option works correctly now
-* :vytask:`T1231` Dynamic DNS data is now cleaned on configuration change
-* :vytask:`T1282` Remote Syslog can now use a fully qualified domain name
-* :vytask:`T1279` ACPI power off works again
-* :vytask:`T1247` Negation in WAN load balancing rules works again
-* :vytask:`T1218` FRR staticd now starts on boot correctly
-* :vytask:`T1296` The installer now correctly detects SD card devices
-* :vytask:`T1225` Wireguard peers can be disabled now
-* :vytask:`T1217` The issue with Wireguard interfaces impossible to delete
-  is fixed
-* :vytask:`T1160` Unintended IPv6 access is fixed in SNMP configuration
-* :vytask:`T1060` It's now possible to exclude hosts from the transparent
-  web proxy
-* :vytask:`T484` An issue with rules impossible to delete from the zone-based
-  firewall is fixed
-
-Earlier releases
-================
-
-Release notes for legacy versions (1.1.x, 1.0.x) can be found in the
-`archived wiki <https://web.archive.org/web/20200212180711/https://wiki.vyos.net/wiki/Category:Release_notes>`_.