diff options
Diffstat (limited to 'docs/automation/cloud-init.rst')
| -rw-r--r-- | docs/automation/cloud-init.rst | 32 |
1 files changed, 30 insertions, 2 deletions
diff --git a/docs/automation/cloud-init.rst b/docs/automation/cloud-init.rst index 94123e54..506a2ef4 100644 --- a/docs/automation/cloud-init.rst +++ b/docs/automation/cloud-init.rst @@ -44,7 +44,7 @@ described below. Cloud-config modules ******************** -In VyOS, by default, enabled only two modules: +In VyOS, by default, enabled three modules: * ``write_files`` - this module allows to insert any files into the filesystem before the first boot, for example, pre-generated encryption keys, @@ -52,13 +52,19 @@ In VyOS, by default, enabled only two modules: * ``vyos_userdata`` - the module accepts a list of CLI configuration commands in a ``vyos_config_commands`` section, which gives an easy way to configure the system during deployment. +* ``vyos_install`` - this module allows to install VyOS without human intervention. ************************ cloud-config file format ************************ A cloud-config document is written in YAML. The file must begin -with ``#cloud-config`` line. The key used to designate a VyOS configuration +with ``#cloud-config`` line. + +************************ +Module vyos_userdata +************************ +The key used to designate a VyOS configuration is ``vyos_config_commands``. What follows is VyOS configuration using the "set-style" syntax. Both "set" and "delete" commands are supported. @@ -88,6 +94,28 @@ Here is an example cloud-config. - set interfaces ethernet eth1 address '192.0.2.247/24' - set protocols static route 198.51.100.0/24 next-hop '192.0.2.1' +************************ +Module vyos_install +************************ +This module allows to install VyOS without human intervention. +It will be useful for the installation via a network like PXE or USB flash install. +After network boot or USB drive boot, this module runs automatic system installation with +predefined grub parameters. +The next possible option can be used. + +.. code-block:: yaml + + #cloud-config + vyos_install: + activated: true # true - enable installer, false - disable. Default: false + post_reboot: true # true - reboot after installation, false - do not reboot. Default: false + ci_disable: true # true - disable cloud-init after installation, false - do not disable. Default: false + boot_params: + console_type: serial # type of console: kvm, serial. Default: kvm + serial_console_num: 1 # serial console number. Default: 0 + serial_console_speed: 115200 # serial console speed. Default: 9600 + cmdline_extra: nosmt mitigations=off # add extra parameters for kernel cmdline + ************************* System Defaults/Fallbacks ************************* |