diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/firewall/bridge.rst | 38 | ||||
| -rw-r--r-- | docs/configuration/firewall/ipv4.rst | 50 | ||||
| -rw-r--r-- | docs/configuration/firewall/ipv6.rst | 50 | ||||
| -rw-r--r-- | docs/configuration/loadbalancing/haproxy.rst (renamed from docs/configuration/loadbalancing/reverse-proxy.rst) | 210 | ||||
| -rw-r--r-- | docs/configuration/loadbalancing/index.rst | 2 | ||||
| -rw-r--r-- | docs/configuration/service/https.rst | 22 |
6 files changed, 259 insertions, 113 deletions
diff --git a/docs/configuration/firewall/bridge.rst b/docs/configuration/firewall/bridge.rst index 39956236..9c360d35 100644 --- a/docs/configuration/firewall/bridge.rst +++ b/docs/configuration/firewall/bridge.rst @@ -386,6 +386,44 @@ described in this section: Match based on VLAN priority (Priority Code Point - PCP). Range is also supported. +Packet Modifications +==================== + +Starting from **VyOS-1.5-rolling-202410060007**, the firewall can modify +packets before they are sent out. This feaure provides more flexibility in +packet handling. + +.. cfgcmd:: set firewall bridge [prerouting | forward | output] filter + rule <1-999999> set dscp <0-63> + + Set a specific value of Differentiated Services Codepoint (DSCP). + +.. cfgcmd:: set firewall bridge [prerouting | forward | output] filter + rule <1-999999> set mark <1-2147483647> + + Set a specific packet mark value. + +.. cfgcmd:: set firewall bridge [prerouting | forward | output] filter + rule <1-999999> set tcp-mss <500-1460> + + Set the TCP-MSS (TCP maximum segment size) for the connection. + +.. cfgcmd:: set firewall bridge [prerouting | forward | output] filter + rule <1-999999> set ttl <0-255> + + Set the TTL (Time to Live) value. + +.. cfgcmd:: set firewall bridge [prerouting | forward | output] filter + rule <1-999999> set hop-limit <0-255> + + Set hop limit value. + +.. cfgcmd:: set firewall bridge [forward | output] filter + rule <1-999999> set connection-mark <0-2147483647> + + Set connection mark value. + + Use IP firewall =============== diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst index abae31a5..419a9339 100644 --- a/docs/configuration/firewall/ipv4.rst +++ b/docs/configuration/firewall/ipv4.rst @@ -980,6 +980,56 @@ geoip) to keep database and rules updated. Match when 'count' amount of connections are seen within 'time'. These matching criteria can be used to block brute-force attempts. +Packet Modifications +==================== + +Starting from **VyOS-1.5-rolling-202410060007**, the firewall can modify +packets before they are sent out. This feaure provides more flexibility in +packet handling. + +.. cfgcmd:: set firewall ipv4 prerouting raw rule <1-999999> + set dscp <0-63> +.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> + set dscp <0-63> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set dscp <0-63> + + Set a specific value of Differentiated Services Codepoint (DSCP). + +.. cfgcmd:: set firewall ipv4 prerouting raw rule <1-999999> + set mark <1-2147483647> +.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> + set mark <1-2147483647> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set mark <1-2147483647> + + Set a specific packet mark value. + +.. cfgcmd:: set firewall ipv4 prerouting raw rule <1-999999> + set tcp-mss <500-1460> +.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> + set tcp-mss <500-1460> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set tcp-mss <500-1460> + + Set the TCP-MSS (TCP maximum segment size) for the connection. + +.. cfgcmd:: set firewall ipv4 prerouting raw rule <1-999999> + set ttl <0-255> +.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> + set ttl <0-255> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set ttl <0-255> + + Set the TTL (Time to Live) value. + +.