summaryrefslogtreecommitdiff
path: root/docs/commandtree
diff options
context:
space:
mode:
Diffstat (limited to 'docs/commandtree')
-rw-r--r--docs/commandtree/configmode.rst524
-rw-r--r--docs/commandtree/index.rst17
-rw-r--r--docs/commandtree/operationmode.rst444
3 files changed, 985 insertions, 0 deletions
diff --git a/docs/commandtree/configmode.rst b/docs/commandtree/configmode.rst
new file mode 100644
index 00000000..d4148c22
--- /dev/null
+++ b/docs/commandtree/configmode.rst
@@ -0,0 +1,524 @@
+.. _commandtree_configmode:
+
+Configuration mode
+------------------
+
+.. code-block:: none
+
+ confirm Confirm prior commit-confirm
+ comment Add comment to this configuration element
+ commit Commit the current set of changes
+ commit-confirm Commit the current set of changes with 'confirm' required
+ compare Compare configuration revisions
+ copy Copy a configuration element
+ delete Delete a configuration element
+ discard Discard uncommitted changes
+ edit Edit a sub-element
+ exit Exit from this configuration level
+ load Load configuration from a file and replace running configuration
+ loadkey Load user SSH key from a file
+ merge Load configuration from a file and merge running configuration
+ rename Rename a configuration element
+ rollback Rollback to a prior config revision (requires reboot)
+ run Run an operational-mode command
+ save Save configuration to a file
+ set Set the value of a parameter or create a new element
+ show Show the configuration (default values may be suppressed)
+
+
+Confirm
+^^^^^^^
+
+The ``confirm`` command confirms the prior ``commit-confirm``.
+
+Comment
+^^^^^^^
+
+The ``comment`` commands allow you to insert a comment above the current configuration section.
+The command cannot be used at the top of the configuration hierarchy, only on subsections. Comments needs to be commited, just like other config changes.
+
+To add a comment to a section, while being already at the proper section level:
+
+.. code-block:: none
+
+ [edit <section>]
+ vyos@vyos# comment "Type Comment Here"
+
+To add a comment directly to a section, from the top or a higher section:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# comment <section> "Type Comment Here"
+
+To remove a comment, add a blank comment to overwrite:
+
+.. code-block:: none
+
+ [edit <section>]
+ vyos@vyos# comment ""
+
+Examples
+********
+
+To add a comment to the "interfaces" section:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# edit interfaces
+ [edit interfaces]
+ vyos@vyos# comment "Here is a comment"
+ [edit interfaces]
+ vyos@vyos# commit
+
+The comment would then appear like this:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# show
+ /* Here is a comment */
+ interfaces {
+ ethernet eth0 {
+ [...]
+
+
+An important thing to note is that since the comment is added on top of the section, it will not appear if the ``show <section>`` command is used. With the above example, the ``show interfaces`` command would return starting after the "interfaces {" line, hiding the comment:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# show interfaces
+ ethernet eth0 {
+ [...]
+
+
+To add a comment to the interfaces section from the top:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# comment interfaces "test"
+
+
+The comment can be added to any node that already exists, even if it's multiple levels lower:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# comment interfaces ethernet eth0 vif 222 address "Far down comment"
+
+
+Commit
+^^^^^^
+
+The ``commit`` command commits the proposed changes to the configuration file.
+Every changes done in the configuration session is only applied when the configuration is committed. To view the changes that will be applied, use the show command.
+To discard the changes without committing, use the ``discard`` command. The ``commit`` command doesn't save the configuration, you need to manually use the ``save`` command.
+
+The confirm keyword can be added, see ``commit-confirm``. A comment can be entered, it will appear in the commit log.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# commit
+ Possible completions:
+ <Enter> Commit working configuration
+ comment Comment for commit log
+
+Commit-confirm
+^^^^^^^^^^^^^^
+
+The ``commit-confirm`` command commits the proposed changes to the configuration file and starts a timer.
+If the ``confirm`` command is not entered before the timer expiration, the configuration will be rolled back and VyOS will reboot.
