diff options
Diffstat (limited to 'docs/configuration/firewall')
| -rw-r--r-- | docs/configuration/firewall/index.rst | 35 | ||||
| -rw-r--r-- | docs/configuration/firewall/index.rst~ | 179 |
2 files changed, 197 insertions, 17 deletions
diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index bdfc2069..74d5bc20 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -4,26 +4,27 @@ Firewall ######## -With VyOS being based on top of Linux and its kernel, the Netfilter project +As VyOS is based on Linux it leverages its firewall. The Netfilter project created iptables and its successor nftables for the Linux kernel to -work directly on the data flows. This now extends the concept of zone-based -security to allow for manipulating the data at multiple stages once accepted -by the network interface and the driver before being handed off to the -destination (e.g., a web server OR another device). +work directly on packet data flows. This now extends the concept of +zone-based security to allow for manipulating the data at multiple stages once +accepted by the network interface and the driver before being handed off to +the destination (e.g., a web server OR another device). -A simplified traffic flow diagram, based on Netfilter packet flow, is shown next, in -order to have a full view and understanding of how packets are processed, and -what possible paths traffic can take. +A simplified traffic flow diagram, based on Netfilter packet flow, is shown +next, in order to have a full view and understanding of how packets are +processed, and what possible paths traffic can take. .. figure:: /_static/images/firewall-gral-packet-flow.png -Main points regarding this packet flow and terminology used in VyOS firewall are below: +The main points regarding this packet flow and terminology used in VyOS +firewall are covered below: - * **Bridge Port?**: choose appropriate path based on whether interface where the - packet was received is part of a bridge, or not. + * **Bridge Port?**: choose appropriate path based on whether interface + where the packet was received is part of a bridge, or not. -If interface where the packet was received isn't part of a bridge, then packet -is processed at the **IP Layer**: +If the interface where the packet was received isn't part of a bridge, then +packetis processed at the **IP Layer**: * **Prerouting**: several actions can be done in this stage, and currently these actions are defined in different parts in VyOS configuration. Order @@ -79,8 +80,8 @@ is processed at the **IP Layer**: * **Source NAT**: rules defined under ``set [nat | nat66] destination...``. -If interface where the packet was received is part of a bridge, then packet -is processed at the **Bridge Layer**, which contains a basic setup for +If the interface where the packet was received is part of a bridge, then +packetis processed at the **Bridge Layer**, which contains a basic setup for bridge filtering: * **Forward (Bridge)**: stage where traffic that is trespasing through the @@ -88,7 +89,7 @@ bridge filtering: * ``set firewall bridge forward filter ...``. -Main structure VyOS firewall cli is shown next: +The main structure VyOS firewall cli is shown next: .. code-block:: none @@ -134,7 +135,7 @@ Main structure VyOS firewall cli is shown next: - custom_zone_name + ... -Please, refer to appropiate section for more information about firewall +Please, refer to appropriate section for more information about firewall configuration: .. toctree:: diff --git a/docs/configuration/firewall/index.rst~ b/docs/configuration/firewall/index.rst~ new file mode 100644 index 00000000..bdfc2069 --- /dev/null +++ b/docs/configuration/firewall/index.rst~ @@ -0,0 +1,179 @@ +:lastproofread: 2023-11-23 + +######## +Firewall +######## + +With VyOS being based on top of Linux and its kernel, the Netfilter project +created iptables and its successor nftables for the Linux kernel to +work directly on the data flows. This now extends the concept of zone-based +security to allow for manipulating the data at multiple stages once accepted +by the network interface and the driver before being handed off to the +destination (e.g., a web server OR another device). + +A simplified traffic flow diagram, based on Netfilter packet flow, is shown next, in +order to have a full view and understanding of how packets are processed, and +what possible paths traffic can take. + +.. figure:: /_static/images/firewall-gral-packet-flow.png + +Main points regarding this packet flow and terminology used in VyOS firewall are below: + + * **Bridge Port?