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> + set connection-mark <0-2147483647> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set connection-mark <0-2147483647> + + Set connection mark value. + ******** Synproxy ******** diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst index 5f526dac..0c995c12 100644 --- a/docs/configuration/firewall/ipv6.rst +++ b/docs/configuration/firewall/ipv6.rst @@ -970,6 +970,56 @@ geoip) to keep database and rules updated. Match when 'count' amount of connections are seen within 'time'. These matching criteria can be used to block brute-force attempts. +Packet Modifications +==================== + +Starting from **VyOS-1.5-rolling-202410060007**, the firewall can modify +packets before they are sent out. This feaure provides more flexibility in +packet handling. + +.. cfgcmd:: set firewall ipv6 prerouting raw rule <1-999999> + set dscp <0-63> +.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> + set dscp <0-63> +.. cfgcmd:: set firewall ipv6 output [filter | raw] rule <1-999999> + set dscp <0-63> + + Set a specific value of Differentiated Services Codepoint (DSCP). + +.. cfgcmd:: set firewall ipv6 prerouting raw rule <1-999999> + set mark <1-2147483647> +.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> + set mark <1-2147483647> +.. cfgcmd:: set firewall ipv6 output [filter | raw] rule <1-999999> + set mark <1-2147483647> + + Set a specific packet mark value. + +.. cfgcmd:: set firewall ipv6 prerouting raw rule <1-999999> + set tcp-mss <500-1460> +.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> + set tcp-mss <500-1460> +.. cfgcmd:: set firewall ipv6 output [filter | raw] rule <1-999999> + set tcp-mss <500-1460> + + Set the TCP-MSS (TCP maximum segment size) for the connection. + +.. cfgcmd:: set firewall ipv6 prerouting raw rule <1-999999> + set hop-limit <0-255> +.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> + set hop-limit <0-255> +.. cfgcmd:: set firewall ipv6 output [filter | raw] rule <1-999999> + set hop-limit <0-255> + + Set hop limit value. + +.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> + set connection-mark <0-2147483647> +.. cfgcmd:: set firewall ipv4 output [filter | raw] rule <1-999999> + set connection-mark <0-2147483647> + + Set connection mark value. + ******** Synproxy ******** diff --git a/docs/configuration/loadbalancing/reverse-proxy.rst b/docs/configuration/loadbalancing/haproxy.rst index 32be85c8..3ce59b35 100644 --- a/docs/configuration/loadbalancing/reverse-proxy.rst +++ b/docs/configuration/loadbalancing/haproxy.rst @@ -1,11 +1,11 @@ ############# -Reverse-proxy +Haproxy ############# .. include:: /_include/need_improvement.txt -VyOS reverse-proxy is balancer and proxy server that provides +Haproxy is a balancer and proxy server that provides high-availability, load balancing and proxying for TCP (level 4) and HTTP-based (level 7) applications. @@ -20,37 +20,37 @@ to be applied and specifies the real servers to be utilized. Service ------- -.. cfgcmd:: set load-balancing reverse-proxy service <name> listen-address +.. cfgcmd:: set load-balancing haproxy service <name> listen-address <address> Set service to bind on IP address, by default listen on any IPv4 and IPv6 -.. cfgcmd:: set load-balancing reverse-proxy service <name> port +.. cfgcmd:: set load-balancing haproxy service <name> port <port> Create service `<name>` to listen on <port> -.. cfgcmd:: set load-balancing reverse-proxy service <name> mode +.. cfgcmd:: set load-balancing haproxy service <name> mode <tcp|http> Configure service `<name>` mode TCP or HTTP -.. cfgcmd:: set load-balancing reverse-proxy service <name> backend +.. cfgcmd:: set load-balancing haproxy service <name> backend <name> Configure service `<name>` to use the backend <name> -.. cfgcmd:: set load-balancing reverse-proxy service <name> ssl +.. cfgcmd:: set load-balancing haproxy service <name> ssl certificate <name> Set SSL certificate <name> for service <name> -.. cfgcmd:: set load-balancing