summaryrefslogtreecommitdiff
path: root/docs/configuration/trafficpolicy
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configuration/trafficpolicy')
-rw-r--r--docs/configuration/trafficpolicy/index.rst263
1 files changed, 128 insertions, 135 deletions
diff --git a/docs/configuration/trafficpolicy/index.rst b/docs/configuration/trafficpolicy/index.rst
index b008a8d9..93f69f80 100644
--- a/docs/configuration/trafficpolicy/index.rst
+++ b/docs/configuration/trafficpolicy/index.rst
@@ -130,13 +130,13 @@ configuring it.
.. note:: The meaning of the Class ID is not the same for every type of
policy. Normally policies just need a meaningless number to identify
a class (Class ID), but that does not apply to every policy.
- The the number of a class in a Priority Queue it does not only
+ The number of a class in a Priority Queue it does not only
identify it, it also defines its priority.
.. code-block:: none
- set traffic-policy <policy> <policy-name> class <class-ID> match <class-matching-rule-name>
+ set qos policy <policy> <policy-name> class <class-ID> match <class-matching-rule-name>
In the command above, we set the type of policy we are going to
@@ -148,8 +148,8 @@ A class can have multiple match filters:
.. code-block:: none
- set traffic-policy shaper MY-SHAPER class 30 match HTTP
- set traffic-policy shaper MY-SHAPER class 30 match HTTPs
+ set qos policy shaper MY-SHAPER class 30 match HTTP
+ set qos policy shaper MY-SHAPER class 30 match HTTPs
A match filter can contain multiple criteria and will match traffic if
all those criteria are true.
@@ -158,8 +158,8 @@ For example:
.. code-block:: none
- set traffic-policy shaper MY-SHAPER class 30 match HTTP ip protocol tcp
- set traffic-policy shaper MY-SHAPER class 30 match HTTP ip source port 80
+ set qos policy shaper MY-SHAPER class 30 match HTTP ip protocol tcp
+ set qos policy shaper MY-SHAPER class 30 match HTTP ip source port 80
This will match TCP traffic with source port 80.
@@ -181,13 +181,13 @@ different parameters you can configure.
.. code-block:: none
- vyos@vyos# set traffic-policy shaper MY-SHAPER class 30 match MY-FIRST-FILTER
+ vyos@vyos# set qos policy shaper MY-SHAPER class 30 match MY-FIRST-FILTER
Possible completions:
- description Description for this match
+ description Description
> ether Ethernet header match
- interface Interface name for this match
+ interface Interface to use
> ip Match IP protocol header
- > ipv6 Match IPV6 header
+ > ipv6 Match IPV6 protocol header
mark Match on mark applied by firewall
vif Virtual Local Area Network (VLAN) ID for this match
@@ -201,7 +201,7 @@ You can also write a description for a filter:
.. code-block:: none
- set traffic-policy shaper MY-SHAPER class 30 match MY-FIRST-FILTER description "My filter description"
+ set qos policy shaper MY-SHAPER class 30 match MY-FIRST-FILTER description "My filter description"
@@ -233,25 +233,25 @@ possibilities depending on the Traffic Policy you are configuring.
.. code-block:: none
- vyos@vyos# set traffic-policy shaper MY-SHAPER class 30
+ vyos@vyos# set qos policy shaper MY-SHAPER class 30
Possible completions:
- bandwidth Bandwidth used for this class
- burst Burst size for this class (default: 15kb)
+ bandwidth Available bandwidth for this policy (default: auto)
+ burst Burst size for this class (default: 15k)
ceiling Bandwidth limit for this class
codel-quantum
- fq-codel - Number of bytes used as 'deficit' (default 1514)
- description Description for this traffic class
- flows fq-codel - Number of flows (default 1024)
- interval fq-codel - Interval (milliseconds) used to measure the delay (default 100)
+ Deficit in the fair queuing algorithm (default 1514)
+ description Description
+ flows Number of flows into which the incoming packets are classified(default 1024)
+ interval Interval used to measure the delay (default 100)
+> match Class matching rule name
- priority Priority for usage of excess bandwidth
- queue-limit Maximum queue size (packets)
- queue-type Queue type for this class
+ priority Priority for rule evaluation
+ queue-limit Maximum queue size
+ queue-type Queue type for default traffic (default: fq-codel)
set-dscp Change the Differentiated Services (DiffServ) field in the IP header
- target fq-codel - Acceptable minimum queue delay (milliseconds)
+ target Acceptable minimum standing/persistent queue delay (default: 5)
-For instance, with :code:`set traffic-policy shaper MY-SHAPER
+For instance, with :code:`set qos policy shaper MY-SHAPER
class 30 set-dscp EF` you would be modifying the DSCP field value of packets in
that class to Expedite Forwarding.
