1 files changed, 0 insertions, 71 deletions
diff --git a/docs/configuration/protocols/ospfv3.rst b/docs/configuration/protocols/ospfv3.rst
deleted file mode 100644
index f0e28983..00000000
--- a/docs/configuration/protocols/ospfv3.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-OSPFv3 (IPv6)
-#############
-
-A typical configuration using 2 nodes.
-
-**Node 1:**
-
-.. code-block:: none
-
-  set protocols ospfv3 area 0.0.0.0 interface eth1
-  set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64
-  set protocols ospfv3 parameters router-id 192.168.1.1
-  set protocols ospfv3 redistribute connected
-
-**Node 2:**
-
-.. code-block:: none
-
-  set protocols ospfv3 area 0.0.0.0 interface eth1
-  set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64
-  set protocols ospfv3 parameters router-id 192.168.2.1
-  set protocols ospfv3 redistribute connected
-
-.. note:: You can not easily redistribute IPv6 routes via OSPFv3 on a WireGuard
-   interface link. This requires you to configure link-local addresses manually
-   on the WireGuard interfaces, see :vytask:`T1483`.
-
-Example configuration for WireGuard interfaces:
-
-**Node 1**
-
-.. code-block:: none
-
-  set interfaces wireguard wg01 address 'fe80::216:3eff:fe51:fd8c/64'
-  set interfaces wireguard wg01 address '192.168.0.1/24'
-  set interfaces wireguard wg01 peer ospf02 allowed-ips '::/0'
-  set interfaces wireguard wg01 peer ospf02 allowed-ips '0.0.0.0/0'
-  set interfaces wireguard wg01 peer ospf02 endpoint '10.1.1.101:12345'
-  set interfaces wireguard wg01 peer ospf02 pubkey 'ie3...='
-  set interfaces wireguard wg01 port '12345'
-  set protocols ospfv3 parameters router-id 192.168.1.1
-  set protocols ospfv3 area 0.0.0.0 interface 'wg01'
-  set protocols ospfv3 area 0.0.0.0 interface 'lo'
-
-**Node 2**
-
-.. code-block:: none
-
-  set interfaces wireguard wg01 address 'fe80::216:3eff:fe0a:7ada/64'
-  set interfaces wireguard wg01 address '192.168.0.2/24'
-  set interfaces wireguard wg01 peer ospf01 allowed-ips '::/0'
-  set interfaces wireguard wg01 peer ospf01 allowed-ips '0.0.0.0/0'
-  set interfaces wireguard wg01 peer ospf01 endpoint '10.1.1.100:12345'
-  set interfaces wireguard wg01 peer ospf01 pubkey 'NHI...='
-  set interfaces wireguard wg01 port '12345'
-  set protocols ospfv3 parameters router-id 192.168.1.2
-  set protocols ospfv3 area 0.0.0.0 interface 'wg01'
-  set protocols ospfv3 area 0.0.0.0 interface 'lo'
-
-**Status**
-
-.. code-block:: none
-
-  vyos@ospf01:~$ sh ipv6 ospfv3 neighbor
-  Neighbor ID     Pri    DeadTime    State/IfState         Duration I/F[State]
-  192.168.0.2       1    00:00:37     Full/PointToPoint    00:18:03 wg01[PointToPoint]
-
-  vyos@ospf02# run sh ipv6 ospfv3 neighbor
-  Neighbor ID     Pri    DeadTime    State/IfState         Duration I/F[State]
-  192.168.0.1       1    00:00:39     Full/PointToPoint    00:19:44 wg01[PointToPoint]
-