diff options
Diffstat (limited to 'docs/configuration/firewall/index.rst')
| -rw-r--r-- | docs/configuration/firewall/index.rst | 953 |
1 files changed, 5 insertions, 948 deletions
diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index 56477dfc..dfafa606 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -1,953 +1,10 @@ -:lastproofread: 2021-06-29 - -.. _firewall: - ######## Firewall ######## -******** -Overview -******** - -VyOS makes use of Linux `netfilter <https://netfilter.org/>`_ for packet -filtering. - -The firewall supports the creation of groups for ports, addresses, and -networks (implemented using netfilter ipset) and the option of interface -or zone based firewall policy. - -.. note:: **Important note on usage of terms:** - The firewall makes use of the terms `in`, `out`, and `local` - for firewall policy. Users experienced with netfilter often confuse - `in` to be a reference to the `INPUT` chain, and `out` the `OUTPUT` - chain from netfilter. This is not the case. These instead indicate - the use of the `FORWARD` chain and either the input or output - interface. The `INPUT` chain, which is used for local traffic to the - OS, is a reference to as `local` with respect to its input interface. - - -*************** -Global settings -*************** - -Some firewall settings are global and have an affect on the whole system. - -.. cfgcmd:: set firewall all-ping [enable | disable] - - By default, when VyOS receives an ICMP echo request packet destined for - itself, it will answer with an ICMP echo reply, unless you avoid it - through its firewall. - - With the firewall you can set rules to accept, drop or reject ICMP in, - out or local traffic. You can also use the general **firewall all-ping** - command. This command affects only to LOCAL (packets destined for your - VyOS system), not to IN or OUT traffic. - - .. note:: **firewall all-ping** affects only to LOCAL and it always - behaves in the most restrictive way - - .. code-block:: none - - set firewall all-ping enable - - When the command above is set, VyOS will answer every ICMP echo request - addressed to itself, but that will only happen if no other rule is - applied dropping or rejecting local echo requests. In case of conflict, - VyOS will not answer ICMP echo requests. - - .. code-block:: none - - set firewall all-ping disable - - When the command above is set, VyOS will answer no ICMP echo request - addressed to itself at all, no matter where it comes from or whether - more specific rules are being applied to accept them. - -.. cfgcmd:: set firewall broadcast-ping [enable | disable] - - This setting enable or disable the response of icmp broadcast - messages. The following system parameter will be altered: - - * ``net.ipv4.icmp_echo_ignore_broadcasts`` - -.. cfgcmd:: set firewall ip-src-route [enable | disable] -.. cfgcmd:: set firewall ipv6-src-route [enable | disable] - - This setting handle if VyOS accept packets with a source route - option. The following system parameter will be altered: - - * ``net.ipv4.conf.all.accept_source_route`` - * ``net.ipv6.conf.all.accept_source_route`` - -.. cfgcmd:: set firewall receive-redirects [enable | disable] -.. cfgcmd:: set firewall ipv6-receive-redirects [enable | disable] - - enable or disable of ICMPv4 or ICMPv6 redirect messages accepted - by VyOS. The following system parameter will be altered: - - * ``net.ipv4.conf.all.accept_redirects`` - * ``net.ipv6.conf.all.accept_redirects`` - -.. cfgcmd:: set firewall send-redirects [enable | disable] - - enable or disable ICMPv4 redirect messages send by VyOS - The following system parameter will be altered: - - * ``net.ipv4.conf.all.send_redirects`` - -.. cfgcmd:: set firewall log-martians [enable | disable] - - enable or disable the logging of martian IPv4 packets. - The following system parameter will be altered: - - * ``net.ipv4.conf.all.log_martians`` - -.. cfgcmd:: set firewall source-validation [strict | loose | disable] - - Set the IPv4 source validation mode. - The following system parameter will be altered: - - * ``net.ipv4.conf.all.rp_filter`` - -.. cfgcmd:: set firewall syn-cookies [enable | disable] - - Enable or Disable if VyOS use IPv4 TCP SYN Cookies. - The following system parameter will be altered: - - * ``net.ipv4.tcp_syncookies`` - -.. cfgcmd:: set firewall twa-hazards-protection [enable | disable] - - Enable or Disable VyOS to be :rfc:`1337` conform. - The following system parameter will be altered: - - * ``net.ipv4.tcp_rfc1337`` - -.. cfgcmd:: set firewall state-policy established action [accept | drop | - reject] - -.. cfgcmd:: set firewall state-policy established log enable - - Set the global setting for an established connection. - -.. cfgcmd:: set firewall state-policy invalid action [accept | drop | reject] - -.. cfgcmd:: set firewall state-policy invalid log enable - - Set the global setting for invalid packets. - -.. cfgcmd:: set firewall state-policy related action [accept | drop | reject] - -.. cfgcmd:: set firewall state-policy related log enable - - Set the