reverse-proxy service <name> +.. cfgcmd:: set load-balancing haproxy service <name> http-response-headers <header-name> value <header-value> Set custom HTTP headers to be included in all responses -.. cfgcmd:: set load-balancing reverse-proxy service <name> logging facility +.. cfgcmd:: set load-balancing haproxy service <name> logging facility <facility> level <level> Specify facility and level for logging. @@ -64,12 +64,12 @@ Rules allow to control and route incoming traffic to specific backend based on predefined conditions. Rules allow to define matching criteria and perform action accordingly. -.. cfgcmd:: set load-balancing reverse-proxy service <name> rule <rule> +.. cfgcmd:: set load-balancing haproxy service <name> rule <rule> domain-name <name> Match domain name -.. cfgcmd:: set load-balancing reverse-proxy service <name> rule <rule> +.. cfgcmd:: set load-balancing haproxy service <name> rule <rule> ssl <sni> SSL match Server Name Indication (SNI) option: @@ -79,7 +79,7 @@ perform action accordingly. Indication -.. cfgcmd:: set load-balancing reverse-proxy service <name> rule <rule> +.. cfgcmd:: set load-balancing haproxy service <name> rule <rule> url-path <match> <url> Allows to define URL path matching rules for a specific service. @@ -92,12 +92,12 @@ perform action accordingly. * ``end`` Matches the end of the URL path. * ``exact`` Requires an exactly match of the URL path -.. cfgcmd:: set load-balancing reverse-proxy service <name> rule <rule> +.. cfgcmd:: set load-balancing haproxy service <name> rule <rule> set backend <name> Assign a specific backend to a rule -.. cfgcmd:: set load-balancing reverse-proxy service <name> rule <rule> +.. cfgcmd:: set load-balancing haproxy service <name> rule <rule> redirect-location <url> Redirect URL to a new location @@ -106,7 +106,7 @@ perform action accordingly. Backend ------- -.. cfgcmd:: set load-balancing reverse-proxy backend <name> balance +.. cfgcmd:: set load-balancing haproxy backend <name> balance <balance> Load-balancing algorithms to be used for distributed requests among the @@ -120,54 +120,54 @@ Backend * ``least-connection`` Distributes requests to the server with the fewest active connections -.. cfgcmd:: set load-balancing reverse-proxy backend <name> mode +.. cfgcmd:: set load-balancing haproxy backend <name> mode <mode> Configure backend `<name>` mode TCP or HTTP -.. cfgcmd:: set load-balancing reverse-proxy backend <name> server +.. cfgcmd:: set load-balancing haproxy backend <name> server <name> address <x.x.x.x> Set the address of the backend server to which the incoming traffic will be forwarded -.. cfgcmd:: set load-balancing reverse-proxy backend <name> server +.. cfgcmd:: set load-balancing haproxy backend <name> server <name> port <port> Set the address of the backend port -.. cfgcmd:: set load-balancing reverse-proxy backend <name> server +.. cfgcmd:: set load-balancing haproxy backend <name> server <name> check Active health check backend server -.. cfgcmd:: set load-balancing reverse-proxy backend <name> server +.. cfgcmd:: set load-balancing haproxy backend <name> server <name> send-proxy Send a Proxy Protocol version 1 header (text format) -.. cfgcmd:: set load-balancing reverse-proxy backend <name> server +.. cfgcmd:: set load-balancing haproxy backend <name> server <name> send-proxy-v2 Send a Proxy Protocol version 2 header (binary format) -.. cfgcmd:: set load-balancing reverse-proxy backend <name> ssl +.. cfgcmd:: set load-balancing haproxy backend <name> ssl ca-certificate <ca-certificate> Configure requests to the backend server to use SSL encryption and authenticate backend against <ca-certificate> -.. cfgcmd:: set load-balancing reverse-proxy backend <name> ssl no-verify +.. cfgcmd:: set load-balancing haproxy backend <name> ssl no-verify Configure requests to the backend server to use SSL encryption without validating server certificate -.. cfgcmd:: set