diff options
Diffstat (limited to 'docs/configuration/interfaces/pppoe.rst')
| -rw-r--r-- | docs/configuration/interfaces/pppoe.rst | 17 |
1 files changed, 7 insertions, 10 deletions
diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst index e1bb3056..dbf92caf 100644 --- a/docs/configuration/interfaces/pppoe.rst +++ b/docs/configuration/interfaces/pppoe.rst @@ -1,4 +1,4 @@ -:lastproofread: 2021-07-09 +:lastproofread: 2022-07-27 .. _pppoe-interface: @@ -126,6 +126,9 @@ PPPoE options set interfaces pppoe pppoe0 no-default-route + .. note:: This command got added in VyOS 1.4 and inverts the logic from the old + ``default-route`` CLI option. + .. cfgcmd:: set interfaces pppoe <interface> default-route-distance <distance> Set the distance for the default gateway sent by the PPPoE server. @@ -310,11 +313,6 @@ Requirements: If you are switching from a DHCP based ISP like cable then be aware that things like VPN links may need to have their MTU sizes adjusted to work within this limit. -* With the ``default-route`` option set to ``auto``, VyOS will only add the - default gateway you receive from your DSL ISP to the routing table if you - have no other WAN connections. If you wish to use a dual WAN connection, - change the ``default-route`` option to ``force``. You could also install - a static route and set the ``default-route`` option to ``none``. * With the ``name-server`` option set to ``none``, VyOS will ignore the nameservers your ISP sends you and thus you can fully rely on the ones you have configured statically. @@ -322,10 +320,11 @@ Requirements: .. note:: Syntax has changed from VyOS 1.2 (crux) and it will be automatically migrated during an upgrade. +.. note:: A default route is automatically installed once the interface is up. + To change this behavior use the ``no-default-route`` CLI option. + .. code-block:: none - set interfaces pppoe pppoe0 default-route 'auto' - set interfaces pppoe pppoe0 mtu 1492 set interfaces pppoe pppoe0 authentication user 'userid' set interfaces pppoe pppoe0 authentication password 'secret' set interfaces pppoe pppoe0 source-interface 'eth0' @@ -351,8 +350,6 @@ which is the default VLAN for Deutsche Telekom: .. code-block:: none - set interfaces pppoe pppoe0 default-route 'auto' - set interfaces pppoe pppoe0 mtu 1492 set interfaces pppoe pppoe0 authentication user 'userid' set interfaces pppoe pppoe0 authentication password 'secret' set interfaces pppoe pppoe0 source-interface 'eth0.7' |