diff options
Diffstat (limited to 'docs/appendix/vyos-on-baremetal.rst')
| -rw-r--r-- | docs/appendix/vyos-on-baremetal.rst | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/docs/appendix/vyos-on-baremetal.rst b/docs/appendix/vyos-on-baremetal.rst index 50ef900c..41f44912 100644 --- a/docs/appendix/vyos-on-baremetal.rst +++ b/docs/appendix/vyos-on-baremetal.rst @@ -269,8 +269,8 @@ Installation * Begin rapidly pressing Delete on the keyboard. The boot prompt is very quick, but with a few tries you should be able to get into the BIOS. * Chipset > South Bridge > USB Configuration: set XHCI to Disabled and USB 2.0 (EHCI) to Enabled. Without doing this, the USB drive won't boot. * Boot to the VyOS installer and install as usual. -Warning the interface labels on my device are backwards; the left-most "LAN4" port is eth0 and the right-most "LAN1" port is eth3. +Warning the interface labels on my device are backwards; the left-most "LAN4" port is eth0 and the right-most "LAN1" port is eth3. Acrosser AND-J190N1 ******************* @@ -298,6 +298,7 @@ Advanced > Serial Port Console Redirection > Console Redirection Settings: * Terminal Type : VT100+ * Bits per second : 9600 + Then save, reboot and change serial speed to 9600 on your client. |