diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/trafficpolicy/index.rst | 86 |
1 files changed, 55 insertions, 31 deletions
diff --git a/docs/configuration/trafficpolicy/index.rst b/docs/configuration/trafficpolicy/index.rst index babccd6f..856ae01c 100644 --- a/docs/configuration/trafficpolicy/index.rst +++ b/docs/configuration/trafficpolicy/index.rst @@ -119,8 +119,8 @@ Matching traffic ---------------- In order to define which traffic goes into which class, you define -filters (that is, the matching criteria). Packets go through these matching rules -(as in the rules of a firewall) and, if a packet matches the filter, it +filters (that is, the matching criteria). Packets go through these matching +rules (as in the rules of a firewall) and, if a packet matches the filter, it is assigned to that class. In VyOS, a class is identified by a number you can choose when @@ -194,7 +194,8 @@ different parameters you can configure. As shown in the example above, one of the possibilities to match packets -is based on marks done by the firewall, `that can give you a great deal of flexibility`_. +is based on marks done by the firewall, +`that can give you a great deal of flexibility`_. You can also write a description for a filter: @@ -204,12 +205,12 @@ You can also write a description for a filter: -.. note:: An IPv4 TCP filter will only match packets with an IPv4 header length of - 20 bytes (which is the majority of IPv4 packets anyway). +.. note:: An IPv4 TCP filter will only match packets with an IPv4 header + length of 20 bytes (which is the majority of IPv4 packets anyway). -.. note:: IPv6 TCP filters will only match IPv6 packets with no header extension, see - https://en.wikipedia.org/wiki/IPv6_packet#Extension_headers +.. note:: IPv6 TCP filters will only match IPv6 packets with no header + extension, see https://en.wikipedia.org/wiki/IPv6_packet#Extension_headers Default @@ -250,9 +251,9 @@ possibilities depending on the Traffic Policy you are configuring. target fq-codel - Acceptable minimum queue delay (milliseconds) -For instance, with :code:`set traffic-policy shaper MY-SHAPER class 30 set-dscp EF` -you would be modifying the DSCP field value of packets in that class to -Expedite Forwarding. +For instance, with :code:`set traffic-policy shaper MY-SHAPER +class 30 set-dscp EF` you would be modifying the DSCP field value of packets in +that class to Expedite Forwarding. DSCP values as per :rfc:`2474` and :rfc:`4595`: @@ -371,7 +372,8 @@ This is the policy that requieres the lowest resources for the same amount of traffic. But **very likely you do not need it as you cannot get much from it. Sometimes it is used just to enable logging.** -.. cfgcmd:: set traffic-policy drop-tail <policy-name> queue-limit <number-of-packets> +.. cfgcmd:: set traffic-policy drop-tail <policy-name> queue-limit + <number-of-packets> Use this command to configure a drop-tail policy (PFIFO). Choose a unique name for this policy and the size of the queue by setting the @@ -509,7 +511,8 @@ and increase `interval` to something around 150 ms. persistent queue is developing, ensuring that the measured minimum delay does not become too stale (default: 100ms). -.. cfgcmd:: set traffic-policy fq-codel <policy-name> queue-limit <number-of-packets>` +.. cfgcmd:: set traffic-policy fq-codel <policy-name> queue-limit + <number-of-packets>` Use this command to configure an fq-codel policy, set its name, and define a hard limit on the real queue size. When this limit is @@ -562,7 +565,8 @@ the configured classes. **inbound** traffic, check the ingress-shaping_ section. -.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> match <match-name> description <description> +.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> match + <match-name> description <description> Use this command to configure an Ingress Policer, defining its name, a class identifier (1-4090), a class matching rule name and its @@ -573,14 +577,16 @@ Once the matching rules are set for a class, you can start configuring how you want matching traffic to behave. -.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> bandwidth <rate> +.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> bandwidth + <rate> Use this command to configure an Ingress Policer, defining its name, a class identifier (1-4090) and the maximum allowed bandwidth for this class. -.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> burst <burst-size> +.. cfgcmd:: set traffic-policy limiter <policy-name> class <class-ID> burst + <burst-size> Use this command to configure an Ingress Policer, defining its name, a class identifier (1-4090) and the burst size in bytes for this @@ -599,7 +605,8 @@ how you want matching traffic to behave. and the burst size in bytes (default: 15) for its default policy. -.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> priority <value> +.. cfgcmd:: set traffic-policy limiter <policy-name> class <class ID> priority + <value> Use this command to configure an Ingress Policer, defining its name, a class identifier (1-4090), and the priority (0-20, default 20) in @@ -636,7 +643,8 @@ under certain network conditions. Token Bucket Filter qdisc). Default:15kb. It will only take effect if you have configured its bandwidth too. -.. cfgcmd:: set traffic-policy network-emulator <policy-name> network-delay <delay> +.. cfgcmd:: set traffic-policy network-emulator <policy-name> network-delay + <delay> Use this command to configure a Network Emulator policy defining its name and the fixed amount of time you want to add to all packet going @@ -645,26 +653,30 @@ under certain network conditions. configured its bandwidth too. You can use secs, ms and us. Default: 50ms. -.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-corruption <percent> +.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-corruption + <percent> Use this command to emulate noise in a Network Emulator policy. Set the policy name and the percentage of corrupted packets you want. A random error will be introduced in a random position for the chosen percent of packets. -.