diff options
Diffstat (limited to 'docs/configuration/firewall/index.rst')
| -rw-r--r-- | docs/configuration/firewall/index.rst | 81 |
1 files changed, 41 insertions, 40 deletions
diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index c5be158f..6bc362ea 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -244,7 +244,7 @@ Rule-Sets A rule-set is a named collection of firewall rules that can be applied to an interface or a zone. Each rule is numbered, has an action to apply if the rule is matched, and the ability to specify the criteria to -match. Data packets go through the rules from 1 - 9999, at the first match +match. Data packets go through the rules from 1 - 999999, at the first match the action of the rule will be executed. .. cfgcmd:: set firewall name <name> description <text> @@ -264,25 +264,26 @@ the action of the rule will be executed. Use this command to enable the logging of the default action. -.. cfgcmd:: set firewall name <name> rule <1-9999> action [drop | reject | - accept] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> action [drop | reject | +.. cfgcmd:: set firewall name <name> rule <1-999999> action [drop | reject | accept] +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> action [drop | + reject | accept] This required setting defines the action of the current rule. -.. cfgcmd:: set firewall name <name> rule <1-9999> description <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> description <text> +.. cfgcmd:: set firewall name <name> rule <1-999999> description <text> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> description <text> Provide a description for each rule. -.. cfgcmd:: set firewall name <name> rule <1-9999> log [disable | enable] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> log [disable | enable] +.. cfgcmd:: set firewall name <name> rule <1-999999> log [disable | enable] +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> log [disable | + enable] Enable or disable logging for the matched packet. -.. cfgcmd:: set firewall name <name> rule <1-9999> disable -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> disable +.. cfgcmd:: set firewall name <name> rule <1-999999> disable +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> disable If you want to disable a rule but let it in the configuration. @@ -292,13 +293,13 @@ Matching criteria There are a lot of matching criteria against which the package can be tested. -.. cfgcmd:: set firewall name <name> rule <1-9999> source address +.. cfgcmd:: set firewall name <name> rule <1-999999> source address [address | addressrange | CIDR] -.. cfgcmd:: set firewall name <name> rule <1-9999> destination address +.. cfgcmd:: set firewall name <name> rule <1-999999> destination address [address | addressrange | CIDR] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source address +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source address [address | addressrange | CIDR] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> destination address +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination address [address | addressrange | CIDR] This is similar to the network groups part, but here you are able to negate @@ -312,9 +313,9 @@ There are a lot of matching criteria against which the package can be tested. set firewall ipv6-name WAN-IN-v6 rule 100 source address 2001:db8::202 -.. cfgcmd:: set firewall name <name> rule <1-9999> source mac-address +.. cfgcmd:: set firewall name <name> rule <1-999999> source mac-address <mac-address> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source mac-address +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source mac-address <mac-address> Only in the source criteria, you can specify a mac-address. @@ -324,13 +325,13 @@ There are a lot of matching criteria against which the package can be tested. set firewall name LAN-IN-v4 rule 100 source mac-address 00:53:00:11:22:33 set firewall name LAN-IN-v4 rule 101 source mac-address !00:53:00:aa:12:34 -.. cfgcmd:: set firewall name <name> rule <1-9999> source port +.. cfgcmd:: set firewall name <name> rule <1-999999> source port [1-65535 | portname | start-end] -.. cfgcmd:: set firewall name <name> rule <1-9999> destination port +.. cfgcmd:: set firewall name <name> rule <1-999999> destination port [1-65535 | portname | start-end] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source port +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source port [1-65535 | portname | start-end] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> destination port +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination port [1-65535 | portname | start-end] A port can be set with a port number or a name which is here @@ -349,42 +350,42 @@ There are a lot of matching criteria against which the package can be tested. set firewall ipv6-name WAN-IN-v6 rule 10 source port '!22,https,3333-3338' -.. cfgcmd:: set firewall name <name> rule <1-9999> source group +.. cfgcmd:: set firewall name <name> rule <1-999999> source group address-group <name> -.. cfgcmd:: set firewall name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall name <name> rule <1-999999> destination group address-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group address-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group address-group <name> Use a specific address-group -.. cfgcmd:: set firewall name <name> rule <1-9999> source group +.. cfgcmd:: set firewall name <name> rule <1-999999> source group network-group <name> -.. cfgcmd:: set firewall name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall name <name> rule <1-999999> destination group network-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group network-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group network-group <name> Use a specific network-group -.. cfgcmd:: set firewall name <name> rule <1-9999> source group +.. cfgcmd:: set firewall name <name> rule <1-999999> source group port-group <name> -.. cfgcmd:: set firewall name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall name <name> rule <1-999999> destination group port-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> source group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> source group port-group <name> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> destination group +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> destination group port-group <name> Use a specific port-group -.. cfgcmd:: set firewall name <name> rule <1-9999> protocol [<text> | +.. cfgcmd:: set firewall name <name> rule <1-999999> protocol [<text> | <0-255> | all | tcp_udp] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> protocol [<text> | +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> protocol [<text> | <0-255> | all | tcp_udp] Match a protocol criteria. A protocol number or a name which is here @@ -398,8 +399,8 @@ There are a lot of matching criteria against which the package can be tested. set firewall name WAN-IN-v4 rule 11 protocol !tcp_udp set firewall ipv6-name WAN-IN-v6 rule 10 protocol tcp -.. cfgcmd:: set firewall name <name> rule <1-9999> tcp flags <text> -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> tcp flags <text> +.. cfgcmd:: set firewall name <name> rule <1-999999> tcp flags <text> +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> tcp flags <text> Allowed values fpr TCP flags: ``SYN``, ``ACK``, ``FIN``, ``RST``, ``URG``, ``PSH``, ``ALL`` When specifying more than one flag, flags should be comma @@ -411,9 +412,9 @@ There are a lot of matching criteria against which the package can be tested. set firewall name WAN-IN-v4 rule 12 tcp flags 'SYN' set firewall name WAN-IN-v4 rule 13 tcp flags 'SYN,!ACK,!FIN,!RST' -.. cfgcmd:: set firewall name <name> rule <1-9999> state [established | +.. cfgcmd:: set firewall name <name> rule <1-999999> state [established | invalid | new | related] [enable | disable] -.. cfgcmd:: set firewall ipv6-name <name> rule <1-9999> state [established | +.. cfgcmd:: set firewall ipv6-name <name> rule <1-999999> state [established | invalid | new | related] [enable | disable] Match against the state of a packet. @@ -636,7 +637,7 @@ Rule-set overview This will show you a statistic of all rule-sets since the last boot. -.. opcmd:: show firewall [name | ipv6name] <name> rule <1-9999> +.. opcmd:: show firewall [name | ipv6name] <name> rule <1-999999> This command will give an overview of a rule in a single rule-set @@ -672,7 +673,7 @@ Rule-set overview This will show you a rule-set statistic since the last boot. -.. opcmd:: show firewall [name | ipv6name] <name> rule <1-9999> +.. opcmd:: show firewall [name | ipv6name] <name> rule <1-999999> This command will give an overview of a rule in a single rule-set. |