load-balancing reverse-proxy backend <name> +.. cfgcmd:: set load-balancing haproxy backend <name> http-response-headers <header-name> value <header-value> Set custom HTTP headers to be included in all responses using the backend -.. cfgcmd:: set load-balancing reverse-proxy backend <name> logging facility +.. cfgcmd:: set load-balancing haproxy backend <name> logging facility <facility> level <level> Specify facility and level for logging. @@ -180,22 +180,22 @@ Global Global parameters -.. cfgcmd:: set load-balancing reverse-proxy global-parameters max-connections +.. cfgcmd:: set load-balancing haproxy global-parameters max-connections <num> Limit maximum number of connections -.. cfgcmd:: set load-balancing reverse-proxy global-parameters ssl-bind-ciphers +.. cfgcmd:: set load-balancing haproxy global-parameters ssl-bind-ciphers <ciphers> Limit allowed cipher algorithms used during SSL/TLS handshake -.. cfgcmd:: set load-balancing reverse-proxy global-parameters tls-version-min +.. cfgcmd:: set load-balancing haproxy global-parameters tls-version-min <version> Specify the minimum required TLS version 1.2 or 1.3 -.. cfgcmd:: set load-balancing reverse-proxy global-parameters logging +.. cfgcmd:: set load-balancing haproxy global-parameters logging facility <facility> level <level> Specify facility and level for logging. @@ -212,22 +212,22 @@ HTTP checks For web application providing information about their state HTTP health checks can be used to determine their availability. -.. cfgcmd:: set load-balancing reverse-proxy backend <name> http-check +.. cfgcmd:: set load-balancing haproxy backend <name> http-check Enables HTTP health checks using OPTION HTTP requests against '/' and expecting a successful response code in the 200-399 range. -.. cfgcmd:: set load-balancing reverse-proxy backend <name> http-check +.. cfgcmd:: set load-balancing haproxy backend <name> http-check method <method> Sets the HTTP method to be used, can be either: option, get, post, put -.. cfgcmd:: set load-balancing reverse-proxy backend <name> http-check +.. cfgcmd:: set load-balancing haproxy backend <name> http-check uri <path> Sets the endpoint to be used for health checks -.. cfgcmd:: set load-balancing reverse-proxy backend <name> http-check +.. cfgcmd:: set load-balancing haproxy backend <name> http-check expect <condition> Sets the expected result condition for considering a server healthy. @@ -244,7 +244,7 @@ TCP checks Health checks can also be configured for TCP mode backends. You can configure protocol aware checks for a range of Layer 7 protocols: -.. cfgcmd:: set load-balancing reverse-proxy backend <name> health-check <protocol> +.. cfgcmd:: set load-balancing haproxy backend <name> health-check <protocol> Available health check protocols: * ``ldap`` LDAP protocol check. @@ -261,15 +261,15 @@ protocol aware checks for a range of Layer 7 protocols: Redirect HTTP to HTTPS ====================== -Configure the load-balancing reverse-proxy service for HTTP. +Configure the load-balancing haproxy service for HTTP. This configuration listen on port 80 and redirect incoming requests to HTTPS: .. code-block:: none - set load-balancing reverse-proxy service http port '80' - set load-balancing reverse-proxy service http redirect-http-to-https + set load-balancing haproxy service http port '80' + set load-balancing haproxy service http redirect-http-to-https The name of the service can be different, in this example it is only for convenience. @@ -287,17 +287,17 @@ servers (srv01 and srv02) using the round-robin load-balancing algorithm. .. code-block:: none - set load-balancing reverse-proxy service my-tcp-api backend 'bk-01' - set load-balancing reverse-proxy service my-tcp-api mode 'tcp' - set load-balancing reverse-proxy service my-tcp-api port '8888' + set load-balancing haproxy service my-tcp-api backend 'bk-01' + set load-balancing haproxy service