diff options
Diffstat (limited to 'docs/interfaces/pppoe.rst')
| -rw-r--r-- | docs/interfaces/pppoe.rst | 68 |
1 files changed, 21 insertions, 47 deletions
diff --git a/docs/interfaces/pppoe.rst b/docs/interfaces/pppoe.rst index 8fa35492..e85c16aa 100644 --- a/docs/interfaces/pppoe.rst +++ b/docs/interfaces/pppoe.rst @@ -54,6 +54,24 @@ vDSL/aDSL understands. Configuration ============= +Common interface configuration +------------------------------ + +.. cmdinclude:: ../_include/interface-description.txt + :var0: pppoe + :var1: pppoe0 + +.. cmdinclude:: ../_include/interface-disable.txt + :var0: pppoe + :var1: pppoe0 + +.. cmdinclude:: ../_include/interface-vrf.txt + :var0: pppoe + :var1: pppoe0 + +PPPoE specific configuration +---------------------------- + .. cfgcmd:: set interfaces pppoe <interface> access-concentrator <name> Use this command to restrict the PPPoE session on a given access @@ -102,16 +120,6 @@ Configuration **default:** A default route to the remote endpoint is automatically added when the link comes up (i.e. auto). -.. cfgcmd:: set interfaces pppoe <interface> description - - Assign given `<description>` to interface. Description will also be passed - to SNMP monitoring systems. - -.. cfgcmd:: set interfaces pppoe <interface> disable - - Disable given `<interface>`. It will be placed in administratively down - (``A/D``) state. - .. cfgcmd:: set interfaces pppoe <interface> idle-timeout <time> Use this command to set the idle timeout interval to be used with on-demand @@ -167,43 +175,9 @@ IPv6 Use this command to enable acquisition of IPv6 address using stateless autoconfig (SLAAC). -Prefix Delegation (DHCPv6-PD) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -VyOS 1.3 (equuleus) supports DHCPv6-PD. DHCPv6 Prefix Delegation is supported -by most ISPs who provide native IPv6 for consumers on fixed networks. - -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option pd <id> length <length> - - Some ISPs by default only delegate a /64 prefix. To request for a specific - prefix size use this option to request for a bigger delegation for this pd - `<id>`. This value - is in the range from 32 - 64 so you could request up to /32 down to a /64 - delegation. - - Default value is 64. - -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option pd <id> interface <delegatee> address <address> - - Specify the interface address used locally on the interfcae where the prefix - has been delegated to. ID must be a decimal integer. - - It will be combined with the delegated prefix and the sla-id to form a complete - interface address. The default is to use the EUI-64 address of the interface. - - Example: - - Using ``<id>`` value 65535 will assign IPv6 address ``<prefix>::ffff`` to the - interface. - -.. cfgcmd:: set interfaces pppoe <interface> dhcpv6-option pd <id> interface <delegatee> sla-id <id> - - Specify the identifier value of the site-level aggregator (SLA) on the - interface. ID must be a decimal number greater then 0 which fits in the length - of SLA IDs (see below). For example, if ID is 1 and the client is delegated - an IPv6 prefix 2001:db8:ffff::/48, dhcp6c will combine the two values into a - single IPv6 prefix, 2001:db8:ffff:1::/64, and will configure the prefix on - the specified interface. +.. cmdinclude:: ../_include/interface-dhcpv6-prefix-delegation.txt + :var0: pppoe + :var1: pppoe0 Operation ========= |