diff options
Diffstat (limited to 'docs/configexamples/lac-lns.rst')
| -rw-r--r-- | docs/configexamples/lac-lns.rst | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/docs/configexamples/lac-lns.rst b/docs/configexamples/lac-lns.rst new file mode 100644 index 00000000..b246c4d3 --- /dev/null +++ b/docs/configexamples/lac-lns.rst @@ -0,0 +1,169 @@ +:lastproofread: 2024-02-21 + +.. _examples-lac-lns: + +############### +PPPoE over L2TP +############### + +This document is to describe a basic setup using PPPoE over L2TP. +LAC and LNS are components of the broadband topology. +LAC - L2TP access concentrator +LNS - L2TP Network Server +LAC and LNS forms L2TP tunnel. LAC receives packets from PPPoE clients and +forward them to LNS. LNS is the termination point that comes from PPP packets +from the remote client. + +In this example we use VyOS 1.5 as LNS and Cisco IOS as LAC. +All users with domain **vyos.io** will be tunneled to LNS via L2TP. + +Network Topology +================ + +.. image:: /_static/images/lac-lns-diagram.jpg + :width: 60% + :align: center + :alt: Network Topology Diagram + +Configurations +============== + +LAC +--- + +.. code-block:: none + + aaa new-model + ! + aaa authentication ppp default local + ! + vpdn enable + vpdn aaa attribute nas-ip-address vpdn-nas + ! + vpdn-group LAC + request-dialin + protocol l2tp + domain vyos.io + initiate-to ip 192.168.139.100 + source-ip 192.168.139.101 + local name LAC + l2tp tunnel password 0 test123 + ! + bba-group pppoe MAIN-BBA + virtual-template 1 + ! + interface GigabitEthernet0/0 + description To LNS + ip address 192.168.139.101 255.255.255.0 + duplex auto + speed auto + media-type rj45 + ! + interface GigabitEthernet0/1 + description To PPPoE clients + no ip address + duplex auto + speed auto + media-type rj45 + pppoe enable group MAIN-BBA + ! + +LNS +--- + +.. code-block:: none + + set interfaces ethernet eth0 address '192.168.139.100/24' + set nat source rule 100 outbound-interface name 'eth0' + set nat source rule 100 source address '10.0.0.0/24' + set nat source rule 100 translation address 'masquerade' + set protocols static route 0.0.0.0/0 next-hop 192.168.139.2 + set vpn l2tp remote-access authentication mode 'radius' + set vpn l2tp remote-access authentication radius server 192.168.139.110 key 'radiustest' + set vpn l2tp remote-access client-ip-pool TEST-POOL range '10.0.0.2-10.0.0.100' + set vpn l2tp remote-access default-pool 'TEST-POOL' + set vpn l2tp remote-access gateway-address '10.0.0.1' + set vpn l2tp remote-access lns host-name 'LAC' + set vpn l2tp remote-access lns shared-secret 'test123' + set vpn l2tp remote-access name-server '8.8.8.8' + set vpn l2tp remote-access ppp-options disable-ccp + +.. note:: This setup requires the Compression Control Protocol (CCP) + being disabled, the command ``set vpn l2tp remote-access ppp-options disable-ccp`` + accomplishes that. + +Client +------ + +In this lab we use Windows PPPoE client. + +.. image:: /_static/images/lac-lns-winclient.jpg + :width: 100% + :align: center + :alt: Window PPPoE Client Configuration + +Monitoring +---------- + +Monitoring on LNS side + +.. code-block:: none + + vyos@vyos:~$ show l2tp-server sessions + ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes + --------+--------------+----------+-----+--------+-----------------+------------+--------+----------+-----------+---------- + l2tp0 | test@vyos.io | 10.0.0.2 | | | 192.168.139.101 | | active | 00:00:35 | 188.4 KiB | 9.3 MiB + +Monitoring on LAC side + +.. code-block:: none + + Router#show pppoe session + 1 session in FORWARDED (FWDED) State + 1 session total + Uniq ID PPPoE RemMAC Port VT VA State + SID LocMAC VA-st Type + 1 1 000c.290b.20a6 Gi0/1 1 N/A FWDED + 0c58.88ac.0001 + + Router#show l2tp + L2TP Tunnel and Session Information Total tunnels 1 sessions 1 + + LocTunID RemTunID Remote Name State Remote Address Sessn L2TP Class/ + Count VPDN Group + 23238 2640 LAC est 192.168.139.100 1 LAC + + LocID RemID TunID Username, Intf/ State Last Chg Uniq ID + Vcid, Circuit + 25641 25822 23238 test@vyos.io, Gi0/1 est 00:05:36 1 + +Monitoring on RADIUS Server side + +.. code-block:: none + + root@Radius:~# cat /var/log/freeradius/radacct/192.168.139.100/detail-20240221 + Wed Feb 21 13:37:17 2024 + User-Name = "test@vyos.io" + NAS-Port = 0 + NAS-Port-Id = "l2tp0" + NAS-Port-Type = Virtual + Service-Type = Framed-User + Framed-Protocol = PPP + Calling-Station-Id = "192.168.139.101" + Called-Station-Id = "192.168.139.100" + Acct-Status-Type = Start + Acct-Authentic = RADIUS + Acct-Session-Id = "45c731e169d9a4f1" + Acct-Session-Time = 0 + Acct-Input-Octets = 0 + Acct-Output-Octets = 0 + Acct-Input-Packets = 0 + Acct-Output-Packets = 0 + Acct-Input-Gigawords = 0 + Acct-Output-Gigawords = 0 + Framed-IP-Address = 10.0.0.2 + NAS-IP-Address = 192.168.139.100 + Event-Timestamp = "Feb 21 2024 13:37:17 UTC" + Tmp-String-9 = "ai:" + Acct-Unique-Session-Id = "ea6a1089816f19c0d0f1819bc61c3318" + Timestamp = 1708522637 |