my-tcp-api mode 'tcp' + set load-balancing haproxy service my-tcp-api port '8888' - set load-balancing reverse-proxy backend bk-01 balance 'round-robin' - set load-balancing reverse-proxy backend bk-01 mode 'tcp' + set load-balancing haproxy backend bk-01 balance 'round-robin' + set load-balancing haproxy backend bk-01 mode 'tcp' - set load-balancing reverse-proxy backend bk-01 server srv01 address '192.0.2.11' - set load-balancing reverse-proxy backend bk-01 server srv01 port '8881' - set load-balancing reverse-proxy backend bk-01 server srv02 address '192.0.2.12' - set load-balancing reverse-proxy backend bk-01 server srv02 port '8882' + set load-balancing haproxy backend bk-01 server srv01 address '192.0.2.11' + set load-balancing haproxy backend bk-01 server srv01 port '8881' + set load-balancing haproxy backend bk-01 server srv02 address '192.0.2.12' + set load-balancing haproxy backend bk-01 server srv02 port '8882' Balancing based on domain name @@ -315,23 +315,23 @@ to the backend ``bk-api-02`` .. code-block:: none - set load-balancing reverse-proxy service http description 'bind app listen on 443 port' - set load-balancing reverse-proxy service http mode 'tcp' - set load-balancing reverse-proxy service http port '80' + set load-balancing haproxy service http description 'bind app listen on 443 port' + set load-balancing haproxy service http mode 'tcp' + set load-balancing haproxy service http port '80' - set load-balancing reverse-proxy service http rule 10 domain-name 'node1.example.com' - set load-balancing reverse-proxy service http rule 10 set backend 'bk-api-01' - set load-balancing reverse-proxy service http rule 20 domain-name 'node2.example.com' - set load-balancing reverse-proxy service http rule 20 set backend 'bk-api-02' + set load-balancing haproxy service http rule 10 domain-name 'node1.example.com' + set load-balancing haproxy service http rule 10 set backend 'bk-api-01' + set load-balancing haproxy service http rule 20 domain-name 'node2.example.com' + set load-balancing haproxy service http rule 20 set backend 'bk-api-02' - set load-balancing reverse-proxy backend bk-api-01 description 'My API-1' - set load-balancing reverse-proxy backend bk-api-01 mode 'tcp' - set load-balancing reverse-proxy backend bk-api-01 server api01 address '127.0.0.1' - set load-balancing reverse-proxy backend bk-api-01 server api01 port '4431' - set load-balancing reverse-proxy backend bk-api-02 description 'My API-2' - set load-balancing reverse-proxy backend bk-api-02 mode 'tcp' - set load-balancing reverse-proxy backend bk-api-02 server api01 address '127.0.0.2' - set load-balancing reverse-proxy backend bk-api-02 server api01 port '4432' + set load-balancing haproxy backend bk-api-01 description 'My API-1' + set load-balancing haproxy backend bk-api-01 mode 'tcp' + set load-balancing haproxy backend bk-api-01 server api01 address '127.0.0.1' + set load-balancing haproxy backend bk-api-01 server api01 port '4431' + set load-balancing haproxy backend bk-api-02 description 'My API-2' + set load-balancing haproxy backend bk-api-02 mode 'tcp' + set load-balancing haproxy backend bk-api-02 server api01 address '127.0.0.2' + set load-balancing haproxy backend bk-api-02 server api01 port '4432' Terminate SSL @@ -357,30 +357,30 @@ connection limit of 4000 and a minimum TLS version of 1.3. .. code-block:: none - set load-balancing reverse-proxy service http description 'Force redirect to HTTPS' - set load-balancing reverse-proxy service http port '80' - set load-balancing reverse-proxy service http redirect-http-to-https + set load-balancing haproxy service http description 'Force redirect to HTTPS' + set load-balancing haproxy service http port '80' + set load-balancing haproxy service http redirect-http-to-https - set load-balancing reverse-proxy service https backend 'bk-default' - set load-balancing reverse-proxy service https description 'listen