diff options
Diffstat (limited to 'docs/interfaces/bond.rst')
| -rw-r--r-- | docs/interfaces/bond.rst | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/docs/interfaces/bond.rst b/docs/interfaces/bond.rst index 2de753d5..880c7580 100644 --- a/docs/interfaces/bond.rst +++ b/docs/interfaces/bond.rst @@ -8,13 +8,13 @@ logical one. It's called bonding, or LAG, or ether-channel, or port-channel. Create interface bondX, where X is just a number: -.. code-block:: console +.. code-block:: none set interfaces bonding bond0 description 'my-sw1 int 23 and 24' You are able to choose a hash policy: -.. code-block:: console +.. code-block:: none vyos@vyos# set interfaces bonding bond0 hash-policy Possible completions: @@ -24,20 +24,20 @@ You are able to choose a hash policy: For example: -.. code-block:: console +.. code-block:: none set interfaces bonding bond0 hash-policy 'layer2' You may want to set IEEE 802.3ad Dynamic link aggregation (802.3ad) AKA LACP (don't forget to setup it on the other end of these links): -.. code-block:: console +.. code-block:: none set interfaces bonding bond0 mode '802.3ad' or some other modes: -.. code-block:: console +.. code-block:: none vyos@vyos# set interfaces bonding bond0 mode Possible completions: @@ -54,7 +54,7 @@ or some other modes: Now bond some physical interfaces into bond0: -.. code-block:: console +.. code-block:: none set interfaces bonding bond0 member interface eth0 set interfaces bonding bond0 member interface eth1 @@ -64,7 +64,7 @@ change its` duplex, for example) and assign IPs or VIFs on it. You may check the result: -.. code-block:: console +.. code-block:: none vyos@vyos# run sh interfaces bonding Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down |