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-loss <percent>` +.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-loss + <percent> Use this command to emulate packet-loss conditions in a Network Emulator policy. Set the policy name and the percentage of loss packets your traffic will suffer. -.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-reordering <percent>` +.. cfgcmd:: set traffic-policy network-emulator <policy-name> packet-reordering + <percent> Use this command to emulate packet-reordering conditions in a Network Emulator policy. Set the policy name and the percentage of reordered packets your traffic will suffer. -.. cfgcmd:: set traffic-policy network-emulator <policy-name> queue-limit <limit> +.. cfgcmd:: set traffic-policy network-emulator <policy-name> queue-limit + <limit> Use this command to define the length of the queue of your Network Emulator policy. Set the policy name and the maximum number of @@ -735,7 +747,8 @@ setting: Random Early Detection (RED) -.. cfgcmd:: set traffic-policy priority-queue <policy-name> class <class-ID> queue-limit <limit>` +.. cfgcmd:: set traffic-policy priority-queue <policy-name> class <class-ID> + queue-limit <limit>` Use this command to configure a Priority Queue policy, set its name, set a class with a priority from 1 to 7 and define a hard limit on @@ -804,7 +817,8 @@ algorithm might be to prevent a backbone overload. But only for TCP set to the bandwidth of your interface. Random Detect is not a shaping policy, this command will not shape. -.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence <IP-precedence-value> average-packet <bytes> +.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence + <IP-precedence-value> average-packet <bytes> Use this command to configure a Random-Detect policy and set its name, then state the IP Precedence for the virtual queue you are @@ -814,7 +828,8 @@ algorithm might be to prevent a backbone overload. But only for TCP .. note:: When configuring a Random-Detect policy: **the higher the precedence number, the higher the priority**. -.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence <IP-precedence-value> mark-probability <value> +.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence + <IP-precedence-value> mark-probability <value> Use this command to configure a Random-Detect policy and set its name, then state the IP Precedence for the virtual queue you are @@ -822,7 +837,8 @@ algorithm might be to prevent a backbone overload. But only for TCP probability by giving the N value of the fraction 1/N (default: 10). -.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence <IP-precedence-value> maximum-threshold <packets> +.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence + <IP-precedence-value> maximum-threshold <packets> Use this command to configure a Random-Detect policy and set its name, then state the IP Precedence for the virtual queue you are @@ -830,7 +846,8 @@ algorithm might be to prevent a backbone overload. But only for TCP be (from 0 to 4096 packets, default: 18). At this size, the marking (drop) probability is maximal. -.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence <IP-precedence-value> minimum-threshold <packets> +.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence + <IP-precedence-value> minimum-threshold <packets> Use this command to configure a Random-Detect policy and set its name, then state the IP Precedence for the virtual queue you are @@ -862,7 +879,8 @@ The default values for the minimum-threshold depend on IP precedence: +------------+-----------------------+ -.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence <IP-precedence-value> queue-limit <packets> +.. cfgcmd:: set traffic-policy random-detect <policy-name> precedence + <IP-precedence-value> queue-limit <packets> Use this command to configure a Random-Detect policy and set its name, then name the IP Precedence for the virtual queue you are @@ -1023,25 +1041,29 @@ the higher the priority. and the maximum bandwidth for all combined traffic. -.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> bandwidth <rate> +.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> bandwidth + <rate> Use this command to configure a Shaper policy, set its name, define a class and set the guaranteed traffic you want to allocate to that class. -.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> burst <bytes> +.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> burst + <bytes> Use this command to configure a Shaper policy, set its name, define a class and set the size of the `tocken bucket`_ in bytes, which will be available to be sent at ceiling speed (default: 15Kb). -.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> ceiling <bandwidth> +.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> ceiling + <bandwidth> Use this command to configure a Shaper policy, set its name, define a class and set the maximum speed possible for this class. The default ceiling value is the bandwidth value. -.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> priority <0-7> +.. cfgcmd:: set traffic-policy shaper <policy-name> class <class-ID> priority + <0-7> Use this command to configure a Shaper policy, set its name, define a class and set the priority for usage of available bandwidth once @@ -1195,8 +1217,10 @@ That is how it is possible to do the so-called "ingress shaping". which can be solved with ``sudo ip link delete ifb0``. +.. stop_vyoslinter .. _that can give you a great deal of flexibility: https://blog.vyos.io/using-the-policy-route-and-packet-marking-for-custom-qos-matches .. _tc: https://en.wikipedia.org/wiki/Tc_(Linux) .. _tocken bucket: https://en.wikipedia.org/wiki/Token_bucket .. _HFSC: https://en.wikipedia.org/wiki/Hierarchical_fair-service_curve .. _Intermediate Functional Block: https://www.linuxfoundation.org/collaborate/workgroups/networking/ifb +.. start_vyoslinter
\ No newline at end of file |