diff options
Diffstat (limited to 'docs/installation/bare-metal.rst')
| -rw-r--r-- | docs/installation/bare-metal.rst | 678 |
1 files changed, 678 insertions, 0 deletions
diff --git a/docs/installation/bare-metal.rst b/docs/installation/bare-metal.rst new file mode 100644 index 00000000..6578f84e --- /dev/null +++ b/docs/installation/bare-metal.rst @@ -0,0 +1,678 @@ +.. _vyosonbaremetal: + +##################### +Bare Metal Deployment +##################### + +Supermicro A2SDi (Atom C3000) +============================= + +I opted to get one of the new Intel Atom C3000 CPUs to spawn VyOS on it. +Running VyOS on an UEFI only device is supported as of VyOS release 1.2. + +Shopping Cart +------------- + +* 1x Supermicro CSE-505-203B (19" 1U chassis, inkl. 200W PSU) +* 1x Supermicro MCP-260-00085-0B (I/O Shield for A2SDi-2C-HLN4F) +* 1x Supermicro A2SDi-2C-HLN4F (Intel Atom C3338, 2C/2T, 4MB cache, Quad LAN + with Intel C3000 SoC 1GbE) +* 1x Crucial CT4G4DFS824A (4GB DDR4 RAM 2400 MT/s, PC4-19200) +* 1x SanDisk Ultra Fit 32GB (USB-A 3.0 SDCZ43-032G-G46 mass storage for OS) +* 1x Supermicro MCP-320-81302-0B (optional FAN tray) + +Optional (10GE) +--------------- +If you want to get additional ethernet ports or even 10GE connectivity +the following optional parts will be required: + +* 1x Supermicro RSC-RR1U-E8 (Riser Card) +* 1x Supermicro MCP-120-00063-0N (Riser Card Bracket) + +Latest VyOS rolling releases boot without any problem on this board. You also +receive a nice IPMI interface realized with an ASPEED AST2400 BMC (no +information about `OpenBMC <https://www.openbmc.org/>`_ so far on this +motherboard). + +Pictures +-------- + +.. figure:: /_static/images/1u_vyos_back.jpg + :scale: 25 % + :alt: CSE-505-203B Back + +.. figure:: /_static/images/1u_vyos_front.jpg + :scale: 25 % + :alt: CSE-505-203B Front + +.. figure:: /_static/images/1u_vyos_front_open_1.jpg + :scale: 25 % + :alt: CSE-505-203B Open 1 + +.. figure:: /_static/images/1u_vyos_front_open_2.jpg + :scale: 25 % + :alt: CSE-505-203B Open 2 + +.. figure:: /_static/images/1u_vyos_front_open_3.jpg + :scale: 25 % + :alt: CSE-505-203B Open 3 + +.. figure:: /_static/images/1u_vyos_front_10ge_open_1.jpg + :scale: 25 % + :alt: CSE-505-203B w/ 10GE Open 1 + +.. figure:: /_static/images/1u_vyos_front_10ge_open_2.jpg + :scale: 25 % + :alt: CSE-505-203B w/ 10GE Open 2 + +.. figure:: /_static/images/1u_vyos_front_10ge_open_3.jpg + :scale: 25 % + :alt: CSE-505-203B w/ 10GE Open 3 + +.. figure:: /_static/images/1u_vyos_front_10ge_open_4.jpg + :scale: 25 % + :alt: CSE-505-203B w/ 10GE Open + + +.. _pc-engines-apu4: + +PC Engines APU4 +================ + +As this platform seems to be quite common in terms of noise, cost, power and +performance it makes sense to write a small installation manual. + +This guide was developed using an APU4C4 board with the following specs: + +* AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI + support, 32K data + 32K instruction cache per core, shared 2MB L2 cache. +* 4 GB DDR3-1333 DRAM, with optional ECC support +* About 6 to 10W of 12V DC power depending on CPU load +* 2 miniPCI express (one with SIM socket for 3G modem). +* 4 Gigabit Ethernet channels using Intel i211AT NICs + +The board can be powered via 12V from the front or via a 5V onboard connector. + +.. _vyos-on-baremetal:apu4_shopping: + +Shopping Cart +------------- + +* 1x apu4c4 = 4 i211AT LAN / AMD GX-412TC CPU / 4 GB DRAM / dual SIM +* 1x Kingston SUV500MS/120G +* 1x VARIA Group Item 326745 19" dual rack for APU4 + +The 19" enclosure can accommodate up to two APU4 boards - there is a single and +dual front cover. + +Extension Modules +^^^^^^^^^^^^^^^^^ + +WiFi +"""" + +Refer to :ref:`wireless-interface` for additional information, below listed +modules have been tested successfully on this Hardware