global setting for related connections. - - -****** -Groups -****** - -Firewall groups represent collections of IP addresses, networks, or -ports. Once created, a group can be referenced by firewall rules as -either a source or destination. Members can be added or removed from a -group without changes to, or the need to reload, individual firewall -rules. - -Groups need to have unique names. Even though some contain IPv4 -addresses and others contain IPv6 addresses, they still need to have -unique names, so you may want to append "-v4" or "-v6" to your group -names. - - -Address Groups -============== - -In an **address group** a single IP address or IP address ranges are -defined. - -.. cfgcmd:: set firewall group address-group <name> address [address | - address range] -.. cfgcmd:: set firewall group ipv6-address-group <name> address <address> - - Define a IPv4 or a IPv6 address group - - .. code-block:: none - - set firewall group address-group ADR-INSIDE-v4 address 192.168.0.1 - set firewall group address-group ADR-INSIDE-v4 address 10.0.0.1-10.0.0.8 - set firewall group ipv6-address-group ADR-INSIDE-v6 address 2001:db8::1 - -.. cfgcmd:: set firewall group address-group <name> description <text> -.. cfgcmd:: set firewall group ipv6-address-group <name> description <text> - - Provide a IPv4 or IPv6 address group description - - -Network Groups -============== - -While **network groups** accept IP networks in CIDR notation, specific -IP addresses can be added as a 32-bit prefix. If you foresee the need -to add a mix of addresses and networks, the network group is -recommended. - -.. cfgcmd:: set firewall group network-group <name> network <CIDR> -.. cfgcmd:: set firewall group ipv6-network-group <name> network <CIDR> - - Define a IPv4 or IPv6 Network group. - - .. code-block:: none - - set firewall group network-group NET-INSIDE-v4 network 192.168.0.0/24 - set firewall group network-group NET-INSIDE-v4 network 192.168.1.0/24 - set firewall group ipv6-network-group NET-INSIDE-v6 network 2001:db8::/64 - -.. cfgcmd:: set firewall group network-group <name> description <text> -.. cfgcmd:: set firewall group ipv6-network-group <name> description <text> - - Provide a IPv4 or IPv6 network group description. - - -Port Groups -=========== - -A **port group** represents only port numbers, not the protocol. Port -groups can be referenced for either TCP or UDP. It is recommended that -TCP and UDP groups are created separately to avoid accidentally -filtering unnecessary ports. Ranges of ports can be specified by using -`-`. - -.. cfgcmd:: set firewall group port-group <name> port - [portname | portnumber | startport-endport] - - Define a port group. A port name can be any name defined in - /etc/services. e.g.: http - - .. code-block:: none - - set firewall group port-group PORT-TCP-SERVER1 port http - set firewall group port-group PORT-TCP-SERVER1 port 443 - set firewall group port-group PORT-TCP-SERVER1 port 5000-5010 - -.. cfgcmd:: set firewall group port-group <name> description <text> - - Provide a port group description. - - -********* -Rule-Sets -********* - -A rule-set is a named collection of firewall rules that can be applied -to an interface or a zone. Each rule is numbered, has an action to apply -if the rule is matched, and the ability to specify the criteria to -match. Data packets go through the rules from 1 - 999999, at the first match -the action of the rule will be executed. - -.. cfgcmd:: set firewall name <name> description <text> -.. cfgcmd:: set firewall ipv6-name <name> description <text> - - Provide a rule-set description. - -.. cfgcmd:: set firewall name <name> default-action [drop | reject | accept] -.. cfgcmd:: set firewall ipv6-name <name> default-action [drop | reject | - accept] - - This set the default action of the rule-set if no rule matched a packet - criteria. - -.. cfgcmd:: set firewall name <name> enable-default-log -.. cfgcmd:: set firewall ipv6-name <name> enable-default-log - - Use this command to enable the logging of the default action. - -.. cfgcmd:: set firewall name <name> rule <1-999999> action [drop | reject | - accept] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> action [drop | - reject | accept] - - This required setting defines the action of the current rule. - -.. cfgcmd:: set firewall name <name> rule <1-999999> description <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> description <text> - - Provide a description for each rule. - -.. cfgcmd:: set firewall name <name> rule <1-999999> log [disable | enable] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log [disable | - enable] - - Enable or disable logging for the matched packet. - -.. cfgcmd:: set firewall name <name> rule <1-999999> log-level [emerg | - alert | crit | err | warn | notice | info | debug] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log-level [emerg | - alert | crit | err | warn | notice | info | debug] - - Define log-level. Only applicable if rule log is enable. - -.. cfgcmd:: set firewall name <name> rule <1-999999> disable -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> disable - - If you want to disable a rule but let it in the configuration. - -Matching criteria -================= - -There are a lot of matching criteria against which the package can be tested. - -.. cfgcmd:: set firewall name <name> rule <1-999999> connection-status nat - [destination | source] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> connection-status - nat [destination | source] - - Match criteria based on nat connection status. