diff options
Diffstat (limited to 'docs/configexamples/tunnelbroker-ipv6.rst')
| -rw-r--r-- | docs/configexamples/tunnelbroker-ipv6.rst | 13 |
1 files changed, 11 insertions, 2 deletions
diff --git a/docs/configexamples/tunnelbroker-ipv6.rst b/docs/configexamples/tunnelbroker-ipv6.rst index 868b225f..b6f1cc07 100644 --- a/docs/configexamples/tunnelbroker-ipv6.rst +++ b/docs/configexamples/tunnelbroker-ipv6.rst @@ -1,5 +1,7 @@ .. _examples-tunnelbroker-ipv6: +.. stop_vyoslinter + ####################### Tunnelbroker.net (IPv6) ####################### @@ -110,7 +112,9 @@ should be replaced with the information from your `Routed /64` tunnel): set service router-advert interface eth1 name-server '2001:4860:4860::8844' set service router-advert interface eth1 prefix 2001:470:xxxx:xxxx::/64 -Please note, 'autonomous-flag' and 'on-link-flag' are enabled by default, 'valid-lifetime' and 'preferred-lifetime' are set to default values of 30 days and 4 hours respectively. +Please note, 'autonomous-flag' and 'on-link-flag' are enabled by default, +'valid-lifetime' and 'preferred-lifetime' are set to default values of +30 days and 4 hours respectively. This accomplishes a few things: @@ -155,7 +159,9 @@ So, when your LAN is eth1, your DMZ is eth2, your cameras live on eth3, etc: set service router-advert interface eth3 name-server '2001:4860:4860::8844' set service router-advert interface eth3 prefix 2001:470:xxxx:3::/64 -Please note, 'autonomous-flag' and 'on-link-flag' are enabled by default, 'valid-lifetime' and 'preferred-lifetime' are set to default values of 30 days and 4 hours respectively. +Please note, 'autonomous-flag' and 'on-link-flag' are enabled by default, +'valid-lifetime' and 'preferred-lifetime' are set to default values of +30 days and 4 hours respectively. Firewall ======== @@ -167,3 +173,6 @@ NAME`. Similarly, to attach the firewall, you would use `set interfaces ethernet eth0 firewall in ipv6-name` or `set zone-policy zone LOCAL from WAN firewall ipv6-name`. + + +.. start_vyoslinter |