+The default timer value is 10 minutes, but a custom value can be entered.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# commit-confirm
+ Possible completions:
+ <Enter> Commit, rollback/reboot in 10 minutes if no confirm
+ <N> Commit, rollback/reboot in N minutes if no confirm
+ comment Comment for commit log
+
+
+Compare
+^^^^^^^
+
+VyOS maintains backups of previous configurations. To compare configuration revisions in configuration mode, use the compare command:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# compare
+ Possible completions:
+ <Enter> Compare working & active configurations
+ saved Compare working & saved configurations
+ <N> Compare working with revision N
+ <N> <M> Compare revision N with M
+
+ Revisions:
+ 0 2019-03-20 20:57:22 root by boot-config-loader
+ 1 2019-03-15 20:00:04 root by boot-config-loader
+ 2 2019-03-05 01:58:39 vyos by cli
+ 3 2019-03-05 01:54:59 vyos by cli
+ 4 2019-03-05 01:53:08 vyos by cli
+ 5 2019-03-05 01:52:21 vyos by cli
+ 6 2019-02-24 21:01:24 root by boot-config-loader
+ 7 2019-02-21 22:00:12 vyos by cli
+ 8 2019-02-21 21:56:49 vyos by cli
+
+
+Copy
+^^^^
+
+The ``copy`` command allows you to copy a configuration object.
+
+Copy the configuration entrys from a firewall name WAN rule 1 to rule 2.
+
+.. code-block:: none
+
+ [edit firewall name WAN]
+ vyos@vyos# show
+ rule 1 {
+ action accept
+ source {
+ address 10.1.0.0/24
+ }
+ }
+ [edit firewall name WAN]
+ vyos@vyos# copy rule 1 to rule 2
+ [edit firewall name WAN]
+ vyos@vyos# show
+ rule 1 {
+ action accept
+ source {
+ address 10.1.0.0/24
+ }
+ }
+ +rule 2 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ +}
+
+Delete
+^^^^^^
+
+The ``delte`` command is to delete a configuration entry.
+
+This Example delete the hole ``service tftp-server`` section.
+
+.. code-block:: none
+
+ delete service tftp-server
+
+Discard
+^^^^^^^
+
+The ``discard`` command removes all pending configuration changes.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# discard
+
+ Changes have been discarded
+
+Edit
+^^^^
+
+The ``edit`` command allows you to navigate down into the configuration tree.
+To get back to an upper level, use the ``up`` command or use the ``top`` command to get back to the upper most level.
+The ``[edit]`` text displays where the user is located in the configuration tree.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# edit interfaces
+ [edit interfaces]
+ vyos@vyos# edit ethernet eth0
+ [edit interfaces ethernet eth0]
+
+Exit
+^^^^
+
+The ``exit`` command exits the current configuration mode. If the current configuration level isn't the top-most, then the configuration level is put back to the top-most level.
+If the configuration level is at the top-most level, then it exits the configuration mode and returns to operational mode.
+The ``exit`` command cannot be used if uncommitted changes exists in the configuration file. To exit with uncommitted changes, you either need to use the ``exit discard`` command or you need to commit the changes before exiting.
+The ``exit`` command doesn't save the configuration, only the ``save`` command does. A warning will be given when exiting with unsaved changes. Using the ``exit`` command in operational mode will logout the session.
+
+
+Exiting from a configuration level:
+
+
+.. code-block:: none
+
+ [edit interfaces ethernet eth0]
+ vyos@vyos# exit
+ [edit]
+ vyos@vyos#
+
+Exiting from configuration mode:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# exit
+ exit
+ vyos@vyos:~$
+
+Exiting from operational mode:
+
+.. code-block:: none
+
+ vyos@vyos:~$ exit
+ logout
+
+Error message when trying to exit with uncommitted changes:
+
+.. code-block:: none
+
+ vyos@vyos# exit
+ Cannot exit: configuration modified.
+ Use 'exit discard' to discard the changes and exit.
+ [edit]
+ vyos@vyos#
+
+
+Warning message when exiting with unsaved changes:
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# exit
+ Warning: configuration changes have not been saved.
+ exit
+ vyos@vyos:~$
+
+Load
+^^^^
+
+The ``load`` command load a configuration from a local or remote file. You have to be use ``commit`` to make the change active
+
+.. code-block:: none
+
+ <Enter> Load from system config file
+ <file> Load from file on local machine
+ scp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ sftp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ ftp://<user>:<passwd>@<host>/<file> Load from file on remote machine
+ http://<host>/<file> Load from file on remote machine
+ https://<host>/<file> Load from file on remote machine
+ tftp://<host>/<file> Load from file on remote machine
+
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# load
+ Loading configuration from '/config/config.boot'...
+
+ Load complete. Use 'commit' to make changes active.
+
+
+Loadkey
+^^^^^^^^
+
+Copies the content of a public key to the ~/.ssh/authorized_keys file.
