diff options
Diffstat (limited to 'docs/configuration/service/snmp.rst')
| -rw-r--r-- | docs/configuration/service/snmp.rst | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/docs/configuration/service/snmp.rst b/docs/configuration/service/snmp.rst new file mode 100644 index 00000000..3f445ea8 --- /dev/null +++ b/docs/configuration/service/snmp.rst @@ -0,0 +1,266 @@ +.. _snmp: + +#### +SNMP +#### + +:abbr:`SNMP (Simple Network Management Protocol)` is an Internet Standard +protocol for collecting and organizing information about managed devices on +IP networks and for modifying that information to change device behavior. +Devices that typically support SNMP include cable modems, routers, switches, +servers, workstations, printers, and more. + +SNMP is widely used in network management for network monitoring. SNMP exposes +management data in the form of variables on the managed systems organized in +a management information base (MIB_) which describe the system status and +configuration. These variables can then be remotely queried (and, in some +circumstances, manipulated) by managing applications. + +Three significant versions of SNMP have been developed and deployed. SNMPv1 is +the original version of the protocol. More recent versions, SNMPv2c and SNMPv3, +feature improvements in performance, flexibility and security. + +SNMP is a component of the Internet Protocol Suite as defined by the Internet +Engineering Task Force (IETF). It consists of a set of standards for network +management, including an application layer protocol, a database schema, and a +set of data objects. + +Overview and basic concepts +=========================== + +In typical uses of SNMP, one or more administrative computers called managers +have the task of monitoring or managing a group of hosts or devices on a +computer network. Each managed system executes a software component called an +agent which reports information via SNMP to the manager. + +An SNMP-managed network consists of three key components: + +* Managed devices +* Agent - software which runs on managed devices +* Network management station (NMS) - software which runs on the manager + +A managed device is a network node that implements an SNMP interface that +allows unidirectional (read-only) or bidirectional (read and write) access to +node-specific information. Managed devices exchange node-specific information +with the NMSs. Sometimes called network elements, the managed devices can be +any type of device, including, but not limited to, routers, access servers, +switches, cable modems, bridges, hubs, IP telephones, IP video cameras, +computer hosts, and printers. + +An agent is a network-management software module that resides on a managed +device. An agent has local knowledge of management information and translates +that information to or from an SNMP-specific form. + +A network management station executes applications that monitor and control +managed devices. NMSs provide the bulk of the processing and memory resources +required for network management. One or more NMSs may exist on any managed +network. + +.. figure:: /_static/images/service_snmp_communication_principles_diagram.png + :scale: 20 % + :alt: Principle of SNMP Communication + + Image thankfully borrowed from + https://en.wikipedia.org/wiki/File:SNMP_communication_principles_diagram.PNG + which is under the GNU Free Documentation License + +.. note:: VyOS SNMP supports both IPv4 and IPv6. + +SNMP Protocol Versions +====================== + +VyOS itself supports SNMPv2_ (version 2) and SNMPv3_ (version 3) where the +later is recommended because of improved security (optional authentication and +encryption). + +SNMPv2 +------ + +SNMPv2 is the original and most commonly used version. For authorizing clients, +SNMP uses the concept of communities. Communities may have authorization set +to read only (this is most common) or to read and write (this option is not +actively used in VyOS). + +SNMP can work synchronously or asynchronously. In synchronous communication, +the monitoring system queries the router periodically. In asynchronous, the +router sends notification to the "trap" (the monitoring host). + +SNMPv2 does not support any authentication mechanisms, other than client source +address, so you should specify addresses of clients allowed to monitor the +router. Note that SNMPv2 also supports no encryption and always sends data in +plain text. + +Example +^^^^^^^ + +.. code-block:: none + + # Define a community + set service snmp community routers authorization ro + + # Allow monitoring access from the entire network + set service snmp community routers network 192.0.2.0/24 + set service snmp community routers network 2001::db8:ffff:eeee::/64 + + # Allow monitoring access from specific addresses + set service snmp community routers client 203.0.113.10 + set service snmp community routers client 203.0.113.20 + + # Define optional router information + set service snmp location "UK, London" + set service snmp contact "admin@example.com" + + # Trap target if you want asynchronous communication + set service snmp trap-target 203.0.113.10 + + # Listen only on specific IP addresses (port defaults to 