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source address - [address | addressrange | CIDR] -.. cfgcmd:: set firewall name <name> rule <1-999999> destination address - [address | addressrange | CIDR] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source address - [address | addressrange | CIDR] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination address - [address | addressrange | CIDR] - - This is similar to the network groups part, but here you are able to negate - the matching addresses. - - .. code-block:: none - - set firewall name WAN-IN-v4 rule 100 source address 192.0.2.10-192.0.2.11 - # with a '!' the rule match everything except the specified subnet - set firewall name WAN-IN-v4 rule 101 source address !203.0.113.0/24 - set firewall ipv6-name WAN-IN-v6 rule 100 source address 2001:db8::202 - -.. cfgcmd:: set firewall name <name> rule <1-999999> source geoip country-code - <country> -.. cfgcmd:: set firewall name <name> rule <1-999999> source geoip inverse-match -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source geoip - country-code <country> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source geoip - inverse-match -.. cfgcmd:: set firewall name <name> rule <1-999999> destination geoip - country-code <country> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination geoip - inverse-match -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination geoip - country-code <country> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination geoip - inverse-match - -Match IP addresses based on its geolocation. -More info: `geoip matching -<https://wiki.nftables.org/wiki-nftables/index.php/GeoIP_matching>`_. - -Use inverse-match to match anything except the given country-codes. - -Data is provided by DB-IP.com under CC-BY-4.0 license. Attribution required, -permits redistribution so we can include a database in images(~3MB -compressed). Includes cron script (manually callable by op-mode update -geoip) to keep database and rules updated. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source mac-address - <mac-address> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source mac-address - <mac-address> - - Only in the source criteria, you can specify a mac-address. - - .. code-block:: none - - set firewall name LAN-IN-v4 rule 100 source mac-address 00:53:00:11:22:33 - set firewall name LAN-IN-v4 rule 101 source mac-address !00:53:00:aa:12:34 - -.. cfgcmd:: set firewall name <name> rule <1-999999> source port - [1-65535 | portname | start-end] -.. cfgcmd:: set firewall name <name> rule <1-999999> destination port - [1-65535 | portname | start-end] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source port - [1-65535 | portname | start-end] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination port - [1-65535 | portname | start-end] - - A port can be set with a port number or a name which is here - defined: ``/etc/services``. - - .. code-block:: none - - set firewall name WAN-IN-v4 rule 10 source port '22' - set firewall name WAN-IN-v4 rule 11 source port '!http' - set firewall name WAN-IN-v4 rule 12 source port 'https' - - Multiple source ports can be specified as a comma-separated list. - The whole list can also be "negated" using '!'. For example: - - .. code-block:: none - - set firewall ipv6-name WAN-IN-v6 rule 10 source port '!22,https,3333-3338' - -.. cfgcmd:: set firewall name <name> rule <1-999999> source group - address-group <name | !name> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination group - address-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - address-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - address-group <name | !name> - - Use a specific address-group. Prepend character '!' for inverted matching - criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source group - network-group <name | !name> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination group - network-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - network-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - network-group <name | !name> - - Use a specific network-group. Prepend character '!' for inverted matching - criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source group - port-group <name | !name> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination group - port-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - port-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - port-group <name | !name> - - Use a specific port-group. Prepend