**: choose appropriate path based on whether interface where the + packet was received is part of a bridge, or not. + +If interface where the packet was received isn't part of a bridge, then packet +is processed at the **IP Layer**: + + * **Prerouting**: several actions can be done in this stage, and currently + these actions are defined in different parts in VyOS configuration. Order + is important, and all these actions are performed before any actions + defined under ``firewall`` section. Relevant configuration that acts in + this stage are: + + * **Conntrack Ignore**: rules defined under ``set system conntrack ignore + [ipv4 | ipv6] ...``. + + * **Policy Route**: rules defined under ``set policy [route | route6] + ...``. + + * **Destination NAT**: rules defined under ``set [nat | nat66] + destination...``. + + * **Destination is the router?**: choose appropriate path based on + destination IP address. Transit forward continues to **forward**, + while traffic that destination IP address is configured on the router + continues to **input**. + + * **Input**: stage where traffic destined for the router itself can be + filtered and controlled. This is where all rules for securing the router + should take place. This includes ipv4 and ipv6 filtering rules, defined + in: + + * ``set firewall ipv4 input filter ...``. + + * ``set firewall ipv6 input filter ...``. + + * **Forward**: stage where transit traffic can be filtered and controlled. + This includes ipv4 and ipv6 filtering rules, defined in: + + * ``set firewall ipv4 forward filter ...``. + + * ``set firewall ipv6 forward filter ...``. + + * **Output**: stage where traffic that originates from the router itself + can be filtered and controlled. Bear in mind that this traffic can be a + new connection originated by a internal process running on VyOS router, + such as NTP, or a response to traffic received externaly through + **inputt** (for example response to an ssh login attempt to the router). + This includes ipv4 and ipv6 filtering rules, defined in: + + * ``set firewall ipv4 input filter ...``. + + * ``set firewall ipv6 output filter ...``. + + * **Postrouting**: as in **Prerouting**, several actions defined in + different parts of VyOS configuration are performed in this + stage. This includes: + + * **Source NAT**: rules defined under ``set [nat | nat66] + destination...``. + +If interface where the packet was received is part of a bridge, then packet +is processed at the **Bridge Layer**, which contains a basic setup for +bridge filtering: + + * **Forward (Bridge)**: stage where traffic that is trespasing through the + bridge is filtered and controlled: + + * ``set firewall bridge forward filter ...``. + +Main structure VyOS firewall cli is shown next: + +.. code-block:: none + + - set firewall + * bridge + - forward + + filter + * flowtable + - custom_flow_table + + ... + * global-options + + all-ping + + broadcast-ping + + ... + * group + - address-group + - ipv6-address-group + - network-group + - ipv6-network-group + - interface-group + - mac-group + - port-group + - domain-group + * ipv4 + - forward + + filter + - input + + filter + - output + + filter + - name + + custom_name + * ipv6 + - forward + + filter + - input + + filter + - output + + filter + - ipv6-name + + custom_name + * zone + - custom_zone_name + + ... + +Please, refer to appropiate section for more information about firewall +configuration: + +.. toctree:: + :maxdepth: 1 + :includehidden: + + global-options + groups + bridge + ipv4 + ipv6 + flowtables + +.. note:: **For more information** + of Netfilter hooks and Linux networking packet flows can be + found in `Netfilter-Hooks + <https://wiki.nftables.org/wiki-nftables/index.php/Netfilter_hooks>`_ + + +Zone-based firewall +^^^^^^^^^^^^^^^^^^^ +.. toctree:: + :maxdepth: 1 + :includehidden: + + zone + +With zone-based firewalls a new concept was implemented, in addtion to the +standard in and out traffic flows, a local flow was added. This local was for +traffic originating and destined to the router itself. Which means additional +rules were required to secure the firewall itself from the network, in +addition to the existing inbound and outbound rules from the traditional +concept above. + +To configure VyOS with the +:doc:`zone-based firewall configuration </configuration/firewall/zone>` + +As the example image below shows, the device now needs rules to allow/block +traffic to or from the services running on the device that have open +connections on that interface. + +.. figure:: /_static/images/firewall-zonebased.png |