@@ -316,9 +316,9 @@ setting.
.. code-block:: none
- set traffic-policy shaper FQ-SHAPER bandwidth 4gbit
- set traffic-policy shaper FQ-SHAPER default bandwidth 100%
- set traffic-policy shaper FQ-SHAPER default queue-type fq-codel
+ set qos policy shaper FQ-SHAPER bandwidth 4gbit
+ set qos policy shaper FQ-SHAPER default bandwidth 100%
+ set qos policy shaper FQ-SHAPER default queue-type fq-codel
As shown in the last command of the example above, the `queue-type`
setting allows these combinations. You will be able to use it
@@ -372,7 +372,7 @@ This is the policy that requieres the lowest resources for the same
amount of traffic. But **very likely you do not need it as you cannot
get much from it. Sometimes it is used just to enable logging.**
-.. cfgcmd:: set traffic-policy drop-tail <policy-name> queue-limit
+.. cfgcmd:: set qos policy drop-tail <policy-name> queue-limit
<number-of-packets>
Use this command to configure a drop-tail policy (PFIFO). Choose a
@@ -393,7 +393,7 @@ fairness so that each flow is able to send data in turn, preventing any
single one from drowning out the rest.
-.. cfgcmd:: set traffic-policy fair-queue <policy-name>
+.. cfgcmd:: set qos policy fair-queue <policy-name>
Use this command to create a Fair-Queue policy and give it a name.
It is based on the Stochastic Fairness Queueing and can be applied to
@@ -411,7 +411,7 @@ packet reordering to occur. An advisable value could be 10 seconds.
One of the uses of Fair Queue might be the mitigation of Denial of
Service attacks.
-.. cfgcmd:: set traffic-policy fair-queue <policy-name> hash-interval <seconds>`
+.. cfgcmd:: set qos policy fair-queue <policy-name> hash-interval <seconds>
Use this command to define a Fair-Queue policy, based on the
Stochastic Fairness Queueing, and set the number of seconds at which
@@ -420,7 +420,7 @@ Service attacks.
When dequeuing, each hash-bucket with data is queried in a round robin
fashion. You can configure the length of the queue.
-.. cfgcmd:: set traffic-policy fair-queue <policy-name> queue-limit <limit>
+.. cfgcmd:: set qos policy fair-queue <policy-name> queue-limit <limit>
Use this command to define a Fair-Queue policy, based on the
Stochastic Fairness Queueing, and set the number of maximum packets
@@ -492,33 +492,33 @@ being ok) you may also want to increase `target` to something like 15ms
and increase `interval` to something around 150 ms.
-.. cfgcmd:: set traffic-policy fq-codel <policy name> codel-quantum <bytes>
+.. cfgcmd:: set qos policy fq-codel <policy name> codel-quantum <bytes>
Use this command to configure an fq-codel policy, set its name and
the maximum number of bytes (default: 1514) to be dequeued from a
queue at once.
-.. cfgcmd:: set traffic-policy fq-codel <policy name> flows <number-of-flows>
+.. cfgcmd:: set qos policy fq-codel <policy name> flows <number-of-flows>
Use this command to configure an fq-codel policy, set its name and
the number of sub-queues (default: 1024) into which packets are
classified.
-.. cfgcmd:: set traffic-policy fq-codel <policy name> interval <miliseconds>
+.. cfgcmd:: set qos policy fq-codel <policy name> interval <miliseconds>
Use this command to configure an fq-codel policy, set its name and
the time period used by the control loop of CoDel to detect when a
persistent queue is developing, ensuring that the measured minimum
delay does not become too stale (default: 100ms).
