diff options
Diffstat (limited to 'docs/configuration/service/ipoe-server.rst')
| -rw-r--r-- | docs/configuration/service/ipoe-server.rst | 17 |
1 files changed, 8 insertions, 9 deletions
diff --git a/docs/configuration/service/ipoe-server.rst b/docs/configuration/service/ipoe-server.rst index 64048552..ef06bcd5 100644 --- a/docs/configuration/service/ipoe-server.rst +++ b/docs/configuration/service/ipoe-server.rst @@ -26,13 +26,13 @@ functionality as PPPoE, but in a less robust manner. Configuring IPoE Server *********************** -IPoE can be configure on different interfaces, it will depend on each specific -situation which interface will provide IPoE to clients. The clients mac address +IPoE can be configured on different interfaces, it will depend on each specific +situation which interface will provide IPoE to clients. The client's mac address and the incoming interface is being used as control parameter, to authenticate a client. The example configuration below will assign an IP to the client on the incoming -interface eth2 with the client mac address 08:00:27:2f:d8:06. Other DHCP +interface eth1 with the client mac address 00:50:79:66:68:00. Other DHCP discovery requests will be ignored, unless the client mac has been enabled in the configuration. @@ -85,12 +85,11 @@ the configuration. .. cfgcmd:: set service ipoe-server interface <interface> mode <l2 | l3> - Set authentication backend. The configured authentication backend is used - for all queries. + Specifies the client connectivity mode. * **l2**: It means that clients are on same network where interface is.**(default)** - * **local**: It means that client are behind some router. + * **l3**: It means that client are behind some router. .. cfgcmd:: set service ipoe-server interface <interface> network <shared | vlan> @@ -279,7 +278,7 @@ IPv6 .. code-block:: none set service ipoe-server client-ipv6-pool IPv6-POOL delegate '2001:db8:8003::/48' delegation-prefix '56' - set service ipoe-server client-ipv6-pool IPV6-POOL prefix '2001:db8:8002::/48' mask '64' + set service ipoe-server client-ipv6-pool IPv6-POOL prefix '2001:db8:8002::/48' mask '64' set service ipoe-server default-ipv6-pool IPv6-POOL ********* @@ -434,7 +433,7 @@ Toubleshooting .. code-block:: none - vyos@vyos:~$sudo journalctl -u accel-ppp@ipoe -b 0 + vyos@vyos:~$ show log ipoe-server Feb 27 14:29:27 vyos accel-ipoe[2262]: eth1.100:: recv [DHCPv4 Discover xid=55df9228 chaddr=0c:98:bd:b8:00:01 <Message-Type Discover> <Request-IP 192.168.0.3> <Host-Name vyos> <Request-List Subnet,Broadcast,Router,DNS,Classless-Route,Domain-Name,MTU>] Feb 27 14:29:27 vyos accel-ipoe[2262]: eth1.100:eth1.100: eth1.100: authentication succeeded @@ -447,4 +446,4 @@ Toubleshooting .. include:: /_include/common-references.txt .. _dictionary: https://github.com/accel-ppp/accel-ppp/blob/master/accel-pppd/radius/dict/dictionary.rfc6911 -.. _`ACCEL-PPP attribute`: https://github.com/accel-ppp/accel-ppp/blob/master/accel-pppd/radius/dict/dictionary.accel
\ No newline at end of file +.. _`ACCEL-PPP attribute`: https://github.com/accel-ppp/accel-ppp/blob/master/accel-pppd/radius/dict/dictionary.accel |