summaryrefslogtreecommitdiff
path: root/docs/configuration/protocols
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configuration/protocols')
-rw-r--r--docs/configuration/protocols/rip.rst11
1 files changed, 6 insertions, 5 deletions
diff --git a/docs/configuration/protocols/rip.rst b/docs/configuration/protocols/rip.rst
index 4d46e2f0..db6b3b31 100644
--- a/docs/configuration/protocols/rip.rst
+++ b/docs/configuration/protocols/rip.rst
@@ -1,3 +1,4 @@
+:lastproofread: 2021-10-04
.. _rip:
###
@@ -57,20 +58,20 @@ Optional Configuration
.. cfgcmd:: set protocols rip default-distance <distance>
- This command change distance value of RIP. The distance range is 1 to 255.
+ This command change the distance value of RIP. The distance range is 1 to 255.
.. note:: Routes with a distance of 255 are effectively disabled and not
installed into the kernel.
.. cfgcmd:: set protocols rip network-distance <A.B.C.D/M> distance <distance>
- This command sets default RIP distance to specified value when the route’s
+ This command sets default RIP distance to a specified value when the routes
source IP address matches the specified prefix.
.. cfgcmd:: set protocols rip network-distance <A.B.C.D/M> access-list <name>
This command can be used with previous command to sets default RIP distance
- to specified value when the route’s source IP address matches the specified
+ to specified value when the route source IP address matches the specified
prefix and the specified access-list.
.. cfgcmd:: set protocols rip default-information originate
@@ -156,7 +157,7 @@ Redistribution Configuration
This command modifies the default metric (hop count) value for redistributed
routes. The metric range is 1 to 16. The default value is 1. This command
does not affect connected route even if it is redistributed by
- :cfgcmd:`redistribute connected`. To modify connected route’s metric
+ :cfgcmd:`redistribute connected`. To modify connected routes metric
value, please use :cfgcmd:`redistribute connected metric`.
@@ -178,7 +179,7 @@ Interfaces Configuration
This command disables split-horizon on the interface. By default, VyOS does
not advertise RIP routes out the interface over which they were learned
- (split horizon).
+ (split horizon).3
.. cfgcmd:: set interfaces <inttype> <intname> ip rip split-horizon poison-reverse