diff options
Diffstat (limited to 'docs/configuration/interfaces')
| -rw-r--r-- | docs/configuration/interfaces/bridge.rst | 6 | ||||
| -rw-r--r-- | docs/configuration/interfaces/openvpn.rst | 2 | ||||
| -rw-r--r-- | docs/configuration/interfaces/wireless.rst | 21 |
3 files changed, 27 insertions, 2 deletions
diff --git a/docs/configuration/interfaces/bridge.rst b/docs/configuration/interfaces/bridge.rst index ebb2232a..ddc293cc 100644 --- a/docs/configuration/interfaces/bridge.rst +++ b/docs/configuration/interfaces/bridge.rst @@ -78,7 +78,11 @@ Bridge Options .. cfgcmd:: set interfaces bridge <interface> igmp querier - Enable IGMP querier + Enable IGMP and MLD querier. + +.. cfgcmd:: set interfaces bridge <interface> igmp snooping + + Enable IGMP and MLD snooping. .. _stp: diff --git a/docs/configuration/interfaces/openvpn.rst b/docs/configuration/interfaces/openvpn.rst index 3fe6b1d4..ff32d869 100644 --- a/docs/configuration/interfaces/openvpn.rst +++ b/docs/configuration/interfaces/openvpn.rst @@ -332,7 +332,7 @@ before using under the openvpn interface configuration. Now we need to specify the server network settings. In all cases we need to specify the subnet for client tunnel endpoints. Since we want clients to access -a specific network behind out router, we will use a push-route option for +a specific network behind our router, we will use a push-route option for installing that route on clients. .. code-block:: none diff --git a/docs/configuration/interfaces/wireless.rst b/docs/configuration/interfaces/wireless.rst index b775011f..231652a0 100644 --- a/docs/configuration/interfaces/wireless.rst +++ b/docs/configuration/interfaces/wireless.rst @@ -590,3 +590,24 @@ To get it to work as an access point with this configuration you will need to set up a DHCP server to work with that network. You can - of course - also bridge the Wireless interface with any configured bridge (:ref:`bridge-interface`) on the system. + +.. _wireless-interface-intel-ax200: + +Intel AX200 +=========== + +The Intel AX200 card does not work out of the box in AP mode, see +https://unix.stackexchange.com/questions/598275/intel-ax200-ap-mode. You can +still put this card into AP mode using the following configuration: + +.. stop_vyoslinter +.. code-block:: none + + set interfaces wireless wlan0 channel '1' + set interfaces wireless wlan0 country-code 'us' + set interfaces wireless wlan0 mode 'n' + set interfaces wireless wlan0 physical-device 'phy0' + set interfaces wireless wlan0 ssid 'VyOS' + set interfaces wireless wlan0 type 'access-point' + +.. start_vyoslinter |