3 files changed, 21 insertions, 10 deletions
diff --git a/docs/configuration/vpn/l2tp.rst b/docs/configuration/vpn/l2tp.rst
index 26de47b3..4a7657e7 100644
--- a/docs/configuration/vpn/l2tp.rst
+++ b/docs/configuration/vpn/l2tp.rst
@@ -17,8 +17,8 @@ with native Windows and Mac VPN clients):
   set vpn ipsec interface eth0
 
   set vpn l2tp remote-access outside-address 192.0.2.2
-  set vpn l2tp remote-access client-ip-pool start 192.168.255.2
-  set vpn l2tp remote-access client-ip-pool stop 192.168.255.254
+  set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254
+  set vpn l2tp remote-access default-pool 'L2TP-POOL'
   set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret
   set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret <secret>
   set vpn l2tp remote-access authentication mode local
@@ -95,8 +95,8 @@ Below is an example to configure a LNS:
 .. code-block:: none
 
   set vpn l2tp remote-access outside-address 192.0.2.2
-  set vpn l2tp remote-access client-ip-pool start 192.168.255.2
-  set vpn l2tp remote-access client-ip-pool stop 192.168.255.254
+  set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254
+  set vpn l2tp remote-access default-pool 'L2TP-POOL'
   set vpn l2tp remote-access lns shared-secret 'secret'
   set vpn l2tp remote-access ccp-disable
   set vpn l2tp remote-access authentication mode local
@@ -122,8 +122,8 @@ The rate-limit is set in kbit/sec.
 .. code-block:: none
 
   set vpn l2tp remote-access outside-address 192.0.2.2
-  set vpn l2tp remote-access client-ip-pool start 192.168.255.2
-  set vpn l2tp remote-access client-ip-pool stop 192.168.255.254
+  set vpn l2tp remote-access client-ip-pool L2TP-POOL range 192.168.255.2-192.168.255.254
+  set vpn l2tp remote-access default-pool 'L2TP-POOL'
   set vpn l2tp remote-access authentication mode local
   set vpn l2tp remote-access authentication local-users username test password test
   set vpn l2tp remote-access authentication local-users username test rate-limit download 20480
diff --git a/docs/configuration/vpn/pptp.rst b/docs/configuration/vpn/pptp.rst
index 12364acb..fe536eec 100644
--- a/docs/configuration/vpn/pptp.rst
+++ b/docs/configuration/vpn/pptp.rst
@@ -20,8 +20,8 @@ server example
 
   set vpn pptp remote-access authentication local-users username test password 'test'
   set vpn pptp remote-access authentication mode 'local'
-  set vpn pptp remote-access client-ip-pool start '192.168.0.10'
-  set vpn pptp remote-access client-ip-pool stop '192.168.0.15'
+  set vpn pptp remote-access client-ip-pool PPTP-POOL range 192.168.0.10-192.168.0.15
+  set vpn pptp remote-access default-pool 'PPTP-POOL'
   set vpn pptp remote-access gateway-address '10.100.100.1'
   set vpn pptp remote-access outside-address '10.1.1.120'
 
diff --git a/docs/configuration/vpn/sstp.rst b/docs/configuration/vpn/sstp.rst
index f3e062fe..fa2b96c8 100644
--- a/docs/configuration/vpn/sstp.rst
+++ b/docs/configuration/vpn/sstp.rst
@@ -116,9 +116,20 @@ Configuration
   Specifies the port `<port>` that the SSTP port will listen on (default 443).
 
 
-.. cfgcmd:: set vpn sstp client-ip-pool subnet <subnet>
+.. cfgcmd:: set vpn sstp client-ip-pool <POOL-NAME> range <x.x.x.x-x.x.x.x | x.x.x.x/x>
 
-  Use `<subnet>` as the IP pool for all connecting clients.
+   Use this command to define the first IP address of a pool of
+   addresses to be given to SSTP clients. If notation ``x.x.x.x-x.x.x.x``,
+   it must be within a /24 subnet. If notation ``x.x.x.x/x`` is
+   used there is possibility to set host/netmask.
+
+.. cfgcmd:: set vpn sstp client-ip-pool <POOL-NAME> next-pool <NEXT-POOL-NAME>
+
+   Use this command to define the next address pool name.
+
+.. cfgcmd:: set vpn sstp default-pool <POOL-NAME>
+
+   Use this command to define default address pool name.
 
 
 .. cfgcmd:: set vpn sstp client-ipv6-pool prefix <address> mask <number-of-bits>