character '!' for inverted matching - criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source group - domain-group <name | !name> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination group - domain-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - domain-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - domain-group <name | !name> - - Use a specific domain-group. Prepend character '!' for inverted matching - criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> source group - mac-group <name | !name> -.. cfgcmd:: set firewall name <name> rule <1-999999> destination group - mac-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - mac-group <name | !name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - mac-group <name | !name> - - Use a specific mac-group. Prepend character '!' for inverted matching - criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> fragment [match-frag | - match-non-frag] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> fragment [match-frag - | match-non-frag] - - Match based on fragment criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> icmp [code | type] - <0-255> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> icmpv6 [code | type] - <0-255> - - Match based on icmp|icmpv6 code and type. - -.. cfgcmd:: set firewall name <name> rule <1-999999> icmp type-name <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> icmpv6 type-name - <text> - - Match based on icmp|icmpv6 type-name criteria. Use tab for information - about what **type-name** criteria are supported. - -.. cfgcmd:: set firewall name <name> rule <1-999999> ipsec [match-ipsec - | match-none] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> ipsec [match-ipsec - | match-none] - - Match based on ipsec criteria. - -.. cfgcmd:: set firewall name <name> rule <1-999999> limit burst - <0-4294967295> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> limit burst - <0-4294967295> - - Match based on the maximum number of packets to allow in excess of rate. - -.. cfgcmd:: set firewall name <name> rule <1-999999> limit rate - <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> limit rate - <text> - - Match based on the maximum average rate, specified as **integer/unit**. - For example **5/minutes** - -.. cfgcmd:: set firewall name <name> rule <1-999999> packet-length - <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> packet-length - <text> -.. cfgcmd:: set firewall name <name> rule <1-999999> packet-length-exclude - <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> packet-length-exclude - <text> - - Match based on packet length criteria. Multiple values from 1 to 65535 - and ranges are supported. - -.. cfgcmd:: set firewall name <name> rule <1-999999> protocol [<text> | - <0-255> | all | tcp_udp] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> protocol [<text> | - <0-255> | all | tcp_udp] - - Match a protocol criteria. A protocol number or a name which is here - defined: ``/etc/protocols``. - Special names are ``all`` for all protocols and ``tcp_udp`` for tcp and udp - based packets. The ``!`` negate the selected protocol. - - .. code-block:: none - - set firewall name WAN-IN-v4 rule 10 protocol tcp_udp - set firewall name WAN-IN-v4 rule 11 protocol !tcp_udp - set firewall ipv6-name WAN-IN-v6 rule 10 protocol tcp - -.. cfgcmd:: set firewall name <name> rule <1-999999> recent count <1-255> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent count <1-255> -.. cfgcmd:: set firewall name <name> rule <1-999999> recent time - [second | minute | hour] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent time - [second | minute | hour] - - Match bases on recently seen sources. - -.. cfgcmd:: set firewall name <name> rule <1-999999> tcp flags <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> tcp flags <text> - - Allowed values fpr TCP flags: ``SYN``, ``ACK``, ``FIN``, ``RST``, ``URG``, - ``PSH``, ``ALL`` When specifying more than one flag, flags should be comma - separated. The ``!`` negate the selected protocol. - - .. code-block:: none - - set firewall name WAN-IN-v4 rule 10 tcp flags 'ACK' - set firewall name WAN-IN-v4 rule 12 tcp flags 'SYN' - set firewall name WAN-IN-v4 rule 13 tcp flags 'SYN,!ACK,!FIN,!RST' - -.. cfgcmd:: set firewall name <name> rule <1-999999> state [established | - invalid | new | related] [enable | disable] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> state [established | - invalid | new | related] [enable | disable] - - Match against the state of a packet. - -.. cfgcmd:: set firewall name <name> rule <1-999999> time startdate <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> time startdate <text> -.. cfgcmd:: set firewall name <name> rule <1-999999> time starttime <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> time starttime <text> -.. cfgcmd:: set firewall name <name> rule <1-999999> time stopdate <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> time stopdate <text> -.. cfgcmd:: set firewall name <name> rule <1-999999> time stoptime <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> time stoptime <text> -.. cfgcmd:: set firewall name <name> rule <1-999999> time weekdays <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> time weekdays <text> - - Time to match the defined rule. - -.. cfgcmd:: set firewall name <name> rule <1-999999> ttl <eq | gt | lt> <0-255> - - Match time to live parameter, where 'eq' stands for 'equal'; 'gt' stands for - 'greater than', and 'lt' stands for 'less than'. - -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> hop-limit <eq | gt | - lt> <0-255> - - Match hop-limit parameter, where 'eq' stands for 'equal'; 'gt' stands for - 'greater than', and 'lt' stands for 'less than'. - -.. cfgcmd:: set firewall name <name> rule <1-999999> recent count <1-255> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent count <1-255> -.. cfgcmd:: set firewall name <name> rule <1-999999> recent time <second | - minute | hour> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent time <second | - minute | hour> - - Match when 'count' amount of connections are seen within 'time'. These - matching criteria can be used to block brute-force attempts. - -*********************************** -Applying a Rule-Set to an Interface -*********************************** - -A Rule-Set can be applied to every interface: - -* ``in``: Ruleset for forwarded packets on an inbound interface -* ``out``: Ruleset for forwarded packets on an outbound interface -* ``local``: Ruleset for packets destined for this router - -.. cfgcmd:: set interface ethernet <ethN> firewall [in | out | local] - [name | ipv6-name] <rule-set> - - Here are some examples for applying a rule-set to an interface - - .. code-block:: none - - set interface ethernet eth1 vif 100 firewall in name LANv4-IN - set interface ethernet eth1 vif 100 firewall out name LANv4-OUT - set interface bonding bond0 firewall in name LANv4-IN - set interfaces openvpn vtun1 firewall in name Lanv4-IN - - .. note:: - As you can see in the example here, you can assign the same rule-set to - several interfaces. An interface can only have one rule-set per chain. - - -************************** -Zone-based Firewall Policy -************************** - -As an alternative to applying policy to an interface directly, a -zone-based firewall can be created to simplify configuration when -multiple interfaces belong to the same security zone. Instead of -applying rule-sets to interfaces, they are applied to source -zone-destination zone pairs. - -An basic introduction to zone-based firewalls can be found `here -<https://support.vyos.io/en/kb/articles/a-primer-to-zone-based-firewall>`_, -and an example at :ref:`examples-zone-policy`. - -Define a Zone -============= - -To define a zone setup either one with interfaces or a local zone. - -.. cfgcmd:: set zone-policy zone <name> interface <interfacenames> - - Set interfaces to a zone. A zone can have multiple interfaces. - But an interface can only be a member in one zone. - -.. cfgcmd:: set zone-policy zone <name> local-zone - - Define the zone as a local zone. A local zone has no interfaces and - will be applied to the router itself. - -.. cfgcmd:: set zone-policy zone <name> default-action [drop | reject] - - Change the default-action with this setting. - -.. cfgcmd:: set zone-policy zone <name> description - - Set a meaningful description. - - -Applying a Rule-Set to a Zone -============================= - -Before you are able to apply a rule-set to a zone you have to create the zones -first. - -It helps to think of the syntax as: (see below). The 'rule-set' should be -written from the perspective of: *Source Zone*-to->*Destination Zone* - -.. cfgcmd:: set zone-policy zone <Destination Zone> from <Source Zone> - firewall name <rule-set> - -.. cfgcmd:: set zone-policy zone <name> from <name> firewall name - <rule-set> -.. cfgcmd:: set zone-policy zone <name> from <name> firewall ipv6-name - <rule-set> - - You apply a rule-set always to a zone from an other zone, it is recommended - to create one rule-set for each zone pair. - - .. code-block:: none - - set zone-policy zone DMZ from LAN firewall name LANv4-to-DMZv4 - set zone-policy zone LAN from DMZ firewall name DMZv4-to-LANv4 - - -*********************** -Operation-mode Firewall -*********************** - -Rule-set overview -================= - -.. opcmd:: show firewall - - This will show you a basic firewall overview - - .. code-block:: none - - vyos@vyos:~$ show firewall - - ------------------------ - Firewall Global Settings - ------------------------ - - Firewall state-policy for all IPv4 and Ipv6 traffic - - state action log - ----- ------ --- - invalid accept disabled - established accept disabled - related accept disabled - - ----------------------------- - Rulesets Information - ----------------------------- - -------------------------------------------------------------------------- - IPv4 Firewall "DMZv4-1-IN": - - Active on (eth0,IN) - - rule action proto packets bytes - ---- ------ ----- ------- ----- - 10 accept icmp 0 0 - condition - saddr 