diff options
Diffstat (limited to 'docs/interfaces/bond.rst')
| -rw-r--r-- | docs/interfaces/bond.rst | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/docs/interfaces/bond.rst b/docs/interfaces/bond.rst index 74089f96..d697e5d4 100644 --- a/docs/interfaces/bond.rst +++ b/docs/interfaces/bond.rst @@ -159,6 +159,25 @@ Link Administration This mode provides load balancing and fault tolerance. +.. cfgcmd:: set interfaces bonding <interface> min-links <0-16> + + Specifies the minimum number of links that must be active before asserting + carrier. It is similar to the Cisco EtherChannel min-links feature. This + allows setting the minimum number of member ports that must be up (link-up + state) before marking the bond device as up (carrier on). This is useful for + situations where higher level services such as clustering want to ensure a + minimum number of low bandwidth links are active before switchover. + + This option only affects 802.3ad mode. + + The default value is 0. This will cause carrier to be asserted (for 802.3ad + mode) whenever there is an active aggregator, regardless of the number of + available links in that aggregator. + + .. note:: Because an aggregator cannot be active without at least one + available link, setting this option to 0 or to 1 has the exact same + effect. + .. cfgcmd:: set interfaces bonding <interface> hash-policy <policy> * **layer2** - Uses XOR of hardware MAC addresses and packet type ID field |