-.. cfgcmd:: set traffic-policy fq-codel <policy-name> queue-limit
- <number-of-packets>`
+.. cfgcmd:: set qos policy fq-codel <policy-name> queue-limit
+ <number-of-packets>
Use this command to configure an fq-codel policy, set its name, and
define a hard limit on the real queue size. When this limit is
reached, new packets are dropped (default: 10240 packets).
-.. cfgcmd:: set traffic-policy fq-codel <policy-name> target <miliseconds>`
+.. cfgcmd:: set qos policy fq-codel <policy-name> target <miliseconds>
Use this command to configure an fq-codel policy, set its name, and
define the acceptable minimum standing/persistent queue delay. This
@@ -534,9 +534,9 @@ A simple example of an FQ-CoDel policy working inside a Shaper one.
.. code-block:: none
- set traffic-policy shaper FQ-CODEL-SHAPER bandwidth 2gbit
- set traffic-policy shaper FQ-CODEL-SHAPER default bandwidth 100%
- set traffic-policy shaper FQ-CODEL-SHAPER default queue-type fq-codel
+ set qos policy shaper FQ-CODEL-SHAPER bandwidth 2gbit
+ set qos policy shaper FQ-CODEL-SHAPER default bandwidth 100%
+ set qos policy shaper FQ-CODEL-SHAPER default queue-type fq-codel
@@ -565,7 +565,7 @@ the configured classes.
**inbound** traffic, check the ingress-shaping_ section.
-.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> match
+.. cfgcmd:: set qos policy limiter <policy-name> class <class ID> match
<match-name> description <description>
Use this command to configure an Ingress Policer, defining its name,
@@ -577,7 +577,7 @@ Once the matching rules are set for a class, you can start configuring
how you want matching traffic to behave.
-.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> bandwidth
+.. cfgcmd:: set qos policy limiter <policy-name> class <class-ID> bandwidth
<rate>
Use this command to configure an Ingress Policer, defining its name,
@@ -585,7 +585,7 @@ how you want matching traffic to behave.
this class.
-.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> burst
+.. cfgcmd:: set qos policy limiter <policy-name> class <class-ID> burst
<burst-size>
Use this command to configure an Ingress Policer, defining its name,
@@ -593,19 +593,19 @@ how you want matching traffic to behave.
class (default: 15).
-.. cfgcmd:: set traffic-policy limiter <policy-name> default bandwidth <rate>
+.. cfgcmd:: set qos policy limiter <policy-name> default bandwidth <rate>
Use this command to configure an Ingress Policer, defining its name
and the maximum allowed bandwidth for its default policy.
-.. cfgcmd:: set traffic-policy limiter <policy-name> default burst <burst-size>
+.. cfgcmd:: set qos policy limiter <policy-name> default burst <burst-size>
Use this command to configure an Ingress Policer, defining its name
and the burst size in bytes (default: 15) for its default policy.
-.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> priority
+.. cfgcmd:: set qos policy limiter <policy-name> class <class ID> priority
<value>
Use this command to configure an Ingress Policer, defining its name,
@@ -629,13 +629,13 @@ This could be helpful if you want to test how an application behaves
under certain network conditions.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> bandwidth <rate>
+.. cfgcmd:: set qos policy network-emulator <policy-name> bandwidth <rate>
Use this command to configure the maximum rate at which traffic will
be shaped in a Network Emulator policy. Define the name of the policy
and the rate.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> burst <burst-size>
+.. cfgcmd:: set qos policy network-emulator <policy-name> burst <burst-size>
Use this command to configure the burst size of the traffic in a
Network Emulator policy. Define the name of the Network Emulator
@@ -643,7 +643,7 @@ under certain network conditions.