+
+.. code-block:: none
+
+ loadkey <username> [tab]
+
+ <file> Load from file on local machine
+ scp://<user>@<host>/<file> Load from file on remote machine
+ sftp://<user>@<host>/<file> Load from file on remote machine
+ ftp://<user>@<host>/<file> Load from file on remote machine
+ http://<host>/<file> Load from file on remote machine
+ tftp://<host>/<file> Load from file on remote machine
+
+Merge
+^^^^^
+
+The ``merge`` command merge the config from a local or remote file with the running config.
+
+In the example below exist a ``default-firewall.config`` file with some common firewall rules you saved earlier.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# show firewall
+ Configuration under specified path is empty
+ [edit]
+ vyos@vyos# merge default-firewall.config
+ Loading configuration from '/config/default-firewall.config'...
+
+ Merge complete. Use 'commit' to make changes active.
+ [edit]
+ vyos@vyos#
+
+ vyos@vyos# show firewall
+ +all-ping enable
+ +broadcast-ping disable
+ +config-trap disable
+ +ipv6-receive-redirects disable
+ +ipv6-src-route disable
+ +ip-src-route disable
+ +log-martians enable
+ +name WAN {
+ + default-action drop
+ + rule 1 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ + }
+ + rule 2 {
+ + action accept
+ + source {
+ + address 10.1.0.0/24
+ + }
+ ......
+
+
+Rename
+^^^^^^
+
+The ``rename`` command allows you to rename or move a configuration object.
+
+See here how to move the configuration entrys from vlanid 3 to 2
+
+.. code-block:: none
+
+ [edit interfaces ethernet eth1]
+ vyos@vyos# show
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ vif 3 {
+ address 10.4.4.4/32
+ }
+ [edit interfaces ethernet eth1]
+ vyos@vyos# rename vif 3 to vif 2
+ [edit interfaces ethernet eth1]
+ vyos@vyos# show
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ +vif 2 {
+ + address 10.4.4.4/32
+ +}
+ -vif 3 {
+ - address 10.4.4.4/32
+ -}
+ [edit interfaces ethernet eth1]
+ vyos@vyos#
+
+
+Rollback
+^^^^^^^^
+
+You can ``rollback`` configuration using the rollback command, however this command will currently trigger a system reboot.
+Use the compare command to verify the configuration you want to rollback to.
+
+.. code-block:: none
+
+ vyos@vyos# compare 1
+ [edit system]
+ >host-name vyos-1
+ [edit]
+ vyos@vyos# rollback 1
+ Proceed with reboot? [confirm][y]
+
+ Broadcast message from root@vyos-1 (pts/0) (Tue Dec 17 21:07:45 2018):
+
+ The system is going down for reboot NOW!
+ [edit]
+ vyos@vyos#
+
+Run
+^^^
+
+The ``run`` command allows you to execute any operational mode commands without exiting the configuration session.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# run show interfaces
+ Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
+ Interface IP Address S/L Description
+ --------- ---------- --- -----------
+ eth0 10.1.1.1/24 u/u
+
+
+Save
+^^^^
+
+The ``save`` command saves the current configuration to non-volatile storage. VyOS also supports saving and loading configuration remotely using SCP, FTP, or TFTP.
+
+.. code-block:: none
+
+ <Enter> Save to system config file
+ <file> Save to file on local machine
+ scp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ sftp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ ftp://<user>:<passwd>@<host>/<file> Save to file on remote machine
+ tftp://<host>/<file> Save to file on remote machine
+
+Set
+^^^
+
+The ``set`` command create all configuration entrys
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# set protocols static route 0.0.0.0/0 next-hop 192.168.1.1
+
+Show
+^^^^
+
+The ``show`` command in the configuration mode displays the configuration and show uncommitted changes.
+
+Show the hole config, the address and description of eth1 is moving to vlan 2 if you commit the changes.
