diff options
Diffstat (limited to 'docs/interfaces/ethernet.rst')
| -rw-r--r-- | docs/interfaces/ethernet.rst | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst index d0537b41..693634fb 100644 --- a/docs/interfaces/ethernet.rst +++ b/docs/interfaces/ethernet.rst @@ -10,7 +10,7 @@ Configuration Address ------- -.. cfgcmd:: set interfaces ethernet '<interface>' address <address | dhcp | dhcpv6> +.. cfgcmd:: set interfaces ethernet <interface> address <address | dhcp | dhcpv6> Configure ethernet interface `<interface>` with one or more interface addresses. @@ -31,7 +31,7 @@ Address set interfaces ethernet eth0 address 2001:db8::ffff/64 set interfaces ethernet eth0 address 2001:db8:100::ffff/64 -.. cfgcmd:: set interfaces ethernet '<interface>' ipv6 address autoconf +.. cfgcmd:: set interfaces ethernet <interface> ipv6 address autoconf :abbr:`SLAAC (Stateless Address Autoconfiguration)` :rfc:`4862`. IPv6 hosts can configure themselves automatically when connected @@ -45,7 +45,7 @@ Address .. note:: This method automatically disables IPv6 traffic forwarding on the interface in question. -.. cfgcmd:: set interfaces ethernet '<interface>' ipv6 address eui64 '<prefix>' +.. cfgcmd:: set interfaces ethernet <interface> ipv6 address eui64 <prefix> :abbr:`EUI-64 (64-Bit Extended Unique Identifier)` as specified in :rfc:`4291` allows a host to assign iteslf a unique 64-Bit IPv6 address. @@ -57,7 +57,7 @@ Address Speed/Duplex ------------ -.. cfgcmd:: set interfaces ethernet '<interface>' duplex <auto | full | half> +.. cfgcmd:: set interfaces ethernet <interface> duplex <auto | full | half> Configure physical interface duplex setting. @@ -67,7 +67,7 @@ Speed/Duplex VyOS default will be `auto`. -.. cfgcmd:: set interfaces ethernet '<interface>' speed <auto | 10 | 100 | 1000 | 2500 | 5000 | 10000 | 25000 | 40000 | 50000 | 100000> +.. cfgcmd:: set interfaces ethernet <interface> speed <auto | 10 | 100 | 1000 | 2500 | 5000 | 10000 | 25000 | 40000 | 50000 | 100000> Configure physical interface speed setting. @@ -88,27 +88,27 @@ Speed/Duplex Link Administration ------------------- -.. cfgcmd:: set interfaces ethernet '<interface>' description '<description>' +.. cfgcmd:: set interfaces ethernet <interface> description <description> Assign given `<description>` to interface. Description will also be passed to SNMP monitoring systems. -.. cfgcmd:: set interfaces ethernet '<interface>' disable +.. cfgcmd:: set interfaces ethernet <interface> disable Disable given `<interface>`. It will be placed in administratively down state. -.. cfgcmd:: set interfaces ethernet '<interface>' disable-flow-control +.. cfgcmd:: set interfaces ethernet <interface> disable-flow-control Disable Ethernet flow control (pause frames). -.. cfgcmd:: set interfaces ethernet '<interface>' mac '<mac-address>' +.. cfgcmd:: set interfaces ethernet <interface> mac <mac-address> Configure user defined :abbr:`MAC (Media Access Control)` address on given `<interface>`. -.. cfgcmd:: set interfaces ethernet '<interface>' mtu '<mtu>' +.. cfgcmd:: set interfaces ethernet <interface> mtu <mtu> Configure :abbr:`MTU (Maximum Transmission Unit)` on given `<interface>`. It is the size (in bytes) of the largest ethernet frame sent on this link. @@ -119,11 +119,11 @@ Router Advertisements Router advertisements are described in :rfc:`4861#section-4.6.2`. They are part of what is known as :abbr:`SLAAC (Stateless Address Autoconfiguration)`. -.. cfgcmd:: set interfaces ethernet '<interface>' ipv6 router-advert send-advert <true | false> +.. cfgcmd:: set interfaces ethernet <interface> ipv6 router-advert send-advert <true | false> Enable or disable router advertisements in this `<interface>`. -.. cfgcmd:: set interfaces ethernet '<interface>' ipv6 router-advert prefix '<prefix>' +.. cfgcmd:: set interfaces ethernet <interface> ipv6 router-advert prefix <prefix> Prefix information is described in :rfc:`4861#section-4.6.2`. @@ -144,7 +144,7 @@ Operation eth1 172.18.202.11/24 u/u WAN eth2 - u/D -.. opcmd:: show interfaces ethernet '<interface>' +.. opcmd:: show interfaces ethernet <interface> Show detailed information on given `<interface>` @@ -161,7 +161,7 @@ Operation TX: bytes packets errors dropped carrier collisions 5601460 62595 0 0 0 0 -.. opcmd:: show interfaces ethernet '<interface>' physical +.. opcmd:: show interfaces ethernet <interface> physical Show information about physical `<interface>` @@ -200,7 +200,7 @@ Operation supports-register-dump: yes supports-priv-flags: no -.. opcmd:: show interfaces ethernet '<interface>' transceiver +.. opcmd:: show interfaces ethernet <interface> transceiver Show transceiver information from plugin modules, e.g SFP+, QSFP |