diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/nat/nat44.rst | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/docs/configuration/nat/nat44.rst b/docs/configuration/nat/nat44.rst index 9c1d1423..b42c6cfe 100644 --- a/docs/configuration/nat/nat44.rst +++ b/docs/configuration/nat/nat44.rst @@ -155,11 +155,11 @@ rule. .. code-block:: none - set nat source rule 20 outbound-interface interface-name eth0 - set nat source rule 30 outbound-interface interface-name bond1* - set nat source rule 20 outbound-interface interface-name !vtun2 - set nat source rule 20 outbound-interface interface-group GROUP1 - set nat source rule 20 outbound-interface interface-group !GROUP2 + set nat source rule 20 outbound-interface name eth0 + set nat source rule 30 outbound-interface name bond1* + set nat source rule 20 outbound-interface name !vtun2 + set nat source rule 20 outbound-interface group GROUP1 + set nat source rule 20 outbound-interface group !GROUP2 * **inbound-interface** - applicable only to :ref:`destination-nat`. It @@ -171,11 +171,11 @@ rule. .. code-block:: none - set nat destination rule 20 inbound-interface interface-name eth0 - set nat destination rule 30 inbound-interface interface-name bond1* - set nat destination rule 20 inbound-interface interface-name !vtun2 - set nat destination rule 20 inbound-interface interface-group GROUP1 - set nat destination rule 20 inbound-interface interface-group !GROUP2 + set nat destination rule 20 inbound-interface name eth0 + set nat destination rule 30 inbound-interface name bond1* + set nat destination rule 20 inbound-interface name !vtun2 + set nat destination rule 20 inbound-interface group GROUP1 + set nat destination rule 20 inbound-interface group !GROUP2 * **protocol** - specify which types of protocols this translation rule @@ -335,7 +335,7 @@ demonstrate the following configuration: .. code-block:: none - set nat source rule 100 outbound-interface interface-name 'eth0' + set nat source rule 100 outbound-interface name 'eth0' set nat source rule 100 source address '192.168.0.0/24' set nat source rule 100 translation address 'masquerade' @@ -345,7 +345,7 @@ Which generates the following configuration: rule 100 { outbound-interface { - interface-name eth0 + name eth0 } source { address 192.168.0.0/24 @@ -438,19 +438,19 @@ Example: set nat destination rule 100 description 'Regular destination NAT from external' set nat destination rule 100 destination port '3389' - set nat destination rule 100 inbound-interface interface-name 'pppoe0' + set nat destination rule 100 inbound-interface name 'pppoe0' set nat destination rule 100 protocol 'tcp' set nat destination rule 100 translation address '192.0.2.40' set nat destination rule 110 description 'NAT Reflection: INSIDE' set nat destination rule 110 destination port '3389' - set nat destination rule 110 inbound-interface interface-name 'eth0.10' + set nat destination rule 110 inbound-interface name 'eth0.10' set nat destination rule 110 protocol 'tcp' set nat destination rule 110 translation address '192.0.2.40' set nat source rule 110 description 'NAT Reflection: INSIDE' set nat source rule 110 destination address '192.0.2.0/24' - set nat source rule 110 outbound-interface interface-name 'eth0.10' + set nat source rule 110 outbound-interface name 'eth0.10' set nat source rule 110 protocol 'tcp' set nat source rule 110 source address '192.0.2.0/24' set nat source rule 110 translation address 'masquerade' @@ -467,7 +467,7 @@ Which results in a configuration of: port 3389 } inbound-interface { - interface-name pppoe0 + name pppoe0 } protocol tcp translation { @@ -480,7 +480,7 @@ Which results in a configuration of: port 3389 } inbound-interface { - interface-name eth0.10 + name eth0.10 } protocol tcp translation { @@ -495,7 +495,7 @@ Which results in a configuration of: address 192.0.2.0/24 } outbound-interface { - interface-name eth0.10 + name eth0.10 } protocol tcp source { @@ -535,7 +535,7 @@ Our configuration commands would be: set nat destination rule 10 description 'Port Forward: HTTP to 192.168.0.100' set nat destination rule 10 destination port '80' - set nat destination rule 10 inbound-interface interface-name 'eth0' + set nat destination rule 10 inbound-interface name 'eth0' set nat destination rule 10 protocol 'tcp' set nat destination rule 10 translation address '192.168.0.100' @@ -551,7 +551,7 @@ Which would generate the following NAT destination configuration: port 80 } inbound-interface { - interface-name eth0 + name eth0 } protocol tcp translation { @@ -634,10 +634,10 @@ and one external interface: set interfaces ethernet eth1 description 'Outside interface' set nat destination rule 2000 description '1-to-1 NAT example' set nat destination rule 2000 destination address '192.0.2.30' - set nat destination rule 2000 inbound-interface interface-name 'eth1' + set nat destination rule 2000 inbound-interface name 'eth1' set nat destination rule 2000 translation address '192.168.1.10' set nat source rule 2000 description '1-to-1 NAT example' - set nat source rule 2000 outbound-interface interface-name 'eth1' + set nat source rule 2000 outbound-interface name 'eth1' set nat source rule 2000 source address '192.168.1.10' set nat source rule 2000 translation address '192.0.2.30' @@ -679,7 +679,7 @@ We will generate the hash randomly. .. code-block:: none - set nat source rule 10 outbound-interface interface-name eth0 + set nat source rule 10 outbound-interface name eth0 set nat source rule 10 source address 10.0.0.0/8 set nat source rule 10 load-balance hash random set nat source rule 10 load-balance backend 192.0.2.251 weight 33 |