summaryrefslogtreecommitdiff
path: root/docs/interfaces/dummy.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/interfaces/dummy.rst')
-rw-r--r--docs/interfaces/dummy.rst79
1 files changed, 0 insertions, 79 deletions
diff --git a/docs/interfaces/dummy.rst b/docs/interfaces/dummy.rst
deleted file mode 100644
index c36d0024..00000000
--- a/docs/interfaces/dummy.rst
+++ /dev/null
@@ -1,79 +0,0 @@
-.. _dummy-interface:
-
-#####
-Dummy
-#####
-
-The dummy interface is really a little exotic, but rather useful nevertheless.
-Dummy interfaces are much like the :ref:`loopback-interface` interface, except
-you can have as many as you want.
-
-.. note:: Dummy interfaces can be used as interfaces that always stay up (in
- the same fashion to loopbacks in Cisco IOS), or for testing purposes.
-
-.. hint:: A Dummy interface is always up, thus it could be used for
- management traffic or as source/destination for and :abbr:`IGP (Interior
- Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependent
- on physical link states and multiple routes can be chosen to the
- destination. A :ref:`dummy-interface` Interface should always be preferred
- over a :ref:`loopback-interface` interface.
-
-*************
-Configuration
-*************
-
-Common interface configuration
-==============================
-
-.. cmdinclude:: ../_include/interface-address.txt
- :var0: dummy
- :var1: dum0
-
-.. cmdinclude:: ../_include/interface-description.txt
- :var0: dummy
- :var1: dum0
-
-.. cmdinclude:: ../_include/interface-disable.txt
- :var0: dummy
- :var1: dum0
-
-.. cmdinclude:: ../_include/interface-vrf.txt
- :var0: dummy
- :var1: dum0
-
-*********
-Operation
-*********
-
-.. opcmd:: show interfaces dummy
-
- Show brief interface information.information
-
- .. code-block:: none
-
- vyos@vyos:~$ show interfaces dummy
- Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
- Interface IP Address S/L Description
- --------- ---------- --- -----------
- dum0 172.18.254.201/32 u/u
-
-.. opcmd:: show interfaces dummy <interface>
-
- Show detailed information on given `<interface>`
-
- .. code-block:: none
-
- vyos@vyos:~$ show interfaces ethernet eth0
- dum0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
- link/ether 26:7c:8e:bc:fc:f5 brd ff:ff:ff:ff:ff:ff
- inet 172.18.254.201/32 scope global dum0
- valid_lft forever preferred_lft forever
- inet6 fe80::247c:8eff:febc:fcf5/64 scope link
- valid_lft forever preferred_lft forever
-
- RX: bytes packets errors dropped overrun mcast
- 0 0 0 0 0 0
- TX: bytes packets errors dropped carrier collisions
- 1369707 4267 0 0 0 0
-
-