platform: + +* Compex WLE900VX mini-PCIe WiFi module, only supported in mPCIe slot 1. +* Intel Corporation AX200 mini-PCIe WiFi module, only supported in mPCIe slot 1. + (see :ref:`wireless-interface-intel-ax200`) + +WWAN +"""" + +Refer to :ref:`wwan-interface` for additional information, below listed modules +have been tested successfully on this Hardware platform using VyOS 1.3 +(equuleus): + +* Sierra Wireless AirPrime MC7304 miniPCIe card (LTE) +* Sierra Wireless AirPrime MC7430 miniPCIe card (LTE) +* Sierra Wireless AirPrime MC7455 miniPCIe card (LTE) +* Sierra Wireless AirPrime MC7710 miniPCIe card (LTE) +* Huawei ME909u-521 miniPCIe card (LTE) + +VyOS 1.2 (crux) +--------------- + +Depending on the VyOS versions you intend to install there is a difference in +the serial port settings (:vytask:`T1327`). + +Create a bootable USB pendrive using e.g. Rufus_ on a Windows machine. + +Connect serial port to a PC through null modem cable (RXD / TXD crossed over). +Set terminal emulator to 115200 8N1. + +.. stop_vyoslinter +.. code-block:: none + + PC Engines apu4 + coreboot build 20171130 + BIOS version v4.6.4 + 4080 MB ECC DRAM + SeaBIOS (version rel-1.11.0.1-0-g90da88d) + + Press F10 key now for boot menu: + + Select boot device: + + 1. ata0-0: KINGSTON SUV500MS120G ATA-11 Hard-Disk (111 GiBytes) + 2. USB MSC Drive Generic Flash Disk 8.07 + 3. Payload [memtest] + 4. Payload [setup] + +.. start_vyoslinter + + +Now boot from the ``USB MSC Drive Generic Flash Disk 8.07`` media by pressing +``2``, the VyOS boot menu will appear, just wait 10 seconds or press ``Enter`` +to continue. + +.. code-block:: none + + lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk + x VyOS - Boot Menu x + tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu + x Live (amd64-vyos) x + x Live (amd64-vyos failsafe) x + x x + mqqqqqqPress ENAutomatic boot in 10 seconds...nu entryqqqqqqqj + +The image will be loaded and the last lines you will get will be: + +.. code-block:: none + + Loading /live/vmlinuz... ok + Loading /live/initrd.img... + +The Kernel will now spin up using a different console setting. Set terminal +emulator to 9600 8N1 and after a while your console will show: + +.. code-block:: none + + Loading /live/vmlinuz... ok + Loading /live/initrd.img... + Welcome to VyOS - vyos ttyS0 + + vyos login: + +You can now proceed with a regular image installation as described in +:ref:`installation`. + +As the APU board itself still used a serial setting of 115200 8N1 it is +strongly recommended that you change the VyOS serial interface settings after +your first successful boot. + +Use the following command to adjust the :ref:`serial-console` settings: + +.. code-block:: none + + set system console device ttyS0 speed 115200 + +.. note:: Once you ``commit`` the above changes access to the serial interface + is lost until you set your terminal emulator to 115200 8N1 again. + +.. code-block:: none + + vyos@vyos# show system console + device ttyS0 { + speed 115200 + } + +VyOS 1.2 (rolling) +------------------ + +Installing the rolling release on an APU2 board does not require any change +on the serial console from your host side as :vytask:`T1327` was successfully +implemented. + +Simply proceed with a regular image installation as described in +:ref:`installation`. + +.. _vyos-on-baremetal:apu4_pictures: + +Pictures +-------- + +.. note:: Both device types operate without any moving parts and emit zero + noise. + +Rack Mount +^^^^^^^^^^ + +.. figure:: /_static/images/apu4_rack_1.jpg + :scale: 25 % + :alt: APU4 rack closed + +.. figure:: /_static/images/apu4_rack_2.jpg + :scale: 25 % + :alt: APU4 rack front + +.. figure:: /_static/images/apu4_rack_3.jpg + :scale: 25 % + :alt: APU4 rack module #1 + +.. figure:: /_static/images/apu4_rack_4.jpg + :scale: 25 % + :alt: APU4 rack module #2 + +.. figure:: /_static/images/apu4_rack_5.jpg + :scale: 25 % + :alt: APU4 rack module #3 with PSU + +VyOS custom print +""""""""""""""""" + +.. figure:: /_static/images/apu4_rack_vyos_print.jpg + :scale: 25 % + :alt: APU4 custom VyOS powder coat + +Desktop / Bench Top +^^^^^^^^^^^^^^^^^^^ + +.. figure:: /_static/images/apu4_desk_1.jpg + :scale: 25 % + :alt: APU4 desktop closed + +.. figure:: /_static/images/apu4_desk_2.jpg + :scale: 25 % + :alt: APU4 desktop closed + +.. figure:: /_static/images/apu4_desk_3.jpg + :scale: 25 % + :alt: APU4 desktop back + +.. figure:: /_static/images/apu4_desk_4.jpg + :scale: 25 % + :alt: APU4 desktop back + +.. _Rufus: https://rufus.ie/ + +Qotom Q355G4 +============ + +The install on this Q355G4 box is pretty much plug and play. The port numbering +the OS does might differ from the labels on the outside, but the UEFI firmware +has a port blink test built in with MAC addresses so you can very quickly +identify which is which. MAC labels are on the inside as well, and this test +can be done from VyOS or plain Linux too. Default settings in the UEFI will +make it boot, but depending on your installation wishes (i.e. storage type, +boot type, console type) you might want to adjust them. This Qotom company +seems to be the real OEM/ODM for many other relabelling companies like +Protectli. + +Hardware +-------- + +There are a number of other options, but they all seem to be close to Intel +reference designs, with added features like more serial ports, more network +interfaces and the likes. Because they don't deviate too much from standard +designs all the hardware is well-supported by mainline. It accepts one LPDDR3 +SO-DIMM, but chances are that if you need more than that, you'll also want +something even beefier than an i5. There are options for antenna holes, and SIM +slots, so you could in theory add an LTE/Cell modem (not tested so far). + +The chassis is a U-shaped alu extrusion with removable I/O plates and removable +bottom plate. Cooling is completely passive with a heatsink on the SoC with +internal and external fins, a flat interface surface, thermal pad on top of +that, which then directly attaches to the chassis, which has fins as well. It +comes with mounting hardware and rubber feet, so you could place it like a +desktop model or mount it on a VESA mount, or even wall mount it with the +provided mounting plate. The closing plate doubles as internal 2.5" mounting +place for an HDD or SSD, and comes supplied with a small SATA cable and SATA +power cable. + +Power supply is a 12VDC barrel jack, and included switching power supply, which +is why SATA power regulation is on-board. Internally it has a NUC-board-style +on-board 12V input header as well, the molex locking style. + +There are WDT options and auto-boot on power enable, which is great for remote +setups. Firmware is reasonably secure (no backdoors found, BootGuard is enabled +in enforcement mode, which is good but also means no coreboot option), yet has +most options available to configure (so it's not locked out like most firmwares +are). + +An external RS232 serial port is available, internally a GPIO header as well. +It does have Realtek based audio on board for some reason, but you can disable +that. Booting works on both USB2 and USB3 ports. Switching between serial BIOS +mode and HDMI BIOS mode depends on what is connected at startup; it goes into +serial mode if you disconnect HDMI and plug in serial, in all other cases it's +HDMI mode. + +Partaker i5 +=========== + +.. figure:: ../_static/images/600px-Partaker-i5.jpg + +I believe this is actually the same hardware as the Protectli. I purchased it +in June 2018. It came pre-loaded with pfSense. + +`Manufacturer product page <http://www.inctel.com.cn/product/detail/338.html>`_. + +Installation +------------ + +* Write VyOS ISO to USB drive of some sort +* Plug in VGA, power, USB keyboard, and USB drive +* Press "SW" button on the front (this is the power button; I don't know what + "SW" is supposed to mean). +* Begin rapidly pressing delete on the keyboard. The boot prompt is very quick, + but with a few tries you should be able to get into the BIOS. +* Chipset > South Bridge > USB Configuration: set XHCI to Disabled and USB 2.0 + (EHCI) to Enabled. Without doing this, the USB drive won't boot. +* Boot to the VyOS installer and install as usual. + +Warning the interface labels on my device are backwards; the left-most "LAN4" +port is eth0 and the right-most "LAN1" port is eth3. + +Acrosser AND-J190N1 +=================== + +.. figure:: ../_static/images/480px-Acrosser_ANDJ190N1_Front.jpg + +.. figure:: ../_static/images/480px-Acrosser_ANDJ190N1_Back.jpg + +This microbox network appliance was build to create OpenVPN bridges. It can +saturate a 100Mbps link. It is a small (serial console only) PC with 6 Gb LAN + +You may have to add your own RAM and HDD/SSD. There is no VGA connector. But +Acrosser provides a DB25 adapter for the VGA header on the motherboard (not +used). + +BIOS Settings: +-------------- + +First thing you want to do is getting a more user friendly console to configure +BIOS. Default VT100 brings a lot of issues. Configure VT100+ instead. + +For practical issues change speed from 115200 to 9600. 9600 is the default +speed at which both linux kernel and VyOS will reconfigure the serial port +when loading. + +Connect to serial (115200bps). Power on the appliance and press Del in the +console when requested to enter BIOS settings. + +Advanced > Serial Port Console Redirection > Console Redirection Settings: + +* Terminal Type : VT100+ +* Bits per second : 9600 + +Save, reboot and change serial speed to 9600 on your client. + +Some options have to be changed for VyOS to boot correctly. With XHCI enabled +the installer can’t access the USB key. Enable EHCI instead. + +Reboot into BIOS, Chipset > South Bridge > USB Configuration: + +* Disable XHCI +* Enable USB 2.0 (EHCI) Support + +Install VyOS: +------------- + +Create a VyOS bootable USB key. I used the 64-bit ISO (VyOS 1.1.7) and +`LinuxLive USB Creator <http://www.linuxliveusb.com/>`_. + +I'm not sure if it helps the process but I changed default option to live-serial +(line “default xxxx”) on the USB key under syslinux/syslinux.cfg. + +I connected the key to one black USB port on the back and powered on. The first +VyOS screen has some readability issues. Press :kbd:`Enter` to continue. + +Then VyOS should boot and you can perform the ``install image`` + +.. _gowin_gw-fn-1ur1-10g: + +Gowin GW-FN-1UR1-10G +==================== + +A platform utilizing an Intel Alder Lake-N100 CPU with 6M cache, TDP 6W. +Onboard LPDDR5 16GB RAM and 128GB eMMC (can be used for image installation). + +The appliance comes with 2 * 2.5GbE Intel I226-V and 3 * 1GbE Intel I210 +where one supports IEEE802.3at PoE+ (Typical 30W). + +In addition there is a Mellanox ConnectX-3 2* 10GbE SFP+ NIC available. + +**NOTE:** This is the entry level platform. Other derivates exists with +i3-N305 CPU and 2x 25GbE! + +Shopping Cart +------------- + +* 1x Gowin GW-FN-1UR1-10G +* 2x 128GB M.2 NVMe SSDs + +Optional (WiFi + WWAN) +---------------------- + +* 1x MediaTek 7921E M.2 NGFF WIFI module (not tested as this currently leads to a Kernel crash) +* 1x HP LT4120 Snapdragon X5 LTE WWAN module + +Pictures +-------- + +.. figure:: ../_static/images/gowin-01.png + +.. figure:: ../_static/images/gowin-02.png + +.. figure:: ../_static/images/gowin-03.png + +.. figure:: ../_static/images/gowin-04.png + +Cooling +------- + +The device itself is passivly cooled, whereas the power supply