diff options
Diffstat (limited to 'docs/configuration/service/dns.rst')
| -rw-r--r-- | docs/configuration/service/dns.rst | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/docs/configuration/service/dns.rst b/docs/configuration/service/dns.rst index c96c0ab4..adc58d8e 100644 --- a/docs/configuration/service/dns.rst +++ b/docs/configuration/service/dns.rst @@ -308,40 +308,40 @@ VyOS is also able to use any service relying on protocols supported by ddclient. To use such a service, one must define a login, password, one or multiple hostnames, protocol and server. -.. cfgcmd:: set service dns dynamic interface <interface> service <service> +.. cfgcmd:: set service dns dynamic address <interface> service <service> host-name <hostname> Setup the dynamic DNS hostname `<hostname>` associated with the DynDNS - provider identified by `<service>` when the IP address on interface + provider identified by `<service>` when the IP address on address `<interface>` changes. -.. cfgcmd:: set service dns dynamic interface <interface> service <service> - login <username> +.. cfgcmd:: set service dns dynamic address <interface> service <service> + username <username> Configure `<username>` used when authenticating the update request for DynDNS service identified by `<service>`. For Namecheap, set the <domain> you wish to update. -.. cfgcmd:: set service dns dynamic interface <interface> service <service> +.. cfgcmd:: set service dns dynamic address <interface> service <service> password <password> Configure `<password>` used when authenticating the update request for DynDNS service identified by `<service>`. -.. cfgcmd:: set service dns dynamic interface <interface> service <service> +.. cfgcmd:: set service dns dynamic address <interface> service <service> protocol <protocol> When a ``custom`` DynDNS provider is used the protocol used for communicating to the provider must be specified under `<protocol>`. See the embedded completion helper for available protocols. -.. cfgcmd:: set service dns dynamic interface <interface> service <service> +.. cfgcmd:: set service dns dynamic address <interface> service <service> server <server> When a ``custom`` DynDNS provider is used the `<server>` where update requests are being sent to must be specified. -.. cfgcmd:: set service dns dynamic interface <interface> ipv6-enable +.. cfgcmd:: set service dns dynamic address <interface> ipv6-enable Allow explicit IPv6 address for the interface. @@ -353,10 +353,10 @@ Use DynDNS as your preferred provider: .. code-block:: none - set service dns dynamic interface eth0 service dyndns - set service dns dynamic interface eth0 service dyndns login my-login - set service dns dynamic interface eth0 service dyndns password my-password - set service dns dynamic interface eth0 service dyndns host-name my-dyndns-hostname + set service dns dynamic address eth0 service dyndns + set service dns dynamic address eth0 service dyndns username my-login + set service dns dynamic address eth0 service dyndns password my-password + set service dns dynamic address eth0 service dyndns host-name my-dyndns-hostname .. note:: Multiple services can be used per interface. Just specify as many services per interface as you like! @@ -366,12 +366,12 @@ Example IPv6 only: .. code-block:: none - set service dns dynamic interface eth0 ipv6-enable - set service dns dynamic interface eth0 service dyndns6 login my-login - set service dns dynamic interface eth0 service dyndns6 password my-password - set service dns dynamic interface eth0 service dyndns6 host-name my-dyndns-hostname - set service dns dynamic interface eth0 service dyndns6 protocol dyndns2 - set service dns dynamic interface eth0 service dyndns6 server dyndns-v6-server + set service dns dynamic address eth0 ipv6-enable + set service dns dynamic address eth0 service dyndns6 username my-login + set service dns dynamic address eth0 service dyndns6 password my-password + set service dns dynamic address eth0 service dyndns6 host-name my-dyndns-hostname + set service dns dynamic address eth0 service dyndns6 protocol dyndns2 + set service dns dynamic address eth0 service dyndns6 server dyndns-v6-server Running Behind NAT @@ -384,12 +384,12 @@ record will be updated to point to your internal IP. ddclient_ has another way to determine the WAN IP address. This is controlled by: -.. cfgcmd:: set service dns dynamic interface <interface> use-web url <url> +.. cfgcmd:: set service dns dynamic address <interface> web-options url <url> Use configured `<url>` to determine your IP address. ddclient_ will load `<url>` and tries to extract your IP address from the response. -.. cfgcmd:: set service dns dynamic interface <interface> use-web skip <pattern> +.. cfgcmd:: set service dns dynamic address <interface> web-options skip <pattern> ddclient_ will skip any address located before the string set in `<pattern>`. |