10.1.0.0/24 daddr 0.0.0.0/0 LOG enabled - - 10000 drop all 0 0 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 LOG enabled - - -------------------------------------------------------------------------- - IPv4 Firewall "DMZv4-1-OUT": - - Active on (eth0,OUT) - - rule action proto packets bytes - ---- ------ ----- ------- ----- - 10 accept tcp_udp 1 60 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 match-DST-PORT-GROUP DMZ-Ports /* - DMZv4-1-OUT-10 */LOG enabled - - 11 accept icmp 1 84 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 /* DMZv4-1-OUT-11 */LOG enabled - - 10000 drop all 6 360 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 LOG enabled - - -------------------------------------------------------------------------- - IPv4 Firewall "LANv4-IN": - - Inactive - Not applied to any interfaces or zones. - - rule action proto packets bytes - ---- ------ ----- ------- ----- - 10 accept all 0 0 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 /* LANv4-IN-10 */ - - 10000 drop all 0 0 - condition - saddr 0.0.0.0/0 daddr 0.0.0.0/0 - -.. opcmd:: show firewall summary - - This will show you a summary of rule-sets and groups - - .. code-block:: none - - vyos@vyos:~$ show firewall summary - - ------------------------ - Firewall Global Settings - ------------------------ - - Firewall state-policy for all IPv4 and Ipv6 traffic - - state action log - ----- ------ --- - invalid accept disabled - related accept disabled - established accept disabled - - ------------------------ - Firewall Rulesets - ------------------------ - - IPv4 name: - - Rule-set name Description References - ------------- ----------- ---------- - DMZv4-1-OUT (eth0,OUT) - DMZv4-1-IN (eth0,IN) - - ------------------------ - Firewall Groups - ------------------------ - - Port Groups: - - Group name Description References - ---------- ----------- ---------- - DMZ-Ports DMZv4-1-OUT-10-destination - - Network Groups: - - Group name Description References - ---------- ----------- ---------- - LANv4 LANv4-IN-10-source, - DMZv4-1-OUT-10-source, - DMZv4-1-OUT-11-source - -.. opcmd:: show firewall statistics - - This will show you a statistic of all rule-sets since the last boot. - -.. opcmd:: show firewall [name | ipv6name] <name> rule <1-999999> - - This command will give an overview of a rule in a single rule-set - -.. opcmd:: show firewall group <name> - - Overview of defined groups. You see the type, the members, and where the - group is used. - - .. code-block:: none - - vyos@vyos:~$ show firewall group DMZ-Ports - Name : DMZ-Ports - Type : port - References : none - Members : - 80 - 443 - 8080 - 8443 - - vyos@vyos:~$ show firewall group LANv4 - Name : LANv4 - Type : network - References : LANv4-IN-10-source - Members : - 10.10.0.0/16 - -.. opcmd:: show firewall [name | ipv6name] <name> - - This command will give an overview of a single rule-set. - -.. opcmd:: show firewall [name | ipv6name] <name> statistics - - This will show you a rule-set statistic since the last boot. - -.. opcmd:: show firewall [name | ipv6name] <name> rule <1-999999> - - This command will give an overview of a rule in a single rule-set. - - -Zone-Policy Overview -==================== - -.. opcmd:: show zone-policy zone <name> - - Use this command to get an overview of a zone. - - .. code-block:: none - - vyos@vyos:~$ show zone-policy zone DMZ - ------------------- - Name: DMZ - - Interfaces: eth0 eth1 - - From Zone: - name firewall - ---- -------- - LAN DMZv4-1-OUT - - -Show Firewall log -================= - -.. opcmd:: show log firewall [name | ipv6name] <name> - - Show the logs of a specific Rule-Set. - -.. note:: - At the moment it not possible to look at the whole firewall log with VyOS - operational commands. All logs will save to ``/var/logs/messages``. - For example: ``grep '10.10.0.10' /var/log/messages`` - - - -Example Partial Config -====================== - -.. code-block:: none - - firewall { - all-ping enable - broadcast-ping disable - config-trap disable - group { - network-group BAD-NETWORKS { - network 198.51.100.0/24 - network 203.0.113.0/24 - } - network-group GOOD-NETWORKS { - network 192.0.2.0/24 - } - port-group BAD-PORTS { - port 65535 - } - } - name FROM-INTERNET { - default-action accept - description "From the Internet" - rule 10 { - action accept - description "Authorized Networks" - protocol all - source { - group { - network-group GOOD-NETWORKS - } - } - } - rule 11 { - action drop - description "Bad Networks" - protocol all - source { - group { - network-group BAD-NETWORKS - } - } - } - rule 30 { - action drop - description "BAD PORTS" - destination { - group { - port-group BAD-PORTS - } - } - log enable - protocol all - } - } - } - interfaces { - ethernet eth1 { - address dhcp - description OUTSIDE - duplex auto - firewall { - in { - name FROM-INTERNET - } - } - } - } - - -Update geoip database -===================== - -.. opcmd:: update geoip +.. toctree:: + :maxdepth: 1 + :includehidden: - Command used to update GeoIP database and firewall sets. + general + zone |