has an active fan. +Even if the main processor is powered off, the power supply fan is operating and +the entire chassis draws 7.5W. During operation the chassis drew arround 38W. + +BIOS Settings +------------- + +No settings needed to be altered, everything worked out of the box! + +Installation +------------ + +The system provides a regular RS232 console port using 115200,8n1 setting which +is sufficient to install VyOS from a USB pendrive. + +First Boot +---------- + +Please note that there is a weirdness on the network interface mapping. +The interface <-> MAC mapping is going upwards but the NICs are placed +somehow swapped on the mainboard/MACs programmed in a swapped order. + +See interface description for more detailed mapping. + +.. code-block:: none + + vyos@vyos:~$ show interfaces + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address MAC VRF MTU S/L Description + ----------- -------------- ----------------- ------- ----- ----- ------------- + eth0 - 00:f0:cb:00:00:99 default 1500 u/D Intel I226-V - Front eth2 + eth1 - 00:f0:cb:00:00:9a default 1500 u/D Intel I226-V - Front eth1 + eth2 - 00:f0:cb:00:00:9b default 1500 u/D Intel I210 - Front eth4 + eth3 - 00:f0:cb:00:00:9c default 1500 u/D Intel I210 - Front eth3 + eth4 - 00:f0:cb:00:00:9d default 1500 u/D Intel I210 - Front POE + eth5 - 00:02:c9:00:00:30 default 1500 u/D Mellanox ConnectX-3 - SFP2 + eth6 - 00:02:c9:00:00:31 default 1500 u/D Mellanox ConnectX-3 - SFP1 + lo 127.0.0.1/8 00:00:00:00:00:00 default 65536 u/u + ::1/128 + wwan0 - d2:39:76:8e:05:12 default 1500 A/D + +VyOS 1.4 (sagitta) +^^^^^^^^^^^^^^^^^^ + +Connect serial port to a PC through a USB <-> RJ45 console cable. Set terminal emulator +to 115200 8N1. You can also perform the installation using VGA or HDMI ports. + +In this example I choose to install VyOS as RAID-1 on both NVMe drives. However, a previous +installation on the 128GB eMMC storage worked without any issues, too. + +.. code-block:: none + + Welcome to VyOS - vyos ttyS0 + + vyos login: + +Perform Image installation using `install image` CLI command. This installation uses two 128GB NVMe +disks setup as RAID1. + +.. code-block:: none + + Welcome to VyOS! + + ┌── ┐ + . VyOS 1.4.0 + └ ──┘ sagitta + + * Support portal: https://support.vyos.io + * Documentation: https://docs.vyos.io/en/sagitta + * Project news: https://blog.vyos.io + * Bug reports: https://vyos.dev + + You can change this banner using "set system login banner post-login" command. + + VyOS is a free software distribution that includes multiple components, + you can check individual component licenses under /usr/share/doc/*/copyright + Use of this pre-built image is governed by the EULA you can find in + /usr/share/vyos/EULA + + vyos@vyos:~$ install image + + Welcome to VyOS installation! + This command will install VyOS to your permanent storage. + Would you like to continue? [y/N] y + + What would you like to name this image? (Default: 1.4.0) + + Please enter a password for the "vyos" user: + Please confirm password for the "vyos" user: + + What console should be used by default? (K: KVM, S: Serial)? (Default: S) + + Probing disks + 4 disk(s) found + Would you like to configure RAID-1 mirroring? [Y/n] y + + The following disks were found: + /dev/sda (14.4 GB) + /dev/mmcblk0 (116.5 GB) + Would you like to configure RAID-1 mirroring on them? [Y/n] n + + Would you like to choose two disks for RAID-1 mirroring? [Y/n] y + Disks available: + 1: /dev/sda (14.4 GB) + 2: /dev/mmcblk0 (116.5 GB) + 3: /dev/nvme1n1 (119.2 GB) + 4: /dev/nvme0n1 (119.2 GB) + Select first disk: 3 + + Remaining disks: + 1: /dev/sda (14.4 GB) + 2: /dev/mmcblk0 (116.5 GB) + 3: /dev/nvme0n1 (119.2 GB) + Select second disk: 3 + + Installation will delete all data on both drives. Continue? [y/N] y + + Searching for