Token Bucket Filter qdisc). Default:15kb. It will only take effect if
you have configured its bandwidth too.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> network-delay
+.. cfgcmd:: set qos policy network-emulator <policy-name> delay
<delay>
Use this command to configure a Network Emulator policy defining its
@@ -653,7 +653,7 @@ under certain network conditions.
configured its bandwidth too. You can use secs, ms and us. Default:
50ms.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-corruption
+.. cfgcmd:: set qos policy network-emulator <policy-name> corruption
<percent>
Use this command to emulate noise in a Network Emulator policy. Set
@@ -661,14 +661,14 @@ under certain network conditions.
random error will be introduced in a random position for the chosen
percent of packets.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-loss
+.. cfgcmd:: set qos policy network-emulator <policy-name> loss
<percent>
Use this command to emulate packet-loss conditions in a Network
Emulator policy. Set the policy name and the percentage of loss
packets your traffic will suffer.
-.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-reordering
+.. cfgcmd:: set traffic-policy network-emulator <policy-name> reordering
<percent>
Use this command to emulate packet-reordering conditions in a Network
@@ -720,13 +720,13 @@ for your classes:
.. code-block:: none
- vyos@vyos# set traffic-policy priority-queue MY-PRIO class 3 match MY-MATCH-RULE
+ vyos@vyos# set qos policy priority-queue MY-PRIO class 3 match MY-MATCH-RULE
Possible completions:
- description Description for this match
+ description Description
> ether Ethernet header match
- interface Interface name for this match
+ interface Interface to use
> ip Match IP protocol header
- > ipv6 Match IPV6 header
+ > ipv6 Match IPV6 protocol header
mark Match on mark applied by firewall
vif Virtual Local Area Network (VLAN) ID for this match
@@ -737,18 +737,18 @@ setting:
.. code-block:: none
- vyos@vyos# set traffic-policy priority-queue MY-PRIO class 3 queue-type
+ vyos@vyos# set qos policy priority-queue MY-PRIO class 3 queue-type
Possible completions:
+ drop-tail First-In-First-Out (FIFO) (default)
fq-codel Fair Queue Codel
fair-queue Stochastic Fair Queue (SFQ)
- drop-tail First-In-First-Out (FIFO)
- priority Priority queueing based on DSCP
+ priority Priority queueing
random-detect
Random Early Detection (RED)
-.. cfgcmd:: set traffic-policy priority-queue <policy-name> class <class-ID>
- queue-limit <limit>`
+.. cfgcmd:: set qos policy priority-queue <policy-name> class <class-ID>
+ queue-limit <limit>
Use this command to configure a Priority Queue policy, set its name,
set a class with a priority from 1 to 7 and define a hard limit on
@@ -809,7 +809,7 @@ algorithm might be to prevent a backbone overload. But only for TCP
(because dropped packets could be retransmitted), not for UDP.
-.. cfgcmd:: set traffic-policy random-detect <policy-name> bandwidth <bandwidth>
+.. cfgcmd:: set qos policy random-detect <policy-name> bandwidth <bandwidth>
Use this command to configure a Random-Detect policy, set its name
and set the available bandwidth for this policy. It is used for
@@ -817,7 +817,7 @@ algorithm might be to prevent a backbone overload. But only for TCP
set to the bandwidth of your interface. Random Detect is not a
shaping policy, this command will not shape.
-.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence
+.. cfgcmd:: set qos policy random-detect <policy-name> precedence
<IP-precedence-value> average-packet <bytes>
Use this command to configure a Random-Detect policy and set its
@@ -828,7 +828,7 @@ algorithm might be to prevent a backbone overload. But only for TCP
.. note:: When configuring a Random-Detect policy: **the higher the
precedence number, the higher the priority**.
-.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence
+.. cfgcmd:: set qos policy random-detect <policy-name> precedence
<IP-precedence-value> mark-probability <value>
Use this command to configure a Random-Detect policy and set its
@@ -837,7 +837,7 @@ algorithm might be to prevent a backbone overload. But only for TCP
probability by giving the N value of the fraction 1/N (default: 10).
-.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence
+.. cfgcmd:: set qos policy random-detect <policy-name> precedence
<IP-precedence-value> maximum-threshold <packets>
Use this command to configure a Random-Detect policy and set its
@@ -846,7 +846,7 @@ algorithm might be to prevent a backbone overload. But only for TCP
be (from 0 to 4096 packets, default: 18). At this size, the marking
(drop) probability is maximal.
