summaryrefslogtreecommitdiff
path: root/docs/configuration/interfaces
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configuration/interfaces')
-rw-r--r--docs/configuration/interfaces/vxlan.rst32
1 files changed, 31 insertions, 1 deletions
diff --git a/docs/configuration/interfaces/vxlan.rst b/docs/configuration/interfaces/vxlan.rst
index 86568686..2cb0b2f1 100644
--- a/docs/configuration/interfaces/vxlan.rst
+++ b/docs/configuration/interfaces/vxlan.rst
@@ -132,6 +132,36 @@ For optimal scalability, Multicast shouldn't be used at all, but instead use BGP
to signal all connected devices between leaves. Unfortunately, VyOS does not yet
support this.
+Single VXLAN device (SVD)
+=========================
+
+FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
+working with the Linux kernel. In this new way, the mapping of a VLAN to a
+:abbr:`VNI (VXLAN Network Identifier (or VXLAN Segment ID))` is configured
+against a container VXLAN interface which is referred to as a
+:abbr:`SVD (Single VXLAN device)`.
+
+Multiple VLAN to VNI mappings can be configured against the same SVD. This
+allows for a significant scaling of the number of VNIs since a separate VXLAN
+interface is no longer required for each VNI.
+
+.. cfgcmd:: set interfaces vxlan <interface> vlan-to-vni <vlan> vni <vni>
+
+ Maps the VNI to the specified VLAN id. The VLAN can then be consumed by
+ a bridge.
+
+ Sample configuration of SVD with VLAN to VNI mappings is shown below.
+
+ .. code-block:: none
+
+ set interfaces bridge br0 member interface vxlan0
+ set interfaces vxlan vxlan0 external
+ set interfaces vxlan vxlan0 source-interface 'dum0'
+ set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
+ set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
+ set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
+ set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
+
Example
-------
@@ -252,7 +282,7 @@ advertised.
set interfaces bridge br241 member interface 'eth1.241'
set interfaces bridge br241 member interface 'vxlan241'
-Binds eth1.241 and vxlan241 to each other by making them both member
+Binds eth1.241 and vxlan241 to each other by making them both member
interfaces of the same bridge.
.. code-block:: none