diff options
Diffstat (limited to 'docs/configuration/interfaces')
| -rw-r--r-- | docs/configuration/interfaces/pppoe.rst | 5 | ||||
| -rw-r--r-- | docs/configuration/interfaces/wireless.rst | 4 |
2 files changed, 3 insertions, 6 deletions
diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst index decfd348..393c71ed 100644 --- a/docs/configuration/interfaces/pppoe.rst +++ b/docs/configuration/interfaces/pppoe.rst @@ -168,10 +168,6 @@ PPPoE options IPv6 ---- -.. cfgcmd:: set interfaces pppoe <interface> ipv6 enable - - Use this command to enable IPv6 support on this PPPoE connection. - .. cfgcmd:: set interfaces pppoe <interface> ipv6 address autoconf Use this command to enable acquisition of IPv6 address using stateless @@ -303,5 +299,4 @@ If you do not know the prefix size delegated to you, start with sla-len 0. set interfaces pppoe pppoe0 dhcpv6-options prefix-delegation interface eth0 sla-id 0 set interfaces pppoe pppoe0 dhcpv6-options prefix-delegation interface eth0 sla-len 8 set interfaces pppoe pppoe0 ipv6 address autoconf - set interfaces pppoe pppoe0 ipv6 enable set interfaces pppoe pppoe0 source-interface eth1 diff --git a/docs/configuration/interfaces/wireless.rst b/docs/configuration/interfaces/wireless.rst index 82f66cf4..fca285eb 100644 --- a/docs/configuration/interfaces/wireless.rst +++ b/docs/configuration/interfaces/wireless.rst @@ -225,12 +225,14 @@ VHT (Very High Throughput) capabilities (802.11ac) * ``multi-user-beamformer`` - Support for operation as single user beamformer * ``multi-user-beamformee`` - Support for operation as single user beamformer -.. cfgcmd:: set interfaces wireless <interface> capabilities vht center-channel-freq <freq-1 | freq-2> +.. cfgcmd:: set interfaces wireless <interface> capabilities vht center-channel-freq <freq-1 | freq-2> <number> VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes) VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode) + <number> must be from 34 - 173. For 80 MHz channels it should be channel + 6. + .. cfgcmd:: set interfaces wireless <interface> capabilities vht channel-set-width <0 | 1 | 2 | 3> * ``0`` - 20 or 40 MHz channel width (default) |