-.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence
+.. cfgcmd:: set qos policy random-detect <policy-name> precedence
<IP-precedence-value> minimum-threshold <packets>
Use this command to configure a Random-Detect policy and set its
@@ -879,7 +879,7 @@ The default values for the minimum-threshold depend on IP precedence:
+------------+-----------------------+
-.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence
+.. cfgcmd:: set qos policy random-detect <policy-name> precedence
<IP-precedence-value> queue-limit <packets>
Use this command to configure a Random-Detect policy and set its
@@ -925,12 +925,12 @@ Rate-Control traffic is stocked with tokens which correspond to the
amount of traffic that can be burst in one go. Tokens arrive at a steady
rate, until the bucket is full.
-.. cfgcmd:: set traffic-policy rate-control <policy-name> bandwidth <rate>
+.. cfgcmd:: set qos policy rate-control <policy-name> bandwidth <rate>
Use this command to configure a Rate-Control policy, set its name
and the rate limit you want to have.
-.. cfgcmd:: set traffic-policy rate-control <policy-name> burst <burst-size>
+.. cfgcmd:: set qos policy rate-control <policy-name> burst <burst-size>
Use this command to configure a Rate-Control policy, set its name
and the size of the bucket in bytes which will be available for
@@ -942,7 +942,7 @@ buffer if you want to reach your configured rate.
A very small buffer will soon start dropping packets.
-.. cfgcmd:: set traffic-policy rate-control <policy-name> latency
+.. cfgcmd:: set qos policy rate-control <policy-name> latency
Use this command to configure a Rate-Control policy, set its name
and the maximum amount of time a packet can be queued (default: 50
@@ -981,14 +981,14 @@ At every round, the deficit counter adds the quantum so that even large
packets will have their opportunity to be dequeued.
-.. cfgcmd:: set traffic-policy round-robin <policy name> class
+.. cfgcmd:: set qos policy round-robin <policy name> class
<class-ID> quantum <packets>
Use this command to configure a Round-Robin policy, set its name, set
a class ID, and the quantum for that class. The deficit counter will
add that value each round.
-.. cfgcmd:: set traffic-policy round-robin <policy name> class
+.. cfgcmd:: set qos policy round-robin <policy name> class
<class ID> queue-limit <packets>
Use this command to configure a Round-Robin policy, set its name, set
@@ -999,12 +999,14 @@ class through the ``queue-type`` setting.
.. code-block:: none
- vyos@vyos# set traffic-policy round-robin DRR class 10 queue-type
+ vyos@vyos# set qos policy round-robin DRR class 10 queue-type
Possible completions:
+ drop-tail First-In-First-Out (FIFO) (default)
fq-codel Fair Queue Codel
fair-queue Stochastic Fair Queue (SFQ)
- drop-tail First-In-First-Out (FIFO)
- priority Priority queueing based on DSCP
+ priority Priority queueing based
+ random-detect
+ Random Early Detection (RED)
@@ -1035,34 +1037,34 @@ allocated. Priority can be any number from 0 to 7. The lower the number,
the higher the priority.
-.. cfgcmd:: set traffic-policy shaper <policy-name> bandwidth <rate>
+.. cfgcmd:: set qos policy shaper <policy-name> bandwidth <rate>
Use this command to configure a Shaper policy, set its name
and the maximum bandwidth for all combined traffic.
-.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> bandwidth
+.. cfgcmd:: set qos policy shaper <policy-name> class <class-ID> bandwidth
<rate>
Use this command to configure a Shaper policy, set its name, define
a class and set the guaranteed traffic you want to allocate to that
class.
-.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> burst
+.. cfgcmd:: set qos policy shaper <policy-name> class <class-ID> burst
<bytes>
Use this command to configure a Shaper policy, set its name, define
a class and set the size of the `tocken bucket`_ in bytes, which will
be available to be sent at ceiling speed (default: 15Kb).
-.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> ceiling
+.. cfgcmd:: set qos policy shaper <policy-name> class <class-ID> ceiling
<bandwidth>
Use this command to configure a Shaper policy, set its name, define
a class and set the maximum speed possible for this class. The
default ceiling value is the bandwidth value.