+
+.. code-block:: none
+
+ [edit]
+ vyos@vyos# show
+ interfaces {
+ dummy dum0 {
+ address 10.3.3.3/24
+ }
+ ethernet eth0 {
+ address dhcp
+ duplex auto
+ hw-id 08:00:27:2b:c0:0b
+ smp-affinity auto
+ speed auto
+ }
+ ethernet eth1 {
+ - address 10.1.1.1/32
+ - description "MGMT Interface"
+ duplex auto
+ hw-id 08:00:27:81:c6:59
+ smp-affinity auto
+ speed auto
+ + vif 2 {
+ + address 10.1.1.1/32
+ + description "MGMT Interface"
+ + }
+ }
+ loopback lo {
+ }
+ }
+ service {
+ ssh {
+ port 22
+ ...... \ No newline at end of file
diff --git a/docs/commandtree/index.rst b/docs/commandtree/index.rst
new file mode 100644
index 00000000..c3bca008
--- /dev/null
+++ b/docs/commandtree/index.rst
@@ -0,0 +1,17 @@
+.. _commandtree:
+
+Command tree
+============
+
+See the the full Command tree in Operational mode and Configuration mode
+
+
+
+.. toctree::
+ :maxdepth: 2
+ :hidden:
+
+
+ operationmode
+ configmode
+
diff --git a/docs/commandtree/operationmode.rst b/docs/commandtree/operationmode.rst
new file mode 100644
index 00000000..8092f248
--- /dev/null
+++ b/docs/commandtree/operationmode.rst
@@ -0,0 +1,444 @@
+.. _commandtree_operationmode:
+
+Operational mode
+----------------
+
+Operational mode allows for commands to perform operational system tasks and view system and service status.
+After this is the first view after the login.
+Please see :ref:`cli` for navigation in the CLI
+
+
+.. code-block:: none
+
+
+ vyos@vyos:~$ [tab]
+ Possible completions:
+ add Add an object to a service
+ clear Clear system information
+ clone Clone an object
+ configure Enter configure mode
+ connect Establish a connection
+ copy Copy an object
+ delete Delete an object
+ disconnect Take down a connection
+ force Force an operation
+ format Format a device
+ generate Generate an object
+ install Install a new system
+ monitor Monitor system information
+ ping Send IPv4 or IPv6 ICMP (Internet Control Message Protocol) echo requests
+ poweroff Poweroff the system
+ reboot Reboot the system
+ release Release specified variable
+ rename Rename an object
+ renew Renew specified variable
+ reset Reset a service
+ restart Restart a service
+ set Set operational options
+ show Show system information
+ telnet Telnet to a node
+ traceroute Track network path to node
+ update Update data for a service
+
+
+Add
+^^^
+
+.. code-block:: none
+
+ raid Add a RAID set element
+ system Add an item to a system facility
+
+Clear
+^^^^^
+
+.. code-block:: none
+
+ console Clear screen
+ firewall Clear firewall statistics
+ flow-accounting Clear flow accounting
+ interfaces Clear interface information
+ ip Clear Internet Protocol (IP) statistics or status
+ ipv6 Clear Internet Protocol (IPv6) statistics or status
+ nat Clear network address translation (NAT) tables
+ policy Clear policy statistics
+
+
+Clone
+^^^^^
+The ``clone`` command allows you to clone a configuration from a system image to another one, or from the running config to another system image.
+To clone the running config to a system image:
+
+.. code-block:: none
+
+ clone system config <system-image> from running
+
+To clone from system image A to system image B:
+
+.. code-block:: none
+
+ clone system config <system-image-B> from <system-image-A>
+
+
+Configure
+^^^^^^^^^
+
+The ``configure`` command allows you to enter configuration mode.
+
+.. code-block:: none
+
+ vyos@vyos:~$ configure
+ [edit]
+ vyos@vyos#
+
+
+Connect
+^^^^^^^
+
+The ``connect`` command allows you to bring up a connection oriented interface, like a pppoe interface.
+
+.. code-block:: none
+
+ connect interface <interface>
+
+Copy
+^^^^
+
+The ``copy`` command allows you to copy a file to your running config or over images.
+
+It can look like this example:
+
+.. code-block:: none
+
+ vyos@vyos:~$ copy file [tab]
+ Possible completions:
+ http://<user>:<passwd>@<host>/<file>
+ Copy files from specified source
+ scp://<user>:<passwd>@<host>/<file>
+ ftp://<user>:<passwd>@<host>/<file>
+ tftp://<host>/<file>
+ 1.2.0://config/
+ 1.2.0-rolling+201902251818://config/
+ 1.2.0-rolling+201902201040://config/
+ 1.2.0-rolling+201902080337://config/
+ 1.2.0-H4://config/
+ running://config/
+
+
+To copy from file A to file B:
+
+.. code-block:: none
+
+ copy <file A> to <file B>
+
+
+Delete
+^^^^^^
+
+.. code-block:: none
+
+ conntrack Delete Conntrack entries
+ file Delete files in a particular image
+ log Delete a log file
+ raid Remove a RAID set element
+ system Delete system objects
+
+
+Disconnect
+^^^^^^^^^^
+
+The ``disconnect`` command allows you to take down a connection oriented interface, like a pppoe interface.