on 443 port' - set load-balancing reverse-proxy service https mode 'http' - set load-balancing reverse-proxy service https port '443' - set load-balancing reverse-proxy service https ssl certificate 'cert' - set load-balancing reverse-proxy service https http-response-headers Strict-Transport-Security value 'max-age=31536000' + set load-balancing haproxy service https backend 'bk-default' + set load-balancing haproxy service https description 'listen on 443 port' + set load-balancing haproxy service https mode 'http' + set load-balancing haproxy service https port '443' + set load-balancing haproxy service https ssl certificate 'cert' + set load-balancing haproxy service https http-response-headers Strict-Transport-Security value 'max-age=31536000' - set load-balancing reverse-proxy service https rule 10 url-path exact '/.well-known/xxx' - set load-balancing reverse-proxy service https rule 10 set redirect-location '/certs/' - set load-balancing reverse-proxy service https rule 20 url-path end '/mail' - set load-balancing reverse-proxy service https rule 20 url-path exact '/email/bar' - set load-balancing reverse-proxy service https rule 20 set redirect-location '/postfix/' + set load-balancing haproxy service https rule 10 url-path exact '/.well-known/xxx' + set load-balancing haproxy service https rule 10 set redirect-location '/certs/' + set load-balancing haproxy service https rule 20 url-path end '/mail' + set load-balancing haproxy service https rule 20 url-path exact '/email/bar' + set load-balancing haproxy service https rule 20 set redirect-location '/postfix/' - set load-balancing reverse-proxy backend bk-default description 'Default backend' - set load-balancing reverse-proxy backend bk-default mode 'http' - set load-balancing reverse-proxy backend bk-default server sr01 address '192.0.2.23' - set load-balancing reverse-proxy backend bk-default server sr01 port '80' + set load-balancing haproxy backend bk-default description 'Default backend' + set load-balancing haproxy backend bk-default mode 'http' + set load-balancing haproxy backend bk-default server sr01 address '192.0.2.23' + set load-balancing haproxy backend bk-default server sr01 port '80' - set load-balancing reverse-proxy global-parameters max-connections '4000' - set load-balancing reverse-proxy global-parameters tls-version-min '1.3' + set load-balancing haproxy global-parameters max-connections '4000' + set load-balancing haproxy global-parameters tls-version-min '1.3' SSL Bridging @@ -402,17 +402,17 @@ and checks backend server has a valid certificate trusted by CA ``cacert`` .. code-block:: none - set load-balancing reverse-proxy service https backend 'bk-bridge-ssl' - set load-balancing reverse-proxy service https description 'listen on 443 port' - set load-balancing reverse-proxy service https mode 'http' - set load-balancing reverse-proxy service https port '443' - set load-balancing reverse-proxy service https ssl certificate 'cert' + set load-balancing haproxy service https backend 'bk-bridge-ssl' + set load-balancing haproxy service https description 'listen on 443 port' + set load-balancing haproxy service https mode 'http' + set load-balancing haproxy service https port '443' + set load-balancing haproxy service https ssl certificate 'cert' - set load-balancing reverse-proxy backend bk-bridge-ssl description 'SSL backend' - set load-balancing reverse-proxy backend bk-bridge-ssl mode 'http' - set load-balancing reverse-proxy backend bk-bridge-ssl ssl ca-certificate 'cacert' - set load-balancing reverse-proxy backend bk-bridge-ssl server sr01 address '192.0.2.23' - set load-balancing reverse-proxy backend bk-bridge-ssl server sr01 port '443' + set load-balancing haproxy backend bk-bridge-ssl description 'SSL backend' + set load-balancing haproxy backend bk-bridge-ssl mode 'http' + set load-balancing haproxy backend bk-bridge-ssl ssl ca-certificate 'cacert' + set