-.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> priority
+.. cfgcmd:: set qos policy shaper <policy-name> class <class-ID> priority
<0-7>
Use this command to configure a Shaper policy, set its name, define
@@ -1078,34 +1080,34 @@ parameters.
.. code-block:: none
- vyos@vyos# set traffic-policy shaper HTB class 10 queue-type
+ vyos@vyos# set qos policy shaper HTB class 10 queue-type
Possible completions:
- fq-codel Fair Queue Codel
+ fq-codel Fair Queue Codel (default)
fair-queue Stochastic Fair Queue (SFQ)
drop-tail First-In-First-Out (FIFO)
- priority Priority queueing based on DSCP
+ priority Priority queueing
random-detect
Random Early Detection (RED)
.. code-block:: none
- vyos@vyos# set traffic-policy shaper HTB class 10
+ vyos@vyos# set qos policy shaper HTB class 10
Possible completions:
- bandwidth Bandwidth used for this class
- burst Burst size for this class (default: 15kb)
+ bandwidth Available bandwidth for this policy (default: auto)
+ burst Burst size for this class (default: 15k)
ceiling Bandwidth limit for this class
codel-quantum
- fq-codel - Number of bytes used as 'deficit' (default 1514)
- description Description for this traffic class
- flows fq-codel - Number of flows (default 1024)
- interval fq-codel - Interval (milliseconds) used to measure the delay (default 100)
+ Deficit in the fair queuing algorithm (default 1514)
+ description Description
+ flows Number of flows into which the incoming packets are classified (default 1024)
+ interval Interval used to measure the delay (default 100)
+> match Class matching rule name
- priority Priority for usage of excess bandwidth
+ priority Priority for rule evaluation
queue-limit Maximum queue size (packets)
- queue-type Queue type for this class
+ queue-type Queue type for default traffic (default: fq-codel)
set-dscp Change the Differentiated Services (DiffServ) field in the IP header
- target fq-codel - Acceptable minimum queue delay (milliseconds)
+ target Acceptable minimum standing/persistent queue delay (default: 5)
@@ -1124,24 +1126,24 @@ A simple example of Shaper using priorities.
.. code-block:: none
- set traffic-policy shaper MY-HTB bandwidth '50mbit'
- set traffic-policy shaper MY-HTB class 10 bandwidth '20%'
- set traffic-policy shaper MY-HTB class 10 match DSCP ip dscp 'EF'
- set traffic-policy shaper MY-HTB class 10 queue-type 'fq-codel'
- set traffic-policy shaper MY-HTB class 20 bandwidth '10%'
- set traffic-policy shaper MY-HTB class 20 ceiling '50%'
- set traffic-policy shaper MY-HTB class 20 match PORT666 ip destination port '666'
- set traffic-policy shaper MY-HTB class 20 priority '3'
- set traffic-policy shaper MY-HTB class 20 queue-type 'fair-queue'
- set traffic-policy shaper MY-HTB class 30 bandwidth '10%'
- set traffic-policy shaper MY-HTB class 30 ceiling '50%'
- set traffic-policy shaper MY-HTB class 30 match ADDRESS30 ip source address '192.168.30.0/24'
- set traffic-policy shaper MY-HTB class 30 priority '5'
- set traffic-policy shaper MY-HTB class 30 queue-type 'fair-queue'
- set traffic-policy shaper MY-HTB default bandwidth '10%'
- set traffic-policy shaper MY-HTB default ceiling '100%'
- set traffic-policy shaper MY-HTB default priority '7'
- set traffic-policy shaper MY-HTB default queue-type 'fair-queue'
+ set qos policy shaper MY-HTB bandwidth '50mbit'
+ set qos policy shaper MY-HTB class 10 bandwidth '20%'
+ set qos policy shaper MY-HTB class 10 match DSCP ip dscp 'EF'
+ set qos policy shaper MY-HTB class 10 queue-type 'fq-codel'
+ set qos policy shaper MY-HTB class 20 bandwidth '10%'
+ set qos policy shaper MY-HTB class 20 ceiling '50%'
