diff options
Diffstat (limited to 'docs/configuration/firewall/index.rst')
| -rw-r--r-- | docs/configuration/firewall/index.rst | 102 |
1 files changed, 83 insertions, 19 deletions
diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index 55881b1b..a36877b7 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -264,7 +264,7 @@ the action of the rule will be executed. .. cfgcmd:: set firewall name <name> rule <1-999999> action [drop | reject | accept] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> action [drop | +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> action [drop | reject | accept] This required setting defines the action of the current rule. @@ -275,11 +275,18 @@ the action of the rule will be executed. Provide a description for each rule. .. cfgcmd:: set firewall name <name> rule <1-999999> log [disable | enable] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log [disable | +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log [disable | enable] Enable or disable logging for the matched packet. +.. cfgcmd:: set firewall name <name> rule <1-999999> log-level [emerg | + alert | crit | err | warn | notice | info | debug] +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log-level [emerg | + alert | crit | err | warn | notice | info | debug] + + Define log-level. Only applicable if rule log is enable. + .. cfgcmd:: set firewall name <name> rule <1-999999> disable .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> disable @@ -316,6 +323,32 @@ There are a lot of matching criteria against which the package can be tested. set firewall name WAN-IN-v4 rule 101 source address !203.0.113.0/24 set firewall ipv6-name WAN-IN-v6 rule 100 source address 2001:db8::202 +.. cfgcmd:: set firewall name <name> rule <1-999999> source geoip country-code + <country> +.. cfgcmd:: set firewall name <name> rule <1-999999> source geoip inverse-match +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source geoip + country-code <country> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source geoip + inverse-match +.. cfgcmd:: set firewall name <name> rule <1-999999> destination geoip + country-code <country> +.. cfgcmd:: set firewall name <name> rule <1-999999> destination geoip + inverse-match +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination geoip + country-code <country> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination geoip + inverse-match + +Match IP addresses based on its geolocation. +More info: `geoip matching +<https://wiki.nftables.org/wiki-nftables/index.php/GeoIP_matching>`_. + +Use inverse-match to match anything except the given country-codes. + +Data is provided by DB-IP.com under CC-BY-4.0 license. Attribution required, +permits redistribution so we can include a database in images(~3MB +compressed). Includes cron script (manually callable by op-mode update +geoip) to keep database and rules updated. .. cfgcmd:: set firewall name <name> rule <1-999999> source mac-address <mac-address> @@ -355,37 +388,40 @@ There are a lot of matching criteria against which the package can be tested. set firewall ipv6-name WAN-IN-v6 rule 10 source port '!22,https,3333-3338' .. cfgcmd:: set firewall name <name> rule <1-999999> source group - address-group <name> + address-group <name | !name> .. cfgcmd:: set firewall name <name> rule <1-999999> destination group - address-group <name> + address-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - address-group <name> + address-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - address-group <name> + address-group <name | !name> - Use a specific address-group + Use a specific address-group. Prepend character '!' for inverted matching + criteria. .. cfgcmd:: set firewall name <name> rule <1-999999> source group - network-group <name> + network-group <name | !name> .. cfgcmd:: set firewall name <name> rule <1-999999> destination group - network-group <name> + network-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - network-group <name> + network-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - network-group <name> + network-group <name | !name> - Use a specific network-group + Use a specific network-group. Prepend character '!' for inverted matching + criteria. .. cfgcmd:: set firewall name <name> rule <1-999999> source group - port-group <name> + port-group <name | !name> .. cfgcmd:: set firewall name <name> rule <1-999999> destination group - port-group <name> + port-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group - port-group <name> + port-group <name | !name> .. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group - port-group <name> + port-group <name | !name> - Use a specific port-group + Use a specific port-group. Prepend character '!' for inverted matching + criteria. .. cfgcmd:: set firewall name <name> rule <1-999999> protocol [<text> | <0-255> | all | tcp_udp] @@ -423,6 +459,26 @@ There are a lot of matching criteria against which the package can be tested. Match against the state of a packet. +.. cfgcmd:: set firewall name <name> rule <1-999999> ttl <eq | gt | lt> <0-255> + + Match time to live parameter, where 'eq' stands for 'equal'; 'gt' stands for + 'greater than', and 'lt' stands for 'less than'. + +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> hop-limit <eq | gt | + lt> <0-255> + + Match hop-limit parameter, where 'eq' stands for 'equal'; 'gt' stands for + 'greater than', and 'lt' stands for 'less than'. + +.. cfgcmd:: set firewall name <name> rule <1-999999> recent count <1-255> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent count <1-255> +.. cfgcmd:: set firewall name <name> rule <1-999999> recent time <second | + minute | hour> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> recent time <second | + minute | hour> + + Match when 'count' amount of connections are seen within 'time'. These + matching criteria can be used to block brute-force attempts. *********************************** Applying a Rule-Set to an Interface @@ -495,10 +551,10 @@ Applying a Rule-Set to a Zone Before you are able to apply a rule-set to a zone you have to create the zones first. -It helps to think of the syntax as: (see below). The 'rule-set' should be +It helps to think of the syntax as: (see below). The 'rule-set' should be written from the perspective of: *Source Zone*-to->*Destination Zone* -.. cfgcmd:: set zone-policy zone <Destination Zone> from <Source Zone> +.. cfgcmd:: set zone-policy zone <Destination Zone> from <Source Zone> firewall name <rule-set> .. cfgcmd:: set zone-policy zone <name> from <name> firewall name @@ -786,3 +842,11 @@ Example Partial Config } } } + + +Update geoip database +===================== + +.. opcmd:: update geoip + + Command used to update GeoIP database and firewall sets. |