summaryrefslogtreecommitdiff
path: root/docs/configuration/protocols/bfd.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configuration/protocols/bfd.rst')
-rw-r--r--docs/configuration/protocols/bfd.rst117
1 files changed, 117 insertions, 0 deletions
diff --git a/docs/configuration/protocols/bfd.rst b/docs/configuration/protocols/bfd.rst
new file mode 100644
index 00000000..b8fdf489
--- /dev/null
+++ b/docs/configuration/protocols/bfd.rst
@@ -0,0 +1,117 @@
+.. include:: /_include/need_improvement.txt
+
+.. _routing-bfd:
+
+###
+BFD
+###
+
+:abbr:`BFD (Bidirectional Forwarding Detection)` is described and extended by
+the following RFCs: :rfc:`5880`, :rfc:`5881` and :rfc:`5883`.
+
+
+Configure BFD
+=============
+
+.. cfgcmd:: set protocols bfd peer <address>
+
+ Set BFD peer IPv4 address or IPv6 address
+
+.. cfgcmd:: set protocols bfd peer <address> echo-mode
+
+ Enables the echo transmission mode
+
+.. cfgcmd:: set protocols bfd peer <address> multihop
+
+ Allow this BFD peer to not be directly connected
+
+.. cfgcmd:: set protocols bfd peer <address> source [address <address> | interface <interface>]
+
+ Bind listener to specifid interface/address, mandatory for IPv6
+
+.. cfgcmd:: set protocols bfd peer <address> interval echo-interval <10-60000>
+
+ The minimal echo receive transmission interval that this system is capable of handling
+
+.. cfgcmd:: set protocols bfd peer <address> interval multiplier <2-255>
+
+ Remote transmission interval will be multiplied by this value
+
+.. cfgcmd:: set protocols bfd peer <address> interval [receive | transmit] <10-60000>
+
+ Interval in milliseconds
+
+.. cfgcmd:: set protocols bfd peer <address> shutdown
+
+ Disable a BFD peer
+
+
+Enable BFD in BGP
+-----------------
+
+.. cfgcmd:: set protocols bgp <asn> neighbor <address> bfd
+
+ Enable BFD on a single BGP neighbor
+
+.. cfgcmd:: set protocols bgp <asn> peer-group <group> bfd
+
+ Enable BFD on a BGP peer group
+
+
+
+Enable BFD in OSPF
+------------------
+
+.. cfgcmd:: set interfaces ethernet <ethN> ip ospf bfd
+
+ Enable BFD for ospf on a interface
+
+.. cfgcmd:: set interfaces ethernet <ethN> ipv6 ospfv3 bfd
+
+ Enable BFD for ospfv3 on a interface
+
+
+
+Operational Commands
+====================
+
+.. opcmd:: show protocols bfd peer
+
+ Show all BFD peers
+
+ .. code-block:: none
+
+ BFD Peers:
+ peer 198.51.100.33 vrf default interface eth4.100
+ ID: 4182341893
+ Remote ID: 12678929647
+ Status: up
+ Uptime: 1 month(s), 16 hour(s), 29 minute(s), 38 second(s)
+ Diagnostics: ok
+ Remote diagnostics: ok
+ Local timers:
+ Receive interval: 300ms
+ Transmission interval: 300ms
+ Echo transmission interval: 50ms
+ Remote timers:
+ Receive interval: 300ms
+ Transmission interval: 300ms
+ Echo transmission interval: 0ms
+
+ peer 198.51.100.55 vrf default interface eth4.101
+ ID: 4618932327
+ Remote ID: 3312345688
+ Status: up
+ Uptime: 20 hour(s), 16 minute(s), 19 second(s)
+ Diagnostics: ok
+ Remote diagnostics: ok
+ Local timers:
+ Receive interval: 300ms
+ Transmission interval: 300ms
+ Echo transmission interval: 50ms
+ Remote timers:
+ Receive interval: 300ms
+ Transmission interval: 300ms
+ Echo transmission interval: 0ms
+
+