1 files changed, 101 insertions, 0 deletions
diff --git a/docs/appendix/vyos-on-baremetal.rst b/docs/appendix/vyos-on-baremetal.rst
index bda81116..9ab527ce 100644
--- a/docs/appendix/vyos-on-baremetal.rst
+++ b/docs/appendix/vyos-on-baremetal.rst
@@ -70,3 +70,104 @@ Pictures
 .. figure:: /_static/images/1u_vyos_front_10ge_open_4.jpg
    :scale: 25 %
    :alt: CSE-505-203B w/ 10GE Open
+
+
+PC Engines APU
+**************
+
+As this platform seems to be quiet common in terms of noise, cost, power and
+performance it makes sense to write a small installation manual.
+
+This guide was developed using an APU4C4 board with the following specs:
+
+* AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI
+  support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
+* 4 GB DDR3-1333 DRAM, with optional ECC support
+* About 6 to 10W of 12V DC power depending on CPU load
+* 2 miniPCI express (one with SIM socket for 3G modem).
+* 4 Gigabit Ethernet channels using Intel i211AT NICs
+
+VyOS 1.2 (crux)
+---------------
+
+Depending on the VyOS versions you intend to install there is a difference in
+the serial port settings (see https://phabricator.vyos.net/T1327).
+
+Create a bootable USB pendrive using e.g. Rufus_ on a Windows machine.
+
+Connect serial port to a PC through null modem cable (RXD / TXD crossed over).
+Set terminal emulator to 115200 8N1.
+
+.. code-block:: sh
+
+  PC Engines apu4
+  coreboot build 20171130
+  BIOS version v4.6.4
+  4080 MB ECC DRAM
+  SeaBIOS (version rel-1.11.0.1-0-g90da88d)
+
+  Press F10 key now for boot menu:
+
+  Select boot device:
+
+  1. ata0-0: KINGSTON SUV500MS120G ATA-11 Hard-Disk (111 GiBytes)
+  2. USB MSC Drive Generic Flash Disk 8.07
+  3. Payload [memtest]
+  4. Payload [setup]
+
+Now boot from the ``USB MSC Drive Generic Flash Disk 8.07`` media by pressing
+``2``, the VyOS boot menu will appear, just wait 10 seconds or press ``Enter``
+to continue.
+
+.. code-block:: sh
+
+  lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
+  x                      VyOS - Boot Menu                      x
+  tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
+  x Live (amd64-vyos)                                          x
+  x Live (amd64-vyos failsafe)                                 x
+  x                                                            x
+  mqqqqqqPress ENAutomatic boot in 10 seconds...nu entryqqqqqqqj
+
+The image will be loaded and the last lines you will get will be:
+
+.. code-block:: sh
+
+  Loading /live/vmlinuz... ok
+  Loading /live/initrd.img...
+
+The Kernel will now spin up using a different console setting. Set terminal
+emulator to 9600 8N1 and after a while your console will show:
+
+.. code-block:: sh
+
+  Loading /live/vmlinuz... ok
+  Loading /live/initrd.img...
+  Welcome to VyOS - vyos ttyS0
+
+  vyos login:
+
+You can now proceed with a regular image installation as described in
+:ref:`installation`.
+
+As the APU board itself still used a serial setting of 115200 8N1 it is strongly
+recommended that you change the VyOS serial interface settings after your first
+successful boot.
+
+Use the following command to adjust the :ref:`serial-console` settings:
+
+.. code-block:: sh
+
+  set system console device ttyS0 speed 115200
+
+.. note:: Once you ``commit`` the above changes access to the serial interface
+   is lost until you set your terminal emulator to 115200 8N1 again.
+
+.. code-block:: sh
+
+  vyos@vyos# show system console
+   device ttyS0 {
+     speed 115200
+   }
+
+.. _Rufus: https://rufus.ie/