load-balancing haproxy backend bk-bridge-ssl server sr01 address '192.0.2.23' + set load-balancing haproxy backend bk-bridge-ssl server sr01 port '443' Balancing with HTTP health checks @@ -422,21 +422,21 @@ This configuration enables HTTP health checks on backend servers. .. code-block:: none - set load-balancing reverse-proxy service my-tcp-api backend 'bk-01' - set load-balancing reverse-proxy service my-tcp-api mode 'tcp' - set load-balancing reverse-proxy service my-tcp-api port '8888' + set load-balancing haproxy service my-tcp-api backend 'bk-01' + set load-balancing haproxy service my-tcp-api mode 'tcp' + set load-balancing haproxy service my-tcp-api port '8888' - set load-balancing reverse-proxy backend bk-01 balance 'round-robin' - set load-balancing reverse-proxy backend bk-01 mode 'tcp' + set load-balancing haproxy backend bk-01 balance 'round-robin' + set load-balancing haproxy backend bk-01 mode 'tcp' - set load-balancing reverse-proxy backend bk-01 http-check method 'get' - set load-balancing reverse-proxy backend bk-01 http-check uri '/health' - set load-balancing reverse-proxy backend bk-01 http-check expect 'status 200' + set load-balancing haproxy backend bk-01 http-check method 'get' + set load-balancing haproxy backend bk-01 http-check uri '/health' + set load-balancing haproxy backend bk-01 http-check expect 'status 200' - set load-balancing reverse-proxy backend bk-01 server srv01 address '192.0.2.11' - set load-balancing reverse-proxy backend bk-01 server srv01 port '8881' - set load-balancing reverse-proxy backend bk-01 server srv01 check - set load-balancing reverse-proxy backend bk-01 server srv02 address '192.0.2.12' - set load-balancing reverse-proxy backend bk-01 server srv02 port '8882' - set load-balancing reverse-proxy backend bk-01 server srv02 check + set load-balancing haproxy backend bk-01 server srv01 address '192.0.2.11' + set load-balancing haproxy backend bk-01 server srv01 port '8881' + set load-balancing haproxy backend bk-01 server srv01 check + set load-balancing haproxy backend bk-01 server srv02 address '192.0.2.12' + set load-balancing haproxy backend bk-01 server srv02 port '8882' + set load-balancing haproxy backend bk-01 server srv02 check diff --git a/docs/configuration/loadbalancing/index.rst b/docs/configuration/loadbalancing/index.rst index 382bd0d7..92dcc622 100644 --- a/docs/configuration/loadbalancing/index.rst +++ b/docs/configuration/loadbalancing/index.rst @@ -9,4 +9,4 @@ Load-balancing :includehidden: wan - reverse-proxy + haproxy diff --git a/docs/configuration/service/https.rst b/docs/configuration/service/https.rst index af397456..e72e8e8b 100644 --- a/docs/configuration/service/https.rst +++ b/docs/configuration/service/https.rst @@ -67,19 +67,22 @@ API Set a named api key. Every key has the same, full permissions on the system. -.. cfgcmd:: set service https api debug +REST +==== + +.. cfgcmd:: set service https api rest + + Enable REST API + +.. cfgcmd:: set service https api rest debug To enable debug messages. Available via :opcmd:`show log` or :opcmd:`monitor log` -.. cfgcmd:: set service https api strict +.. cfgcmd:: set service https api rest strict Enforce strict path checking. -.. cfgcmd:: set service https api cors allow-origin <origin> - - Allow cross-origin requests from `<origin>`. - GraphQL ======= @@ -105,12 +108,17 @@ GraphQL Set the byte length of the JWT secret. Default is 32. +.. cfgcmd:: set service https api graphql cors allow-origin <origin> + + Allow cross-origin requests from `<origin>`. + ********************* Example Configuration ********************* -Set an API-KEY is the minimal configuration to get a working API Endpoint. +Setting REST API and an API-KEY is the minimal configuration to get a working API Endpoint. .. code-block:: none set service https api keys id MY-HTTPS-API-ID key MY-HTTPS-API-PLAINTEXT-KEY + set service https api rest |