+
+.. code-block:: none
+
+ disconnect interface <interface>
+
+Force
+^^^^^
+
+.. code-block:: none
+
+ arp Send gratuitous ARP request or reply
+ cluster Force a cluster state transition
+
+
+Format
+^^^^^^
+
+The ``format`` command allows you to format a disk the same way as another one.
+
+.. code-block:: none
+
+ format disk <target> like <source>
+
+Generate
+^^^^^^^^
+
+.. code-block:: none
+
+ openvpn OpenVPN key generation tool
+ ssh-server-key
+ Regenerate the host SSH keys and restart the SSH server
+ tech-support Generate tech-support archive
+ vpn VPN key generation utility
+ wireguard wireguard key generation utility
+
+Install
+^^^^^^^
+
+The ``install`` command allows you to install the system image on the disk.
+
+.. code-block:: none
+
+ install image
+
+
+Monitor
+^^^^^^^
+
+``monitor`` can be used to continually view what is happening on the router.
+
+.. code-block:: none
+
+ bandwidth Monitor interface bandwidth in real time
+ bandwidth-test
+ Initiate or wait for bandwidth test
+ cluster Monitor clustering service
+ command Monitor an operational mode command (refreshes every 2 seconds)
+ conntrack-sync
+ Monitor conntrack-sync
+ content-inspection
+ Monitor Content-Inspection
+ dhcp Monitor Dynamic Host Control Protocol (DHCP)
+ dns Monitor a Domain Name Service (DNS) daemon
+ firewall Monitor Firewall
+ https Monitor the Secure Hypertext Transfer Protocol (HTTPS) service
+ lldp Monitor Link Layer Discovery Protocol (LLDP) daemon
+ log Monitor last lines of messages file
+ nat Monitor network address translation (NAT)
+ openvpn Monitor OpenVPN
+ protocol Monitor routing protocols
+ snmp Monitor Simple Network Management Protocol (SNMP) daemon
+ stop-all Stop all current background monitoring processes
+ traceroute Monitor the path to a destination in realtime
+ traffic Monitor traffic dumps
+ vpn Monitor VPN
+ vrrp Monitor Virtual Router Redundancy Protocol (VRRP)
+ webproxy Monitor Webproxy service
+
+
+Ping
+^^^^
+
+The ``ping`` command allows you to send an ICMP-EchoRequest packet and display the ICMP-EchoReply received.
+
+.. code-block:: none
+
+ <hostname> Send Internet Control Message Protocol (ICMP) echo request
+ <x.x.x.x>
+ <h:h:h:h:h:h:h:h>
+
+
+Poweroff
+^^^^^^^^
+
+The ``poweroff`` command allows you to properly shut down the VyOS instance. Without any modifier, the command is executed immediately.
+
+.. code-block:: none
+
+ <Enter> Execute the current command
+ at Poweroff at a specific time
+ cancel Cancel a pending poweroff
+ in Poweroff in X minutes
+ now Poweroff the system without confirmation
+
+Reboot
+^^^^^^
+The ``reboot`` command allows you to properly restart the VyOS instance. Without any modifier, the command is executed immediately.
+
+.. code-block:: none
+
+ <Enter> Execute the current command
+ at Poweroff at a specific time
+ cancel Cancel a pending poweroff
+ in Poweroff in X minutes
+ now Poweroff the system without confirmation
+
+Release
+^^^^^^^
+
+The ``release`` command allows you to release a DHCP or DHCPv6 lease.
+
+.. code-block:: none
+
+ vyos@vyos:~$ release dhcp interface <int>
+ vyos@vyos:~$ release dhcpv6 interface <int>
+
+
+Rename
+^^^^^^
+
+The ``rename`` command allows you to rename a system image.
+
+.. code-block:: none
+
+ rename system image <currentname> <newname>
+
+
+Renew
+^^^^^
+
+The ``renew`` command allows you to renew a DHCP or DHCPv6 lease.