161) + set service snmp listen-address 172.16.254.36 port 161 + set service snmp listen-address 2001:db8::f00::1 + + +SNMPv3 +------ + +SNMPv3 (version 3 of the SNMP protocol) introduced a whole slew of new security +related features that have been missing from the previous versions. Security +was one of the biggest weakness of SNMP until v3. Authentication in SNMP +Versions 1 and 2 amounts to nothing more than a password (community string) +sent in clear text between a manager and agent. Each SNMPv3 message contains +security parameters which are encoded as an octet string. The meaning of these +security parameters depends on the security model being used. + +The securityapproach in v3 targets: + +* Confidentiality – Encryption of packets to prevent snooping by an + unauthorized source. + +* Integrity – Message integrity to ensure that a packet has not been tampered + while in transit including an optional packet replay protection mechanism. + +* Authentication – to verify that the message is from a valid source. + +Example +^^^^^^^ + +* Let SNMP daemon listen only on IP address 192.0.2.1 +* Configure new SNMP user named "vyos" with password "vyos12345678" +* New user will use SHA/AES for authentication and privacy + +.. code-block:: none + + set service snmp listen-address 192.0.2.1 + set service snmp location 'VyOS Datacenter' + set service snmp v3 engineid '000000000000000000000002' + set service snmp v3 group default mode 'ro' + set service snmp v3 group default view 'default' + set service snmp v3 user vyos auth plaintext-password 'vyos12345678' + set service snmp v3 user vyos auth type 'sha' + set service snmp v3 user vyos group 'default' + set service snmp v3 user vyos privacy plaintext-password 'vyos12345678' + set service snmp v3 user vyos privacy type 'aes' + set service snmp v3 view default oid 1 + +After commit the plaintext passwords will be hashed and stored in your +configuration. The resulting LCI config will look like: + +.. code-block:: none + + vyos@vyos# show service snmp + listen-address 172.18.254.201 { + } + location "Wuerzburg, Dr.-Georg-Fuchs-Str. 8" + v3 { + engineid 000000000000000000000002 + group default { + mode ro + view default + } + user vyos { + auth { + encrypted-password 4e52fe55fd011c9c51ae2c65f4b78ca93dcafdfe + type sha + } + group default + privacy { + encrypted-password 4e52fe55fd011c9c51ae2c65f4b78ca93dcafdfe + type aes + } + } + view default { + oid 1 { + } + } + } + +You can test the SNMPv3 functionality from any linux based system, just run the +following command: ``snmpwalk -v 3 -u vyos -a SHA -A vyos12345678 -x AES +-X vyos12345678 -l authPriv 192.0.2.1 .1`` + +VyOS MIBs +========= + +All SNMP MIBs are located in each image of VyOS here: ``/usr/share/snmp/mibs/`` + +you are be able to download the files with the a activate ssh service like this + +.. code-block:: none + + scp -r vyos@your_router:/usr/share/snmp/mibs /your_folder/mibs + +SNMP Extensions +=============== + +To extend SNMP agent functionality, custom scripts can be executed every time +the agent is being called. This can be achieved by using +``arbitrary extensioncommands``. The first step is to create a functional +script of course, then upload it to your VyOS instance via the command +``scp your_script.sh vyos@your_router:/config/user-data``. +Once the script is uploaded, it needs to be configured via the command below. + + +.. code-block:: none + + set service snmp script-extensions extension-name my-extension script your_script.sh + commit + + +The OID ``.1.3.6.1.4.1.8072.1.3.2.3.1.1.4.116.101.115.116``, once called, will +contain the output of the extension. + +.. code-block:: none + + root@vyos:/home/vyos# snmpwalk -v2c -c public 127.0.0.1 nsExtendOutput1 + NET-SNMP-EXTEND-MIB::nsExtendOutput1Line."my-extension" = STRING: hello + NET-SNMP-EXTEND-MIB::nsExtendOutputFull."my-extension" = STRING: hello + NET-SNMP-EXTEND-MIB::nsExtendOutNumLines."my-extension" = INTEGER: 1 + NET-SNMP-EXTEND-MIB::nsExtendResult."my-extension" = INTEGER: 0 + +SolarWinds +========== + +If you happen to use SolarWinds Orion as NMS you can also use the Device +Templates Management. A template for VyOS can be easily imported. + +Create a file named ``VyOS-1.3.6.1.4.1.44641.ConfigMgmt-Commands`` using the +following content: + +.. code-block:: none + + <Configuration-Management Device="VyOS" SystemOID="1.3.6.1.4.1.44641"> + <Commands> + <Command Name="Reset" Value="set terminal width 0${CRLF}set terminal length 0"/> + <Command Name="Reboot" Value="reboot${CRLF}Yes"/> + <Command Name="EnterConfigMode" Value="configure"/> + <Command Name="ExitConfigMode" Value="commit${CRLF}exit"/> + <Command Name="DownloadConfig" Value="show configuration commands"/> + <Command Name="SaveConfig" Value="commit${CRLF}save"/> + <Command Name="Version" Value="show version"/> + <Command Name="MenuBased" Value="False"/> + <Command Name="VirtualPrompt" Value=":~"/> + </Commands> + </Configuration-Management> + +.. _MIB: https://en.wikipedia.org/wiki/Management_information_base +.. _SNMPv2: https://en.wikipedia.org/wiki/Simple_Network_Management_Protocol#Version_2 +.. _SNMPv3: https://en.wikipedia.org/wiki/Simple_Network_Management_Protocol#Version_3 + |