diff options
Diffstat (limited to 'docs/configuration/service/dhcp-server.rst')
| -rw-r--r-- | docs/configuration/service/dhcp-server.rst | 160 |
1 files changed, 0 insertions, 160 deletions
diff --git a/docs/configuration/service/dhcp-server.rst b/docs/configuration/service/dhcp-server.rst index 3946256e..28dddb2f 100644 --- a/docs/configuration/service/dhcp-server.rst +++ b/docs/configuration/service/dhcp-server.rst @@ -1,5 +1,3 @@ -.. _dhcp: - .. _dhcp-server: ########### @@ -621,161 +619,3 @@ Operation Mode Show only leases with the specified state. Possible states: abandoned, active, all, backup, expired, free, released, reset (default = active) - -########## -DHCP Relay -########## - -If you want your router to forward DHCP requests to an external DHCP server -you can configure the system to act as a DHCP relay agent. The DHCP relay -agent works with IPv4 and IPv6 addresses. - -All interfaces used for the DHCP relay must be configured. - -********** -IPv4 relay -********** - -Configuration -============= - -.. cfgcmd:: set service dhcp-relay interface <interface> - - Enable the DHCP relay service on the given interface. - -.. cfgcmd:: set service dhcp-relay server <server> - - Configure IP address of the DHCP `<server>` which will handle the relayed - packets. - -.. cfgcmd:: set service dhcp-relay relay-options relay-agents-packets discard - - The router should discard DHCP packages already containing relay agent - information to ensure that only requests from DHCP clients are forwarded. - -Options -------- - -.. cfgcmd:: set service dhcp-relay relay-options hop-count <count> - - Set the maximum hop `<count>` before packets are discarded. Range 0...255, - default 10. - -.. cfgcmd:: set service dhcp-relay relay-options max-size <size> - - Set maximum `<size>` of DHCP packets including relay agent information. If a - DHCP packet size surpasses this value it will be forwarded without appending - relay agent information. Range 64...1400, default 576. - -.. cfgcmd:: set service dhcp-relay relay-options relay-agents-packet - <append | discard | forward | replace> - - Four policies for reforwarding DHCP packets exist: - - * **append:** The relay agent is allowed to append its own relay information - to a received DHCP packet, disregarding relay information already present - in the packet. - - * **discard:** Received packets which already contain relay information will - be discarded. - - * **forward:** All packets are forwarded, relay information already present - will be ignored. - - * **replace:** Relay information already present in a packet is stripped and - replaced with the router's own relay information set. - -Example -======= - -* Listen for DHCP requests on interface ``eth1``. -* DHCP server is located at IPv4 address 10.0.1.4. -* Router receives DHCP client requests on ``eth1`` and relays them to the server - at 10.0.1.4. - -.. figure:: /_static/images/service_dhcp-relay01.png - :scale: 80 % - :alt: DHCP relay example - - DHCP relay example - -The generated configuration will look like: - -.. code-block:: none - - show service dhcp-relay - interface eth1 - server 10.0.1.4 - relay-options { - relay-agents-packets discard - } - -Operation -========= - -.. opcmd:: restart dhcp relay-agent - - Restart DHCP relay service - -********** -IPv6 relay -********** - -Configuration -============= - -.. cfgcmd:: set service dhcpv6-relay listen-interface <interface> - - Set eth1 to be the listening interface for the DHCPv6 relay. - - Multiple interfaces may be specified. - -.. cfgcmd:: set service dhcpv6-relay upstream-interface <interface> - address <server> - - Specifies an upstream network `<interface>` from which replies from - `<server>` and other relay agents will be accepted. - -Options -------- - -.. cfgcmd:: set service dhcpv6-relay max-hop-count 'count' - - Set maximum hop count before packets are discarded, default: 10 - -.. cfgcmd:: set service dhcpv6-relay use-interface-id-option - - If this is set the relay agent will insert the interface ID. This option is - set automatically if more than one listening interfaces are in use. - -Example -======= - -* DHCPv6 requests are received by the router on `listening interface` ``eth1`` -* Requests are forwarded through ``eth2`` as the `upstream interface` -* External DHCPv6 server is at 2001:db8::4 - -.. figure:: /_static/images/service_dhcpv6-relay01.png - :scale: 80 % - :alt: DHCPv6 relay example - - DHCPv6 relay example - -The generated configuration will look like: - -.. code-block:: none - - commit - show service dhcpv6-relay - listen-interface eth1 { - } - upstream-interface eth2 { - address 2001:db8::4 - } - -Operation -========= - -.. opcmd:: restart dhcpv6 relay-agent - - Restart DHCPv6 relay agent immediately. |