diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/policy/route-map.rst | 8 | ||||
| -rw-r--r-- | docs/configuration/protocols/bgp.rst | 27 | ||||
| -rw-r--r-- | docs/configuration/protocols/isis.rst | 28 | ||||
| -rw-r--r-- | docs/configuration/system/ipv6.rst | 28 |
4 files changed, 48 insertions, 43 deletions
diff --git a/docs/configuration/policy/route-map.rst b/docs/configuration/policy/route-map.rst index 9fe1eef7..07cfcf02 100644 --- a/docs/configuration/policy/route-map.rst +++ b/docs/configuration/policy/route-map.rst @@ -318,10 +318,12 @@ Route Map Set BGP local preference attribute. .. cfgcmd:: set policy route-map <text> rule <1-65535> set metric - <+/-metric|0-4294967295> + <+/-metric|0-4294967295|rtt|+rtt|-rtt> - Set destination routing protocol metric. Add or subtract metric, or set - metric value. + Set the route metric. When used with BGP, set the BGP attribute MED + to a specific value. Use ``+/-`` to add or subtract the specified value + to/from the existing/MED. Use ``rtt`` to set the MED to the round trip + time or ``+rtt/-rtt`` to add/subtract the round trip time to/from the MED. .. cfgcmd:: set policy route-map <text> rule <1-65535> set metric-type <type-1|type-2> diff --git a/docs/configuration/protocols/bgp.rst b/docs/configuration/protocols/bgp.rst index 737e98fa..8fc69111 100644 --- a/docs/configuration/protocols/bgp.rst +++ b/docs/configuration/protocols/bgp.rst @@ -952,7 +952,7 @@ Operational Mode Commands Show ==== -.. opcmd:: show <ip|ipv6> bgp +.. opcmd:: show bgp <ipv4|ipv6> This command displays all entries in BGP routing table. @@ -964,6 +964,7 @@ Show i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete + RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path *> 198.51.100.0/24 10.0.34.4 0 0 65004 i @@ -971,7 +972,7 @@ Show Displayed 2 routes and 2 total paths -.. opcmd:: show <ip|ipv6> bgp <address|prefix> +.. opcmd:: show bgp <ipv4|ipv6> <address|prefix> This command displays information about the particular entry in the BGP routing table. @@ -991,55 +992,55 @@ Show This command displays routes with classless interdomain routing (CIDR). -.. opcmd:: show <ip|ipv6> bgp community <value> +.. opcmd:: show bgp <ipv4|ipv6> community <value> This command displays routes that belong to specified BGP communities. Valid value is a community number in the range from 1 to 4294967200, or AA:NN (autonomous system-community number/2-byte number), no-export, local-as, or no-advertise. -.. opcmd:: show <ip|ipv6> bgp community-list <name> +.. opcmd:: show bgp <ipv4|ipv6> community-list <name> This command displays routes that are permitted by the BGP community list. -.. opcmd:: show ip bgp dampened-paths +.. opcmd:: show bgp <ipv4|ipv6> dampening dampened-paths This command displays BGP dampened routes. -.. opcmd:: show ip bgp flap-statistics +.. opcmd:: show bgp <ipv4|ipv6> dampening flap-statistics This command displays information about flapping BGP routes. -.. opcmd:: show ip bgp filter-list <name> +.. opcmd:: show bgp <ipv4|ipv6> filter-list <name> This command displays BGP routes allowed by the specified AS Path access list. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> advertised-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> advertised-routes This command displays BGP routes advertised to a neighbor. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> received-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> received-routes This command displays BGP routes originating from the specified BGP neighbor before inbound policy is applied. To use this command inbound soft reconfiguration must be enabled. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> routes This command displays BGP received-routes that are accepted after filtering. -.. opcmd:: show <ip|ipv6> bgp neighbors <address> dampened-routes +.. opcmd:: show bgp <ipv4|ipv6> neighbors <address> dampened-routes This command displays dampened routes received from BGP neighbor. -.. opcmd:: show <ip|ipv6> bgp regexp <text> +.. opcmd:: show bgp <ipv4|ipv6> regexp <text> This command displays information about BGP routes whose AS path matches the specified regular expression. -.. opcmd:: show <ip|ipv6> bgp summary +.. opcmd:: show bgp <ipv4|ipv6> summary This command displays the status of all BGP connections. diff --git a/docs/configuration/protocols/isis.rst b/docs/configuration/protocols/isis.rst index 18a7c166..1f779d0a 100644 --- a/docs/configuration/protocols/isis.rst +++ b/docs/configuration/protocols/isis.rst @@ -302,6 +302,34 @@ Timers control the timing of the execution of SPF calculations in response to IGP events. The process described in :rfc:`8405`. +Loop Free Alternate (LFA) +------------------------- + +.. cfgcmd:: set protocols isis fast-reroute lfa remote prefix-list <name> + <level-1|level-2> + + This command enables IP fast re-routing that is part of :rfc:`5286`. + Specifically this is a prefix list which references a prefix in which + will select eligible PQ nodes for remote LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local load-sharing disable + <level-1|level-2> + + This command disables the load sharing across multiple LFA backups. + +.. cfgcmd:: set protocols isis fast-reroute lfa local tiebreaker + <downstream|lowest-backup-metric|node-protecting> index <number> + <level-1|level-2> + + This command will configure a tie-breaker for multiple local LFA backups. + The lower index numbers will be processed first. + +.. cfgcmd:: set protocols isis fast-reroute lfa local priority-limit + <medium|high|critical> <level-1|level-2> + + This command will limit LFA backup computation up to the specified + prefix priority. + ******** Examples diff --git a/docs/configuration/system/ipv6.rst b/docs/configuration/system/ipv6.rst index 076efdae..c7308f9d 100644 --- a/docs/configuration/system/ipv6.rst +++ b/docs/configuration/system/ipv6.rst @@ -81,6 +81,7 @@ Show commands static Show IPv6 static routes summary Show IPv6 routes summary table Show IP routes in policy table + tag Show only routes with tag vrf Show IPv6 routes in VRF @@ -112,33 +113,6 @@ Show commands <Enter> Execute the current command <text> Show specified IPv6 access-list -.. opcmd:: show ipv6 bgp - - Use this command to show IPv6 Border Gateway Protocol information. - - - In addition, you can specify many other parameters to get BGP - information: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 bgp - Possible completions: - <Enter> Execute the current command - <X:X::X:X> Show BGP information for given address or prefix - <X:X::X:X/M> - community Show routes matching the communities - community-list - Show routes matching the community-list - filter-list Show routes conforming to the filter-list - large-community - Show routes matching the large-community-list - large-community-list - neighbors Show detailed information on TCP and BGP neighbor connections - prefix-list Show routes matching the prefix-list - regexp Show routes matching the AS path regular expression - route-map Show BGP routes matching the specified route map - summary Show summary of BGP neighbor status .. opcmd:: show ipv6 ospfv3 |