data from previous installations + No previous installation found + Creating partitions on /dev/nvme1n1 + Creating partition table... + Creating partitions on /dev/nvme0n1 + Creating partition table... + Creating RAID array + Updating initramfs + Creating filesystem on RAID array + The following config files are available for boot: + 1: /opt/vyatta/etc/config/config.boot + 2: /opt/vyatta/etc/config.boot.default + + Which file would you like as boot config? (Default: 1) + Creating temporary directories + Mounting new partitions + Creating a configuration file + Copying system image files + Installing GRUB configuration files + Installing GRUB to the drives + Cleaning up + Unmounting target filesystems + Removing temporary files + The image installed successfully; please reboot now. + +Hardware +-------- + +.. code-block:: none + + vyos@vyos:~$ lspci + 00:00.0 Host bridge: Intel Corporation Device 461c + 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics] + 00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01) + 00:0d.0 USB controller: Intel Corporation Device 464e + 00:14.0 USB controller: Intel Corporation Device 54ed + 00:14.2 RAM memory: Intel Corporation Device 54ef + 00:15.0 Serial bus controller: Intel Corporation Device 54e8 + 00:16.0 Communication controller: Intel Corporation Device 54e0 + 00:1a.0 SD Host controller: Intel Corporation Device 54c4 + 00:1c.0 PCI bridge: Intel Corporation Device 54b8 + 00:1c.2 PCI bridge: Intel Corporation Device 54ba + 00:1c.3 PCI bridge: Intel Corporation Device 54bb + 00:1c.6 PCI bridge: Intel Corporation Device 54be + 00:1d.0 PCI bridge: Intel Corporation Device 54b0 + 00:1f.0 ISA bridge: Intel Corporation Device 5481 + 00:1f.4 SMBus: Intel Corporation Device 54a3 + 00:1f.5 Serial bus controller: Intel Corporation Device 54a4 + 01:00.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 02:00.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 02:02.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 02:06.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 02:0e.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 03:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) + 04:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) + 05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter + 06:00.0 SATA controller: ASMedia Technology Inc. Device 0622 (rev 01) + 07:00.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 08:00.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 08:02.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 08:06.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 08:0e.0 PCI bridge: ASMedia Technology Inc. Device 1806 (rev 01) + 09:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) + 0a:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) + 0b:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) + 0d:00.0 Non-Volatile memory controller: Device 1ed0:2283 + 0f:00.0 Non-Volatile memory controller: Device 1ed0:2283 + 11:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3] + +.. code-block:: none + + vyos@vyos:~$ lsusb + Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 003 Device 005: ID 0e8d:c616 MediaTek Inc. Wireless_Device + Bus 003 Device 003: ID 413c:2113 Dell Computer Corp. KB216 Wired Keyboard + Bus 003 Device 004: ID 03f0:9d1d HP, Inc HP lt4120 Snapdragon X5 LTE + Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub + Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 002: ID 05e3:0620 Genesys Logic, Inc. GL3523 Hub + Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + +WWAN +^^^^ + +The LTE module can be enabled as simple as this config snippet: + +.. code-block:: none + + interfaces { + wwan wwan0 { + address "dhcp" + apn "YOUR-APN-GOES-HERE" + } + } + +For more information please refer to chapter: :ref:`wwan-interface` |