diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/vpn/site2site_ipsec.rst | 27 |
1 files changed, 24 insertions, 3 deletions
diff --git a/docs/configuration/vpn/site2site_ipsec.rst b/docs/configuration/vpn/site2site_ipsec.rst index e89d25c6..57b45181 100644 --- a/docs/configuration/vpn/site2site_ipsec.rst +++ b/docs/configuration/vpn/site2site_ipsec.rst @@ -280,17 +280,31 @@ Imagine the following topology IPSec IKEv2 site2site VPN (source ./draw.io/vpn_s2s_ikev2.drawio) +**LEFT:** +* WAN interface on `eth0.201` +* `eth0.201` interface IP: `172.18.201.10/24` +* `vti10` interface IP: `10.0.0.2/31` +* `dum0` interface IP: `10.0.11.1/24` (for testing purposes) + +**RIGHT:** +* WAN interface on `eth0.202` +* `eth0.201` interface IP: `172.18.202.10/24` +* `vti10` interface IP: `10.0.0.3/31` +* `dum0` interface IP: `10.0.12.1/24` (for testing purposes) .. note:: Don't get confused about the used /31 tunnel subnet. :rfc:`3021` gives you additional information for using /31 subnets on point-to-point links. -**left** +**LEFT** .. code-block:: none + set interfaces ethernet eth0 vif 201 address '172.18.201.10/24' + set interfaces dummy dum0 address '10.0.11.1/24' set interfaces vti vti10 address '10.0.0.2/31' + set vpn ipsec option disable-route-autoinstall set vpn ipsec authentication psk OFFICE-B id '172.18.201.10' set vpn ipsec authentication psk OFFICE-B id '172.18.202.10' set vpn ipsec authentication psk OFFICE-B secret 'secretkey' @@ -311,17 +325,22 @@ Imagine the following topology set vpn ipsec site-to-site peer OFFICE-B authentication remote-id '172.18.202.10' set vpn ipsec site-to-site peer OFFICE-B connection-type 'respond' set vpn ipsec site-to-site peer OFFICE-B ike-group 'IKEv2_DEFAULT' - set vpn ipsec site-to-site peer OFFICE-B local-address '192.168.0.10' + set vpn ipsec site-to-site peer OFFICE-B local-address '172.18.201.10' set vpn ipsec site-to-site peer OFFICE-B remote-address '172.18.202.10' set vpn ipsec site-to-site peer OFFICE-B vti bind 'vti10' set vpn ipsec site-to-site peer OFFICE-B vti esp-group 'ESP_DEFAULT' -**right** + set protocols static interface-route 10.0.12.0/24 next-hop-interface vti10 + +**RIGHT** .. code-block:: none + set interfaces ethernet eth0 vif 202 address '172.18.202.10/24' + set interfaces dummy dum0 address '10.0.12.1/24' set interfaces vti vti10 address '10.0.0.3/31' + set vpn ipsec option disable-route-autoinstall set vpn ipsec authentication psk OFFICE-A id '172.18.201.10' set vpn ipsec authentication psk OFFICE-A id '172.18.202.10' set vpn ipsec authentication psk OFFICE-A secret 'secretkey' @@ -350,6 +369,8 @@ Imagine the following topology set vpn ipsec site-to-site peer OFFICE-A vti bind 'vti10' set vpn ipsec site-to-site peer OFFICE-A vti esp-group 'ESP_DEFAULT' + set protocols static interface-route 10.0.11.0/24 next-hop-interface vti10 + Key Parameters: * ``authentication local-id/remote-id`` - IKE identification is used for |