diff options
Diffstat (limited to 'docs/configuration/service/ipoe-server.rst')
| -rw-r--r-- | docs/configuration/service/ipoe-server.rst | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/docs/configuration/service/ipoe-server.rst b/docs/configuration/service/ipoe-server.rst new file mode 100644 index 00000000..3f794af8 --- /dev/null +++ b/docs/configuration/service/ipoe-server.rst @@ -0,0 +1,149 @@ +.. include:: /_include/need_improvement.txt + +.. _ipoe_server: + +########### +IPoE Server +########### + +VyOS utilizes `accel-ppp`_ to provide :abbr:`IPoE (Internet Protocol over +Ethernet)` server functionality. It can be used with local authentication +(mac-address) or a connected RADIUS server. + +IPoE is a method of delivering an IP payload over an Ethernet-based access +network or an access network using bridged Ethernet over Asynchronous Transfer +Mode (ATM) without using PPPoE. It directly encapsulates the IP datagrams in +Ethernet frames, using the standard :rfc:`894` encapsulation. + +The use of IPoE addresses the disadvantage that PPP is unsuited for multicast +delivery to multiple users. Typically, IPoE uses Dynamic Host Configuration +Protocol and Extensible Authentication Protocol to provide the same +functionality as PPPoE, but in a less robust manner. + +.. note:: Please be aware, due to an upstream bug, config changes/commits + will restart the ppp daemon and will reset existing IPoE sessions, + in order to become effective. + +Configuration +============= + +IPoE can be configure on different interfaces, it will depend on each specific +situation which interface will provide IPoE to clients. The clients mac address +and the incoming interface is being used as control parameter, to authenticate +a client. + +The example configuration below will assign an IP to the client on the incoming +interface eth2 with the client mac address 08:00:27:2f:d8:06. Other DHCP +discovery requests will be ignored, unless the client mac has been enabled in +the configuration. + +.. code-block:: none + + set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 + set service ipoe-server authentication mode 'local' + set service ipoe-server dns-server server-1 '8.8.8.8' + set service ipoe-server dns-server server-2 '8.8.4.4' + set service ipoe-server interface eth2 client-subnet '192.168.0.0/24' + + +The first address of the parameter ``client-subnet``, will be used as the +default gateway. Connected sessions can be checked via the ``show ipoe-server +sessions`` command. + +.. code-block:: none + + vyos@vyos:~$ show ipoe-server sessions + + ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid + -------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------ + ipoe0 | eth2 | 08:00:27:2f:d8:06 | 192.168.0.2 | | | | active | 00:45:05 | dccc870fd3134612 + + +IPv6 SLAAC and IA-PD +-------------------- + +To configure IPv6 assignments for clients, two options need to be configured. +A global prefix which is terminated on the clients cpe and a delegated prefix, +the client can use for devices routed via the clients cpe. + +IPv6 DNS addresses are optional. + +.. code-block:: none + + set service ipoe-server authentication interface eth3 mac-address 08:00:27:2F:D8:06 + set service ipoe-server authentication mode 'local' + set service ipoe-server client-ipv6-pool delegate-prefix '2001:db8:1::/48,56' + set service ipoe-server client-ipv6-pool prefix '2001:db8::/48,64' + set service ipoe-server dnsv6-server server-1 '2001:db8::' + set service ipoe-server dnsv6-server server-2 '2001:db8:aaa::' + set service ipoe-server dnsv6-server server-3 '2001:db8:bbb::' + set service ipoe-server interface eth3 client-subnet '192.168.1.0/24' + +.. code-block:: none + + vyos@ipoe-server# run sh ipoe-server sessions + ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid + -------+------------+-------------------+-------------+---------------------------------+-----------------+------------+--------+----------+------------------ + ipoe0 | eth3 | 08:00:27:2f:d8:06 | 192.168.1.2 | 2001:db8::a00:27ff:fe2f:d806/64 | 2001:db8:1::/56 | | active | 01:02:59 | 4626faf71b12cc25 + + +The clients :abbr:`CPE (Customer Premises Equipment)` can now communicate via +IPv4 or IPv6. All devices behind ``2001:db8::a00:27ff:fe2f:d806/64`` can use +addresses from ``2001:db8:1::/56`` and can globally communicate without the +need of any NAT rules. + +Automatic VLAN creation +----------------------- + +To create VLANs per user during runtime, the following settings are required on +a per interface basis. VLAN ID and VLAN range can be present in the +configuration at the same time. + +.. code-block:: none + + set service ipoe-server interface eth2 network vlan + set service ipoe-server interface eth2 vlan-id 100 + set service ipoe-server interface eth2 vlan-id 200 + set service ipoe-server interface eth2 vlan-range 1000-2000 + set service ipoe-server interface eth2 vlan-range 2500-2700 + +RADIUS Setup +------------ + +To use a RADIUS server for authentication and bandwidth-shaping, the following +example configuration can be used. + +.. code-block:: none + + set service ipoe-server authentication mode 'radius' + set service ipoe-server authentication radius-server 10.100.100.1 secret 'password' + +Bandwidth Shaping +================= + +Bandwidth rate limits can be set for local users within the configuration or +via RADIUS based attributes. + +Bandwidth Shaping for local users +--------------------------------- + +The rate-limit is set in kbit/sec. + +.. code-block:: none + + set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit download '500' + set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit upload '500' + set service ipoe-server authentication mode 'local' + set service ipoe-server dns-server server-1 '8.8.8.8' + set service ipoe-server dns-server server-2 '8.8.4.4' + set service ipoe-server interface eth2 client-subnet '192.168.0.0/24' + +.. code-block:: none + + vyos@vyos# run show ipoe-server sessions + + ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid + -------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------ + ipoe0 | eth2 | 08:00:27:2f:d8:06 | 192.168.0.2 | | | 500/500 | active | 00:00:05 | dccc870fd31349fb + +.. include:: /_include/common-references.txt |