+
+.. code-block:: none
+
+ vyos@vyos:~$ renew dhcp interface <int>
+ vyos@vyos:~$ renew dhcpv6 interface <int>
+
+Reset
+^^^^^
+
+.. code-block:: none
+
+ conntrack Reset all currently tracked connections
+ conntrack-sync
+ Reset connection syncing parameters
+ dns Reset a DNS service state
+ firewall reset a firewall group
+ ip Reset Internet Protocol (IP) parameters
+ ipv6 Reset Internet Protocol version 6 (IPv6) parameters
+ nhrp Clear/Purge NHRP entries
+ openvpn Reset OpenVPN
+ terminal Reset terminal
+ vpn Reset Virtual Private Network (VPN) information
+
+Restart
+^^^^^^^
+
+.. code-block:: none
+
+ cluster Restart cluster node
+ conntrack-sync
+ Restart connection tracking synchronization service
+ dhcp Restart DHCP processes
+ dhcpv6 Restart DHCPv6 processes
+ dns Restart a DNS service
+ flow-accounting
+ Restart flow-accounting service
+ https Restart https server
+ vpn Restart IPsec VPN
+ vrrp Restart the VRRP (Virtual Router Redundancy Protocol) process
+ wan-load-balance
+ Restart WAN load balancing
+ webproxy Restart webproxy service
+
+Set
+^^^
+
+.. code-block:: none
+
+ <OPTION> Bash builtin set command
+ console Control console behaviors
+ date Set system date and time
+ system Set system operational parameters
+ terminal Control terminal behaviors
+
+Show
+^^^^
+
+.. code-block:: none
+
+ arp Show Address Resolution Protocol (ARP) information
+ bridge Show bridging information
+ cluster Show clustering information
+ configuration Show available saved configurations
+ conntrack Show conntrack entries in the conntrack table
+ conntrack-sync
+ Show connection syncing information
+ date Show system time and date
+ dhcp Show DHCP (Dynamic Host Configuration Protocol) information
+ dhcpv6 Show DHCPv6 (IPv6 Dynamic Host Configuration Protocol) information
+ disk Show status of disk device
+ dns Show DNS information
+ file Show files for a particular image
+ firewall Show firewall information
+ flow-accounting
+ Show flow accounting statistics
+ hardware Show system hardware details
+ history show command history
+ host Show host information
+ incoming Show ethernet input-policy information
+ interfaces Show network interface information
+ ip Show IPv4 routing information
+ ipv6 Show IPv6 routing information
+ license Show VyOS license information
+ lldp Show lldp
+ log Show contents of current master log file
+ login Show current login credentials
+ monitoring Show currently monitored services
+ nat Show Network Address Translation (NAT) information
+ nhrp Show NHRP info
+ ntp Show peer status of NTP daemon
+ openvpn Show OpenVPN information
+ policy Show policy information
+ poweroff Show scheduled poweroff
+ pppoe-server show pppoe-server status
+ queueing Show ethernet queueing information
+ raid Show statis of RAID set
+ reboot Show scheduled reboot
+ remote-config Show remote side config
+ route-map Show route-map information
+ snmp Show status of SNMP on localhost
+ system Show system information
+ system-integrity
+ checks the integrity of the system
+ table Show routing table
+ tech-support Show consolidated tech-support report (private information removed)
+ users Show user information
+ version Show system version information
+ vpn Show Virtual Private Network (VPN) information
+ vrrp Show VRRP (Virtual Router Redundancy Protocol) information
+ wan-load-balance
+ Show Wide Area Network (WAN) load-balancing information
+ webproxy Show webproxy information
+ wireguard Show wireguard properties
+ zone-policy Show summary of zone policy for a specific zone
+
+Telnet
+^^^^^^
+In the past the ``telnet`` command allowed you to connect remotely to another device using the telnet protocol.
+Telnet is unencrypted and should not use anymore. But its nice to test if an TCP Port to a host is open.
+
+
+.. code-block:: none
+
+ vyos@vyos:~$ telnet 192.168.1.3 443
+ Trying 192.168.1.3...
+ telnet: Unable to connect to remote host: Network is unreachable
+
+ vyos@vyos:~$ telnet 192.168.1.4 443
+ Trying 192.168.1.4...
+ Connected to 192.168.1.4.
+ Escape character is '^]'.
+
+Traceroute
+^^^^^^^^^^
+
+The ``traceroute`` command allows you to trace the path taken to a particular device.
+
+.. code-block:: none
+
+ <hostname> Track network path to specified node
+ <x.x.x.x>
+ <h:h:h:h:h:h:h:h>
+ ipv4 Track network path to <hostname|IPv4 address>
+ ipv6 Track network path to <hostname|IPv6 address>
+
+
+Update
+^^^^^^
+
+.. code-block:: none
+
+ dns Update DNS information
+ webproxy Update webproxy \ No newline at end of file
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 05:50:04 +0000