+ set qos policy shaper MY-HTB class 20 match PORT666 ip destination port '666'
+ set qos policy shaper MY-HTB class 20 priority '3'
+ set qos policy shaper MY-HTB class 20 queue-type 'fair-queue'
+ set qos policy shaper MY-HTB class 30 bandwidth '10%'
+ set qos policy shaper MY-HTB class 30 ceiling '50%'
+ set qos policy shaper MY-HTB class 30 match ADDRESS30 ip source address '192.168.30.0/24'
+ set qos policy shaper MY-HTB class 30 priority '5'
+ set qos policy shaper MY-HTB class 30 queue-type 'fair-queue'
+ set qos policy shaper MY-HTB default bandwidth '10%'
+ set qos policy shaper MY-HTB default ceiling '100%'
+ set qos policy shaper MY-HTB default priority '7'
+ set qos policy shaper MY-HTB default queue-type 'fair-queue'
Applying a traffic policy
@@ -1151,32 +1153,23 @@ Once a traffic-policy is created, you can apply it to an interface:
.. code-block:: none
- set interfaces etherhet eth0 traffic-policy out WAN-OUT
+ set qos interface eth0 egress WAN-OUT
You can only apply one policy per interface and direction, but you could
reuse a policy on different interfaces and directions:
.. code-block:: none
- set interfaces ethernet eth0 traffic-policy in WAN-IN
- set interfaces etherhet eth0 traffic-policy out WAN-OUT
- set interfaces etherhet eth1 traffic-policy in LAN-IN
- set interfaces etherhet eth1 traffic-policy out LAN-OUT
- set interfaces ethernet eth2 traffic-policy in LAN-IN
- set interfaces ethernet eth2 traffic-policy out LAN-OUT
- set interfaces etherhet eth3 traffic-policy in TWO-WAY-POLICY
- set interfaces etherhet eth3 traffic-policy out TWO-WAY-POLICY
- set interfaces etherhet eth4 traffic-policy in TWO-WAY-POLICY
- set interfaces etherhet eth4 traffic-policy out TWO-WAY-POLICY
-
-Getting queueing information
-----------------------------
-
-.. opcmd:: show queueing <interface-type> <interface-name>
-
- Use this command to see the queueing information for an interface.
- You will be able to see a packet counter (Sent, Dropped, Overlimit
- and Backlog) per policy and class configured.
+ set qos interface eth0 ingress WAN-IN
+ set qos interface eth0 egress WAN-OUT
+ set qos interface eth1 ingress LAN-IN
+ set qos interface eth1 egress LAN-OUT
+ set qos interface eth2 ingress LAN-IN
+ set qos interface eth2 egress LAN-OUT
+ set qos interface eth3 ingress TWO-WAY-POLICY
+ set qos interface eth3 egress TWO-WAY-POLICY
+ set qos interface eth4 ingress TWO-WAY-POLICY
+ set qos interface eth4 egress TWO-WAY-POLICY
@@ -1203,11 +1196,11 @@ That is how it is possible to do the so-called "ingress shaping".
.. code-block:: none
- set traffic-policy shaper MY-INGRESS-SHAPING bandwidth 1000kbit
- set traffic-policy shaper MY-INGRESS-SHAPING default bandwidth 1000kbit
- set traffic-policy shaper MY-INGRESS-SHAPING default queue-type fair-queue
+ set qos policy shaper MY-INGRESS-SHAPING bandwidth 1000kbit
+ set qos policy shaper MY-INGRESS-SHAPING default bandwidth 1000kbit
+ set qos policy shaper MY-INGRESS-SHAPING default queue-type fair-queue
- set interfaces input ifb0 traffic-policy out MY-INGRESS-SHAPING
+ set qos interface ifb0 egress MY-INGRESS-SHAPING
set interfaces ethernet eth0 redirect ifb0
.. warning::
@@ -1226,4 +1219,4 @@ That is how it is possible to do the so-called "ingress shaping".
.. _HFSC: https://en.wikipedia.org/wiki/Hierarchical_fair-service_curve
.. _Intermediate Functional Block: https://www.linuxfoundation.org/collaborate/workgroups/networking/ifb
-.. start_vyoslinter \ No newline at end of file
+.. start_vyoslinter
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 08:10:59 +0000