1 files changed, 205 insertions, 0 deletions
diff --git a/docs/configuration/policy/index.rst b/docs/configuration/policy/index.rst
new file mode 100644
index 00000000..4b7d48ee
--- /dev/null
+++ b/docs/configuration/policy/index.rst
@@ -0,0 +1,205 @@
+.. include:: /_include/need_improvement.txt
+
+######
+Policy
+######
+
+Routing Policies could be used to tell the router (self or neighbors) what
+routes and their attributes needs to be put into the routing table.
+
+There could be a wide range of routing policies. Some examples are below:
+
+* Set some metric to routes learned from a particular neighbor
+* Set some attributes (like AS PATH or Community value) to advertised routes to neighbors
+* Prefer a specific routing protocol routes over another routing protocol running on the same router
+
+Example
+=======
+
+**Policy definition:**
+
+.. code-block:: none
+
+  # Create policy
+  set policy route-map setmet rule 2 action 'permit'
+  set policy route-map setmet rule 2 set as-path-prepend '2 2 2'
+
+  # Apply policy to BGP
+  set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast route-map import 'setmet'
+  set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast soft-reconfiguration 'inbound'
+
+Using 'soft-reconfiguration' we get the policy update without bouncing the
+neighbor.
+
+**Routes learned before routing policy applied:**
+
+.. code-block:: none
+
+  vyos@vos1:~$ show ip bgp
+  BGP table version is 0, local router ID is 192.168.56.101
+  Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
+                r RIB-failure, S Stale, R Removed
+  Origin codes: i - IGP, e - EGP, ? - incomplete
+
+     Network          Next Hop            Metric LocPrf Weight Path
+  *> 198.51.100.3/32   203.0.113.2           1             0 2 i  < Path
+
+  Total number of prefixes 1
+
+**Routes learned after routing policy applied:**
+
+.. code-block:: none
+
+  vyos@vos1:~$ sho ip b
+  BGP table version is 0, local router ID is 192.168.56.101
+  Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
+                r RIB-failure, S Stale, R Removed
+  Origin codes: i - IGP, e - EGP, ? - incomplete
+
+     Network          Next Hop            Metric LocPrf Weight Path
+  *> 198.51.100.3/32   203.0.113.2           1             0 2 2 2 2 i
+
+  Total number of prefixes 1
+  vyos@vos1:~$
+
+You now see the longer AS path.
+
+
+.. include:: /_include/need_improvement.txt
+
+.. _routing-pbr:
+
+###
+PBR
+###
+
+:abbr:`PBR (Policy-Based Routing)` allowing traffic to be assigned to
+different routing tables. Traffic can be matched using standard 5-tuple
+matching (source address, destination address, protocol, source port,
+destination port).
+
+Transparent Proxy
+=================
+
+The following example will show how VyOS can be used to redirect web
+traffic to an external transparent proxy:
+
+.. code-block:: none
+
+  set policy route FILTER-WEB rule 1000 destination port 80
+  set policy route FILTER-WEB rule 1000 protocol tcp
+  set policy route FILTER-WEB rule 1000 set table 100
+
+This creates a route policy called FILTER-WEB with one rule to set the
+routing table for matching traffic (TCP port 80) to table ID 100
+instead of the default routing table.
+
+To create routing table 100 and add a new default gateway to be used by
+traffic matching our route policy:
+
+.. code-block:: none
+
+  set protocols static table 100 route 0.0.0.0/0 next-hop 10.255.0.2
+
+This can be confirmed using the ``show ip route table 100`` operational
+command.
+
+Finally, to apply the policy route to ingress traffic on our LAN
+interface, we use:
+
+.. code-block:: none
+
+  set interfaces ethernet eth1 policy route FILTER-WEB
+
+
+Multiple Uplinks
+================
+
+VyOS Policy-Based Routing (PBR) works by matching source IP address
+ranges and forwarding the traffic using different routing tables.
+
+Routing tables that will be used in this example are:
+
+* ``table 10`` Routing table used for VLAN 10 (192.168.188.0/24)
+* ``table 11`` Routing table used for VLAN 11 (192.168.189.0/24)
+* ``main`` Routing table used by VyOS and other interfaces not
+  participating in PBR
+
+.. figure:: /_static/images/pbr_example_1.png
+   :scale: 80 %
+   :alt: PBR multiple uplinks
+
+   Policy-Based Routing with multiple ISP uplinks
+   (source ./draw.io/pbr_example_1.drawio)
+
+Add default routes for routing ``table 10`` and ``table 11``
+
+.. code-block:: none
+
+  set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.1.1
+  set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2
+
+Add policy route matching VLAN source addresses
+
+.. code-block:: none
+
+  set policy route PBR rule 20 set table '10'
+  set policy route PBR rule 20 description 'Route VLAN10 traffic to table 10'
+  set policy route PBR rule 20 source address '192.168.188.0/24'
+
+  set policy route PBR rule 30 set table '11'
+  set policy route PBR rule 30 description 'Route VLAN11 traffic to table 11'
+  set policy route PBR rule 30 source address '192.168.189.0/24'
+
+Apply routing policy to **inbound** direction of out VLAN interfaces
+
+.. code-block:: none
+
+  set interfaces ethernet eth0 vif 10 policy route 'PBR'
+  set interfaces ethernet eth0 vif 11 policy route 'PBR'
+
+
+**OPTIONAL:** Exclude Inter-VLAN traffic (between VLAN10 and VLAN11)
+from PBR
+
+.. code-block:: none
+
+  set policy route PBR rule 10 description 'VLAN10 <-> VLAN11 shortcut'
+  set policy route PBR rule 10 destination address '192.168.188.0/24'
+  set policy route PBR rule 10 destination address '192.168.189.0/24'
+  set policy route PBR rule 10 set table 'main'
+
+These commands allow the VLAN10 and VLAN20 hosts to communicate with
+each other using the main routing table.
+
+Local route
+===========
+
+The following example allows VyOS to use :abbr:`PBR (Policy-Based Routing)` for traffic, which originated from the router itself.
+That solution for multiple ISP's and VyOS router will respond from the same interface that the packet was received.
+Also, it used, if we want that one VPN tunnel to be through one provider, and the second through another.
+
+* ``192.168.1.254`` IP addreess on VyOS eth1 from ISP1
+* ``192.168.2.254`` IP addreess on VyOS eth2 from ISP2
+* ``table 10`` Routing table used for ISP1
+* ``table 11`` Routing table used for ISP2
+
+
+.. code-block:: none
+
+  set policy local-route rule 101 set table '10'
+  set policy local-route rule 101 source '192.0.1.254'
+  set policy local-route rule 102 set table '11'
+  set policy local-route rule 102 source '192.0.2.254'
+  set protocols static table 10 route '0.0.0.0/0' next-hop '192.0.1.1'
+  set protocols static table 11 route '0.0.0.0/0' next-hop '192.0.2.2'
+
+Add multiple source IP in one rule with same priority
+
+.. code-block:: none
+
+  set policy local-route rule 101 set table '10'
+  set policy local-route rule 101 source '192.0.1.254'
+  set policy local-route rule 101 source '192.0.1.253'
+  set policy local-route rule 101 source '203.0.113.0/24'
+